Co-op Conversations with DEMCO

When your electric bill changes, it helps to understand what you are actually paying for. In this episode, DEMCO Finance Director Nick Smith explains how electric rates are determined and approved, what the Grid Access, Delivery and Wholesale Power charges pay for, and why some charges are fixed while others are tied to electricity use. He also explains the two-month timing of wholesale power costs and how a bill can increase even when DEMCO’s approved rates have not changed.

What is Co-op Conversations with DEMCO?

Discover Co-op Conversations with DEMCO as we explore the power of a local member-owned not-for-profit electric cooperative. Since 1938, DEMCO has woven cooperative principles into every wire, and our business isn’t just about electricity.

At DEMCO, we’re more than just an electric company, and our work, is more than just a job. As a local member-owned cooperative, we are your neighbors, your family and your friends. We exist to serve you, and we take a lot of pride in all that we do.

Our mission is to enhance the quality of life for our members, employees, and communities by safely providing reliable and competitively priced energy services. You’ve probably seen us out in the community—at events on and off duty—doing what we can to make a difference.

And now, you can hear us on your favorite podcast platform as we discuss what makes cooperatives special and inform the community about how we are striving to serve you in everything we do.

DEMCO, Powering life and community, that’s the cooperative difference!

David Latona:
Welcome to Co-op Conversations with DEMCO,
where we talk about the topics that impact your power,

your co-op, and your community. I'm your host,
David Latona.

When your electric bill goes up,
it is natural to wonder, did DEMCO raise the rate?

Well, today we're answering that question.

We'll explain when and why DEMCO base rates change,
the process for those changes and why your bill changes from

month to month. Joining me is DEMCO's finance director Nick
Smith.

Nick, thanks for being here.

Nick Smith:
Thanks, David. I'm so glad to be here.

David Latona:
As a DEMCO member myself, I know rates may not sound like the
most exciting topic,

but preparing for this episode reminded me just how helpful this
information can be.

Every month our members receive an electric bill and most of us
probably look at the amount due.

Today we're going to look at what's behind all of that.

Before we get into how rates are set,
let's answer a question that we hear a lot.

Does DEMCO raise its rates throughout the year,
from month to month,

or from season to season?

Nick Smith:
So I totally understand why people ask that.

And honestly, I didn't really understand it until I started
working for DEMCO as well.

But no, DEMCO does not change its approved base rates seasonally
or from month to month.

Changing those rates requires an extensive regulatory process
that can take about two years.

And so our current tariff was approved by the Louisiana Public
Service Commission in 2025 and took effect in January of

2026. Those rates and terms of service are available on
DEMCO.org,

and the complete tariff is also on file with the Commission.

David Latona:
Okay, but isn't a tariff actually a tax?

Nick Smith:
Yes, and that is a very confusing term.

But in the electric utility industry,
a tariff is the official document that sets out a utility's rates

and terms of service. And so it explains how electric service is
priced,

how the charges are calculated and the rules that apply to
providing service.

It does not mean a tax or an additional charge on your electric
bill.

David Latona:
Okay, so when a member receives a higher bill,
that does not automatically mean the rate increased.

Nick Smith:
Totally correct. A rate is the price used to calculate a charge.

And then there are several charges on the bill that are based on
the number of kilowatt hours,

or commonly referred to as kWh,
used during that specific billing period.

David Latona:
Okay. Now that we've made that distinction,
let's talk about how and when DEMCO's rates can change.

Our member can see a little fluctuation.

Is there a regular schedule, and what must happen before a new
rate takes effect?

Nick Smith:
So before seeking a rate change,
DEMCO must complete a cost of service study.

And that happens every several years or when the rates no longer
match the cost to provide that service.

And so, because DEMCO is regulated by the Louisiana Public
Service Commission,

DEMCO must prepare and file its proposed rates and supporting
financial and operational information with the Commission.

And then this filing goes through a very detailed regulatory
review.

And so this process includes public notice,
public hearings, the filing of testimony,

data requests by the Commission and their consultants,
potentially a review by an administrative law judge.

And at the end of this entire process,
the commissioners ultimately vote on whether to approve the

proposed tariff. And so DEMCO can't really put base rates into
effect until the process is complete,

and the tariff is fully approved.

David Latona:
That's a lot.

Nick Smith:
It's a lot. It's a lot.

David Latona:
So let's start with that. Can you tell me a little more what is
involved with just the cost of service study?

Nick Smith:
Absolutely. So a cost of service study examines what it costs
DEMCO to provide electric service to the members.

And there's a lot of costs that go into that.

So that includes the cost of maintaining and improving the
electric system,

operating our substations and equipment,
responding to outages, serving members,

meeting safety and regulatory requirements, and providing the
employees and resources needed to

operate the cooperative.

