Scalability School

Host Brad flies solo to walk through exactly how his team structures Meta creative testing across eight figures a year in ad spend. The episode is a tactical follow-up to a previous episode with Phil, prompted by a viral Twitter thread Brad posted on the same topic.

The core philosophy: stop trying to outthink Meta's algorithm on budget allocation. Instead, run a single CBO campaign per product or offer, treat ad sets as simple folders (not audience segments), and let Meta decide where the money goes. Brad backs this up with real ad account screenshots, shows why a higher-spending campaign with a lower ROAS can actually be healthier than it looks, and closes out with answers to the most common follow-up questions he received from the community.

Key Takeaways

  • Why Meta's algorithm is smarter than you at deciding which of your ads deserves more budget and what that means for how you should structure your campaigns.
  • The single reason you need to stop creating more ad sets and start stacking all your ads in one.
  • Your top-spending ad set has a lower ROAS than the one barely getting any spend, does that mean you're burning money, or is Meta showing you something you're missing?
  • The truth behind what actually happens when you pull it into an ABO to force-test it.
  • How do you build a creative testing system that generates consistent weekly output without needing a huge production budget or team.
  • What "spend is a signal" actually means for your creatives and how you should decide when to turn an ad off (You might actually be turning them off too early)
  • Is splitting your account into a testing campaign and a scaling campaign helping you, or just adding complexity that slows down Meta's learning?
  • How new visitor percentage and frequency metrics should change the way you interpret your campaign's ROAS.
  • The actual risk of running ads to two completely different customer personas inside the same ad set on broad targeting.
  • How to tell when it's time to question your creative quality versus just staying patient with your launch cadence.

This episode of the Scalability School podcast is sponsored by NorthBeam and they just launched Northbeam Incrementality. Northbeam Incrementality gives you easy, automated, self-service incrementality tests, while protecting you from the major mistakes so many people make while running incrementality tests. Your MTA handles the daily tactics, your MMM guides the long-term planning, and Incrementality provides the causal truth. It's a closed loop that allows you to scale what works and cut what doesn't. Right now when you head over to www.northbeam.io/incrementality , they're offering Scalability School listeners 50% off unlimited tests for a year when you join. Just tell them we sent you!

To connect with Andrew Foxwell send an email Andrew@foxwelldigital.com

To connect with Brad Ploch send him a DM at https://x.com/brad_ploch

To connect with Zach Stuck send him a DM at https://x.com/zachmstuck

Learn More about the Foxwell Founders Community at https://foxwellfounders.com/

Learn More about the The Hive Haus Creators Community at http://HiveHausUGC.com

What is Scalability School?

Scalability School is your cheat code for building a more profitable DTC brand or agency.

We break down tactical strategies, real-time wins, and tough lessons from three powerful perspectives: operator, agency, and community. It's not theory—it's what's actually working in the wild. Skip the fluff, steal what works, and scale with confidence.

I've been reading it verbatim, but it's

part of a broader discussion.

But he said more

substantial concept differentiation,

assets with a high degree of visual

conceptual contrast, distinct messages.

This is creative diversity.

What he is talking about is creative

diversity back in 2023.

And I know it feels like it's

been a long time since 2023,

but we've been talking

about creative, not me and we,

but like the

internet, Twitter, e-commerce,

Twitter has been talking

about this for years now.

And I think that's really easy to forget.

The bet that we're making is that meta is

going to be right on the allocation

more often than we are.

And I know there's conversations from

people I respect very heavily

on Twitter and in this space that say,

well, if you have a high hit

rate, then it doesn't matter.

And I just, I'm not

willing to make that bet.

And I'm not just, we're not just throwing

creative unintentionally up

and saying, well, if

it spends, it spends.

But it is freeing in a

way to know that you can,

you can push the volume and know that if

it's not going to deliver,

it just won't deliver.

Now, it doesn't mean be lazy on your ads

and your creative strategy.

But what it does mean

is you can know that

you don't have to try to

force a spend into something.

And that's frustrating.

It can be a very frustrating thing.

I've got one campaign

and I've got two ad sets.

