mike: This is tiny improvements.
I'm Mike by Fulco.
Learning is an infinite game.
You can't win or lose,
you can only keep playing.
AS a founder and a builder, you will
regularly find yourself needing to
quickly and efficiently learn new skills.
I graduated from Yukon in 2009, with
Juul engineering degrees, one in computer
science and one in mechanical engineering.
The first field of study was a no-brainer.
Since my first days of high school, I
loved writing code and building software,
studying mechanical engineering
was more of a misguided whimsy.
My dad had a long career
as a mechanical engineer.
And thanks to him.
I developed a love for
classic American cars.
I studied mechanical engineering thinking.
I might want to get a job
in the automotive industry.
Fast-forward 14 years, my God.
And I've never worked a day as a
mechanical engineer until last week.
At craft work, we recently signed
on to do a project that has us
painting the same type of door.
Many, many times the doors
are made of metal and we'll be
painting them with a spray gun.
However, we can't get paint on the latch
mechanism, so we need to mask it off.
We could do this by hand, but
it would take a very long time.
We have hundreds of these doors to paint,
maybe thousands each with the same latch
mechanism that needs to be masked off.
And then unmasked after painting.
Enter 3d printing.
It's the perfect tool for this job.
We can design a simple mask
in CAD and then print it out.
We can print as many as we need
and adjust the design is needed.
The only problem it's been 14 years
since I've done any 3d modeling and
I've never done any 3d printing.
So in the span of about 10 days, I went
from knowing nothing about 3d printing
to having a working prototype of a mask
that we can use to paint these doors.
I
I quickly researched a number of
critical topics, including which
3d printer to buy the latest in 3d
modeling software, how to design for
3d printing and the difference between
various 3d printing materials all while
working on a number of other projects.
And in addition to the complexity of the
actual problem, we're trying to solve.
Painting these doors.
That's not to say that I'm a
particularly gifted engineer
or a brilliant 3d print test.
Instead I think the important
nugget here is something that
I've learned over the years.
Learning is a skill.
And as a founder, you
need to be good at it.
Here's some tips that I've picked up
over the years that have helped me learn
new skills quickly and efficiently.
Number one, learn from the best
resources you have access to.
You don't need to reinvent the wheel.
There are people out there who have
already done what you're trying to do,
and they've probably written about it.
When I was learning about 3d printing,
I found a number of great resources
that helped me get up to speed quickly.
From previous passing interest in 3d
printing, I knew of a few YouTube channels
that ended up being super helpful.
Thanks to my schooling.
I also have a cadre of actual mechanical
engineers who I can rely on for advice.
Shout out to Sean, James, Andy and
Mike y'all are the true Mbps here.
I also consulted my dad who
spent 40 plus years doing CAD
and mechanical engineering.
I read tech reviews and I read the
documentation for the 3d printer.
I ended up buying.
My point is this.
You don't need to go it alone.
Find the best resources you have
access to and learn from them.
Number two learn by doing and act quickly.
I'm a big believer in learning by doing.
I found that I learned best when
I'm working on a project that I care
about and I'm learning skills that
I need to complete that project.
While researching for my project, there
were many opportunities along the way
to take what I was learning and use
it to make progress on my project.
I could have spent more time
researching, but time spent
researching is time spent not building.
Number three, learn from your mistakes.
You're going to make a lot of mistakes.
And everyone you learned from makes
your understanding of the world
around you that much more accurate.
I iterated on the design for our
painting mask five times before I got
it right in 3d printing, that means I'd
spend some time modeling the mask, then
wait a few hours for it to print out.
I then test it and see what
worked and what didn't.
Then I'd go back to the drawing
board and make changes to the design.
And repeat the whole
process from the beginning.
One thing that stuck out to me during
this process is how similar modeling
and printing are to debugging software.
The main difference is that
debugging software is virtually
instant gratification.
You can make a change and see the
results pretty much immediately.
With 3d printing, I'd have to
wait literally hours to see
the results of my changes.
It requires more patience and a deliberate
approach to getting things right.
In the end, it's looking like this
project is going to be a success.
These 3d printed masks will do
the trick for this project and the
skills and techniques I've learned
will be useful for future projects,
whether directly or indirectly.
Perhaps most importantly, this
was another mega deep dive into
something new and I'm better for it.
I'm also deeply grateful to my wife who
saw me disappearing in my office for hours
at a time and put up with me, staring
into the middle distance, as I thought
through the next steps in the process.
She's a Saint.
So TLDR learning is a skill.
And as a founder, you
need to be good at it.
Part of building something new is taking
decisive action quickly and learning
quickly from experts in the field.
Take what you learn.
Turn it into applied
science and iterate quickly.
You'll be amazed at
what you can accomplish.