David Latona:
So I get it. And that list you give of those things that DEMCO
provides,

that's, just like you said earlier,
something you didn't know before you started working here.

When I started working here, I didn't know either. It takes so
many different things to provide power to those members.

Nick Smith:
It does. It does.

David Latona:
So DEMCO must provide the data behind a proposed change.

It's not simply a matter of deciding what it would like to
charge.

Nick Smith:
That's correct. So a rate filing requires extensive preparation
documentation and review.

The first of that it starts at our local,
member-elected board.

So we go through the process of determining what's required for
our revenue requirements.

And then once we determine that and get that approved by the
board,

we file the request with the Louisiana Public Service Commission,

and they review the information from there.

David Latona:
So until that process is complete and a new tariff is approved,
DEMCO must continue following the rates already

on file. Is that right?

Nick Smith:
That's correct. We are always required to follow the approved
tariff on file.

David Latona:
Okay. So how does being a not-for-profit electric cooperative
factor into the rate

setting process?

Nick Smith:
This is a very important distinction.

So DEMCO is a member-owned, not-for-profit electric distribution
cooperative,

meaning that our rates are designed to recover the cost of
providing that electric service,

which includes the purchasing of the electricity and then
maintaining the system needed to deliver it safely and reliably.

DEMCO does not have any outside shareholders receiving profits,
and so the revenue supports the operation,

maintenance and long term needs of the electric system that
serves our members.

David Latona:
So the purpose of the rate is to collect the revenue needed to
operate the cooperative and

provide electric service, not to create a profit to outside
investors.

Nick Smith:
That is absolutely correct.

David Latona:
Okay. You mentioned two major costs:
purchasing the electricity and delivering it.

That's two very large pieces of that rate puzzle.

Can you explain the difference in those two?

Nick Smith:
So being an electric distribution cooperative,
we operate and maintain the local system that delivers the

electricity to our members. But we do not generate that
electricity.

So we purchase power on behalf of our members through what we
call a power supply agreement.

And DEMCO then delivers that electricity through the substations,

power lines and poles and transformers and any other equipment
across our service area.

And so there are two different parts for providing that electric
service. First,

the electricity must be generated and supplied.

And as I stated, DEMCO purchases that power for its members.

And second, we must operate and maintain the system that carries
that electricity to homes and businesses in our

service territory.

David Latona:
And both of those costs are reflected in the member's bill.

Nick Smith:
Yes, these charges are separated so the members can see the cost
of having access to the electric grid,

the cost of delivering that electricity,
and then the cost of the wholesale power itself.

David Latona:
Okay, let's walk through the main charges members see on their
bills.

Nick Smith:
So the grid access charge is the fixed monthly fee.

This applies to active meters connected to DEMCO's electric
system.

And so it helps cover the costs that exist whether a member uses
a little bit of electricity or a lot during the month.

The system must be available and ready to serve that member or
that meter at all points in time,

no matter how much electricity they plan on using.

David Latona:
Okay, so that grid access charge is not based on the amount of
kilowatt hours a member uses.

Nick Smith:
That's correct. It is just a fixed monthly fee.

David Latona:
Okay. What about the delivery charge?

Nick Smith:
So the delivery charge is usage based.

It reflects DEMCO's cost of operating,
maintaining and improving the distribution system that delivers

electricity to the members. This charge is calculated using the
number of kilowatt hours recorded by the meter each month.

And so for residential members who use more than 1,000 kilowatt
hours,

the delivery charge may appear on two lines because the approved
tariff for the residential rate has two usage levels,

and so electricity used up to 1,000 kilowatt hours,
is billed at one delivery rate,

while electricity used above 1,000 kilowatt hours is billed at
another.

David Latona:
Okay, so tell me a little bit more about the thinking behind that
difference.

Nick Smith:
Yes. So this rate was designed based on a study of how our
membership actually uses the electricity.

So the study showed that members who use less than 1,000 kilowatt
hours are often households with lower incomes.

The lower rate for the first thousand kilowatt hours helps those
members, but it's not limited to just them.

Every residential member receives the lower rate for the first
thousand kilowatt hours used during that billing period.

And then the second rate only applies to the electricity used
above that amount.

And so it's a benefit that all the members enjoy while also
helping a subset of our membership who need it the most.

David Latona:
Okay, that's good to know. There's a lot of thought behind this
particular rate structure.

So let's talk about the wholesale power charge.

What is that, and how is that different from what I'm already
paying in the delivery charge?

Nick Smith:
So the delivery charge pays for DEMCO's system that carries the
electricity to our members,

while the wholesale power charge pays for the electricity itself.

David Latona:
Okay. When I, as a member, when I look at my bill,
I see that the delivery charge rates stay the

same from month to month, my usage changes.

I see those kilowatt hours like we just talked about.

There's one rate for the first thousand,
another rate for usage over a thousand.