And if you look at the top campaign,

there's one thing that stands out.

It is spent, what is that,

like four times more budget

than the campaign below it.

And it has a ROAS of a whole point lower.

So top campaign, if you're

listening, spent $197,000.

Bottom campaign spent $55,000.

Top campaign performing at a 2.63.

Bottom campaign performing at a 3.4.

Oftentimes people see that and they say,

Fred, what are you doing?

Like why are you not scaling more into

that specific ad set?

Like you're leaving money on the table.

It's performing 50% more

efficient than the other one.

And my answer is, well,

Meta knows something that we don't

about why that can't spend more.

And what we've found is

that there are usually

some signals that give us

context into what that is.

Now, we can't say for sure

because Meta is a

little bit of a black box,

but we can look at some

other metrics to tell us,

well, why is Meta making this decision

that they're making?

And now, let's take a listen to the

Scalability School podcast.

Hey, everybody.

Welcome back to another episode of the

Scalability School podcast.

I am flying solo today to talk about all

things creative

testing in 2026 through Meta.

I'll move my face out of the way and jump

into the presentation in a second.

Just want to say, glad you're here and

excited to go through this.

I know Andrew is off in, I believe,

Lisbon hosting a Foxwell Founders event.

He texted me this morning saying it's

going amazingly well.

And so really excited for him.

And I'm sure Zach is off somewhere in the

world slaying in socks.

So I'm going to hold down

the floor today by myself

and jump into this

creative testing deep dive.

So we did a podcast episode a couple of

weeks back with Phil.

It was fantastic.

I've got it open here.

If you're on YouTube, you can see this.

If you haven't watched it, I would

recommend pausing this,

going back and watching that

because that's kind of the setup to this.

This episode is going to

be a bit more tactical.

I'm actually going to show you

screenshots from ad accounts

and show you how we do the setup

and just be a little bit more specific

with here's actually

exactly how we do this.

Whereas in that episode, we talked a

little bit more and

kind of Phil and I agree,

but we debated a bit more about what the

options are and what

people do for creative testing.

And in a follow-up to that episode, this

episode you're listening

to right now is a follow-up

to a follow-up because I made

a follow-up post on X Twitter.

I don't call it X.

I don't like saying that.

But I made a follow-up post and an

article on Twitter talking

about exactly this and kind

of how we do this.

So I'm taking this, but I'm adding a

little bit more sauce

to the podcast episode.

And I'm going to go into this.

This was both that episode as well as my

article were some of the most popular

episodes that we've,

or things that we've put out that we kind

of have experienced.

And so people are very interested in this

information, it seems.

And so I wanted to

make a follow-up to that.

I will say before we jump in, and then

I'm going to get into this,

and I'm going to rip through and try to

make this the most tactical

second-by-second piece possible.

But I do notice that a lot of people kind

of get really stuck up on

like small tactic things.

I wouldn't say this is small necessarily.

And I know that there are different

opinions about how to do this.

I think the most important thing is not

to be dogmatic about

what the right option is.

And at the same time, you should have an

opinion about how

creative testing should be done,

because then you can focus on the things

that matter as

opposed to being stuck into,

you know, constantly trying to change up

your ad account structure to see if

you're missing out on

what's next for creative testing.

So pick a lane and stick with it and

reevaluate every maybe couple of months

or quarterly or once a year.

This is not something that you probably

need to be changing,

certainly not weekly or even monthly.

So this is how we do meta creative

testing in 2026 across over

eight figures a year in meta ads.

So let's go ahead and

jump into this thing.

So the two camps that people fall in, and

we talked about this

in the previous episode.

Also, if you're not watching this on

YouTube, I'm going to be showing some

visuals and kind of

giving a presentation.

So I would suggest popping over to that.

I'll do my best to explain things that

are on screen, but

just for clarity's sake.

There's two camps that people fall into.

People generally fall into the camps of

either you want to force spend into

creative tests because you invested in

creative and you want to know, is it

going to work or not?

And the other camp is letting meta

allocate budget between the creatives

that you're launching and the existing

ads that you already

have in the ad account.

That's kind of

fundamentally what it boils down to.

Now, there are different ways that that

shows up in the ad account.

And the way that we like to do this is a

single CBO campaign per product or offer.

Right.

And so let's say we're selling pants.

We will set up a single campaign for

those pair of pants.

Let's say we were selling a pant bundle.

We would make a new

campaign for that pant bundle.

Right.

And the reason that we do that is because

there's a different value assigned to

that purchase event.

And so we want to hold those things

separate and give them space to to

breathe and test and set targets specific

to the offers and the product.

And so there are definitely cases for

expanding out from one campaign.

But the way that you can think about this

is if you are a single SKU brand, you can

get away most times with a single

campaign with some caveats.

The other caveats, and there's more, but

one of the more common caveats is if

you're running a cost based bidding.

So whether that's highest volume cost

cap, bid cap or a value based bidding, a

min ROAS or highest value, you can have

two campaigns that are basically the

exact same structure.

The bidding type

descends it being different.

So that's another way that shows up.

So here's an example of what it looks

like in one of our ad accounts.

This is a little bit small, but this is

basically the entirety of the ad account.

Right.

It's a single CBO that spent 400, a

little over 400 grand

in this 30 day stretch.

And it's a, it's a,

it's a single campaign.

Right.

And so it's running on broad targeting.

We are, it's a, it's a

single, single SKU or offer.

Right.

So the offer is the same throughout this,

this entire campaign on

that specific product.

We're not running, you know, 50, you

know, $50 off and, you know, 20% off or

something, you know,

like it's consistent.

We do exclude lifetime customers.

So there's a couple of

ways that we do that.

I'll go from, this

isn't on my screenshot here.

It's not, it's not listed from worst to

best, but I'll kind of explain

them from, from worst to best.

Pixel purchases 180 days.

So that's using Meta's

pixel based audience.

It's fine, but it's not great.

Using Klaviyo lists are also nice because

they can sync up and be automated.

And it's also included

in your Klaviyo plan.

If you have a Klaviyo plan

and then Shopify audiences.

So Shopify audiences and Klaviyo

audiences are similar in that they're

both first party data.

Shopify audiences just tend to be better.

You know, in my experience from an

exclusion perspective.

There's a time and a place to target

repeat customers, but we're not going to

talk about that in this video.

Probably.

I may come back to it at the end.

But for the most part, we are trying to

reach net new people to the brand and net

new customers more, more, more precisely.

I don't know that I'll talk about

retargeting directly in this video, but I

may, I may touch on it a bit.

And so that's, that's how we set that up.

And the bet that we're making, right?

The bet that we're making with this

campaign setup is that Meta is going to

more often, that's an important point,

make a better allocation of the dollars

than, than the human

deciding to run creative tests.

And again, that's, that's the bet that

we're making here, as opposed to running

an ABO setup where we're forcing ad spend

or even a CBO with mid budgets or even

separate campaigns for

separate types of creative.

The bet that we're making is that Meta is

just going to be right more often than we

are, assuming that we give them clear

expectations of what our goals are.

So that's, that's the premise.

So what that means then is that ad sets

are just functionally become folders and

folders is actually even generous in the

way that we set this up, which you'll see

in a second in my screenshot.

But unless you're using ad sets to define

audiences, like maybe you are using

lookalike audiences or you are using

interest-based audiences, or you're

trying to reach a specific cohort or, or

age demographic or even

geographic demo, right?

That's, that, that's a caveat that I

would, I would set

aside for a different point.

But if, if you're not using that, then ad

sets functionally just become folders.

And they're not, although you can dictate

the targeting on the ad set level, if you

just have two broad ad sets that are set

up with the exact same, with the same

exclusions, they

functionally just become folders.

They're just containers for that.

Now, some people will launch new creative

batches into their own ad sets or unique

customer personas into their own ad sets.

The only pushback that, and the reason I

pushed back on the idea of doing that is

because, again, if, assuming you're going

broad, which we would suggest doing,

assuming you're going broad, launching a

new ad set doesn't tell meta to go target

anyone in particular on, on broad.

That is done on the creative level.