That's clear. But the wholesale power charge can change from
month to month.

Why is that?

Nick Smith:
So here's what's happening. During the last quarter of each year,

DEMCO works with NextEra, our power supplier,
to plan for the following year.

We look at years of information and how much electricity our
members have used,

and we consider expected market prices and other factors to
project how much power our members will need and what it will

cost during the coming year. But that actual electricity use does
not always match these projections.

Extreme heat, severe cold storms and other conditions can cause
members to use more electricity than expected.

And so when that happens, DEMCO must purchase that additional
power.

If we need the additional power during a period of high demand,
when the power supply may be limited,

it can cost more. And so DEMCO must always purchase enough power
to meet our members' needs,

and we must account for that additional cost.

So at the end of the year, we look at whether our actual power
costs were higher or lower than projected.

That difference is what we roll into, the power cost and the
wholesale power charge for

the following year.

David Latona:
So if the projected cost of wholesale power changes for the
coming year,

why not apply the full change in January and leave the rate the
same for the rest of the year?

Nick Smith:
So, to lessen the impact, DEMCO gradually adjusts the wholesale
power charge over the year.

We spread that change across several months instead of applying
the full amount in January.

And remember, the rate is only one part of the calculation.

The total wholesale power charge on a member's bill also depends
on how many kilowatt hours that member uses for that

specific billing period.

David Latona:
There's also, as I see my bill here,
there's also a formula rate plan adjustment on the bill.

Nick Smith:
So yes, the formula rate plan is an annual adjustment established
through the approved regulatory process.

It is set in July and remains in place through the following
June.

And it does not change from month to month during that period.

And depending on the annual calculation,
it may appear as a charge or a credit on the bill.

David Latona:
Can you just dig a little deeper on that and tell me,
why would it show as a charge or a credit in a given year.

Nick Smith:
So rates are established using cost information available at the
time that those rates are set.

But actual cost of operating the electric system changes over
time.

And so the FRP provides a regular way to account for those
changes without having to reset base rates every time those

costs change. Because actual costs can be higher or lower,
the FRP can be a charge or a credit.

David Latona:
This is where the language can become confusing for maybe a
consumer like me.

We've said DEMCO does not change its approved base rates
seasonally or from month to month,

but some charges on the bill still vary.

How can both statements be true?

Nick Smith:
So a rate and a total charge are not the same thing.

The rate is the price used in the calculation,
whereas the total charge also depends on how many kilowatt hours

the member used for that month. Think about buying gasoline.

The price per gallon may be the same on two visits,
but if you purchase more gallons during the second visit,

you will pay more. Electricity works in a very similar way.

If a member uses more kilowatt hours,
the total usage based charges will be higher even when the

approved base rates stay the same.

The largest factor is often the amount of electricity used.

So most of the bill is tied to kilowatt hour usage.

And so when a home uses more electricity,
the usage based delivery charge and wholesale power charge

increases. Weather can have a major effect.

A member may keep the thermostat at the same setting,
but the air conditioner must run longer on a 100 degree day than

it does on an 85 degree day. And so the member's routine may feel
the same,

but the home is using more electricity to maintain that routine.

David Latona:
Okay. And that makes sense to me.

So the reason of quote, "I did the same thing" does not always
mean my home used the

same amount of electricity.

Nick Smith:
Correct. The rate may be the same and the thermostat setting may
be the same,

but the equipment may have operated for many more hours.

And that's why members should compare their kilowatt hour usage,
not only the ending dollar amount.

David Latona:
So here's another question we hear.

Why is my bill still high in September, October, even November,
when the weather has

already started to cool?

Nick Smith:
So it's important to remember that your bill covers electricity
used during an earlier billing period.

For example, electricity used during a very hot part of August
may appear on a bill received in September.

So if hot weather condition continues into September or October,
the higher electricity use may appear on a bill received in

October or November. That means the weather outside when the bill
arrives may not be the weather that affected the electricity use

shown up on the bill you are receiving.

David Latona:
Okay, that makes sense. And I can see here on the bill,
it tells me what days this particular bill is for.

So the first thing I should check is the service period listed on
my bill.

Nick Smith:
That's totally right. So you want to look at the service dates to
see when the electricity was used.

Then think about the weather and what was happening to your home
during that period.

And so cooler weather today does not change the amount of
electricity your home used during an earlier period

of extreme heat.

David Latona:
Nick, thank you for helping us understand what goes into DEMCO's
rates and the charges members see on their bills.

Nick Smith:
Absolutely. Thanks for having me.

David Latona:
Thanks for tuning in to Co-op Conversations with DEMCO.

If you like what you heard, leave us a review,
like and share the episode with a friend.

Be sure to subscribe so you don't miss an episode.

For Nick Smith, I'm David Latona.

Let's keep the conversation going.