So you could have two ads that speak to

completely different customers in the

same ad set, and they will reach the

person that they're supposed to reach

after a little bit of time, right?

Like, I'll take a little bit of time for

meta to pick up and get some conversions

and start to go down the right route.

And a lot of people hesitate, and they

say, well, learning is stored at the ad

set level, and that's how

meta is going to make decisions.

That is not true.

So you can take solace.

I don't know if that's the right word

here, but you can take comfort in the

fact that if you have an ad targeting a

65-plus-year-old female and an

18-year-old dude in the same ad set, they

will reach the person that they are

supposed to reach, especially true if you

have, like, landing pages that are super

dialed for them, which is beyond the

topic of this video.

So ad sets functionally become folders.

And so my face is going to be in the way

of some of this, but that's okay.

So why do we have

multiple ad sets then, right?

So the simplest version of this, if you

were setting this up today from scratch,

you would have a single campaign with a

single ad set, and you would continue to

add ads in there until

you hit the max limit.

Sometimes that's 50 ads.

Sometimes it's 150.

This seems like it differs by ad

accounts, and they slowly have been

rolling this out since the introduction

of ASC back in the day.

But once you hit the max

limit, then you add a new ad set.

And, you know, people, I think people get

a little bit stressed out by this because

what that means is, if you're looking at

my screenshot here, I have five active ad

sets with spend to varying degrees and

different numbers of orders.

The numbers in this case is just the

order in which we launched them.

And so you see that ad set four has the

most ad spend, and that's because the ads

in there are the best.

We don't have a min spend

forcing budget in that direction.

Meta has allocated a budget between these

in the way that you see

them showing up in here.

And so I think that that

is very helpful context.

And so the question that I had before we

committed to doing this, and we've been

running this setup for a little over

three years now, we used to segment the

ad sets by creative batches or by

persona, which I talked about previously.

But I had a conversation with a meta rep

on Twitter and then

separately about does it matter?

Like, do we need to be splitting creative

by these different themes, especially if

we're just running broad targeting?

And they said, no, these are just

functioning folders.

And so what I want to do is show you that

this is from 2023, and it hasn't changed

since then because I had a conversation

more recently with our direct meta rep.

And so this tweet from Yoni, who I

believe is still a meta, he said, more

substantial concept differentiation is

one of the ways to get this.

I'm not reading it verbatim, but it's

part of a broader discussion.

But he said, more substantial concept

differentiation, assets with a high

degree of visual conceptual

contrast, distinct messages.

This is creative diversity.

What he is talking about is creative

diversity back in 2023.

And I know it feels like it's been a long

time since 2023, but we've been talking

about creative, not me and we, but like

the internet, Twitter, e-com Twitter has

been talking about this for years now.

And I think it's really easy to forget.

And I asked the follow up.

I said, so different messages to

different people causes no issues with

the delivery of the ad set, even if those

people are widely different demos.

So what I'm asking is, can I put my two

different ads speaking to two different

people in the same ad set?

And he said, yes, that's the point.

Fuel the system with more ad variety to

reach a broader and more diverse audience

of prospects with a

propensity to convert.

Give the platform more flexibility to

decide where the next best dollar is

spent across a wider range of ads.

Right.

And so we lean into that.

And that's how we decided

to set up the ad accounts.

Now, there are some

objections that come with this.

And one of the ones that we hear all the

time is if I don't force spend with ABO,

how do I know that my

ads will get a fair shot?

Well, we know is that spend

is signal as a result of this.

And again, as I started the video by

saying, I started this episode by saying

the bet that we're making is not that we

are always it's not even that the meta is

always going to be right.

The bet that we're making is that meta is

going to be right on the

allocation more often than we are.

And I know there's conversations from

people I respect very heavily on Twitter

and in the space that say, well, if you

have a high hit rate,

then it doesn't matter.

And I just I'm not

willing to make that bet.

And I'm not just we're not just throwing

creative unintentionally up and saying,

well, if it spends, it spends.

But it is freeing in a way to know that

you can you can push the push the volume

and know that if it's not going to

deliver, it just won't deliver.

Now, it doesn't mean to be lazy on your

ads and your creative strategy.

But what it does mean is you can know

that you don't have to try

to force spend into something.

And that's frustrating.

It can be a very frustrating thing to

spend a bunch of time on a creative

concept or a bunch of

money on a creative concept.

I again, my two cents

is that it's a sunk.

It's you don't want to fall victim to

sunk cost fallacy and just spend it deep,

spend yourself deeper into the hole

because meta doesn't

believe in the concept.

Because even if you even if meta is right

or even if you're right one time for

every time that meta is right 10 times,

then you could still be in a massive, a

massive hole of creative testing.

And so that's kind of why we lean into

the spend is signal philosophy.

And what's great about that is you can

actually see this

playing out in real time.

So this is a screenshot from Motion.

Motion has this awesome

on their creative reports.

No, no.

Yeah, this is not sponsored by Motion.

But in Motion's creative reports, they

have a little like graph, a line graph

view where you can see how

spend goes and trends over time.

And you can do this in a

bunch of different ways.

You can do this on an ad level.

You can do it on a landing page level.

You can do this on the AI tag

level now, which is amazing.

But I love I love this graph.

I think it's one of the most valuable

graphs that people just don't think about

because spend is signal.

And you can actually see in real time how

meta is making decisions

between all of your different ads.

And so I think Shireen, Shireen Albert

coined the term tornado.

Like she basically said, like, hopefully

I'm phrasing this correctly, but you

don't want to make funnels.

You want to make tornadoes because what

you don't know is at any particular time,

what ad somebody is going to respond to

that's going to get them to convert or is

going to get them interested and at least

down the right path.

So what you want to do, and this is I

think is the real point

of creative diversity,

is try to have ads that speak to all of

your potential customers at all the

different stages of

buying that they might have

and answer all the questions they might

possibly need answered in

order to make a purchase.

And that's both from a creative

perspective, but also from

a landing page perspective,

which is probably time for a different

podcast, because I think landing page

diversity is widely slept on.

And I think that's going to be one of the

one of the key themes for the back half

of this year that people

will finally catch on to,

is that you might have you might have an

ad that is very top of funnel that runs

to, you know, maybe a PDP.

But maybe you have one that runs to a

quiz page, and that's actually driving

more net new traffic to the website.

It lowers your cost per 1000 reach, which

I know is a big topic of discussion.

But then you have a bunch of images that

talk about HSA or promos or

all of these different pieces,

which we would consider, right, more

bottom of funnel messaging.

But who is to say that, you know, you

know exactly what the customer needs to

see at this moment in

time in order to convert.

And so the point is, and the way that we

think about setting up ad accounts more

and more is give meta all of the

messaging and all the resources.

Right. And I think this is why you see

with Andromeda and their AI usage.

They are trying to push towards letting

you let them run more AI features because

they are trying to say,

we actually know better than you to a

degree that you don't

even understand yet.

And that's why we want to customize this.

Now, is it there to be determined?

And it's hard to say, but more and more

we're thinking about how do we just like

set up at the ad

accounts to give it all the ads,

give it a give it a governor with cost

controls and our goals, which is the way

that we prefer to do things.

And just give meta the ecosystem of ads

that somebody might need to see at

varying points of the purchase journey

and let them figure it out.

And you can see that very clearly.

Right. We've had ads that pop off really

quickly and then fall off.

Right. And this did really well for a

short moment of time, but then it kind of

fell by the wayside.

But it still makes up a

decent chunk of spend.

And so that's a little bit.

I'm kind of going

overkill on my on the this graph.

But I just think spend velocity is is a

is a really important

signal to lean into.

Usually when winners hit, they hit fast.

Now, there can be times where

seasonality, you know, you've had an ad

live for months and all of a sudden

something happens

seasonally and it shifts.

And all of a sudden that

becomes a winning ad again.

Spend velocity in the short term is

something that we pay a lot of attention

to because spend is signal.

OK, friends, quick break.

This episode of Scalability School is

brought to you by North Beam

Incrementality, which

honestly is so awesome.

Let me just tell you

a little bit about it.

If you're a marketer, you probably agree.

Incrementality testing is broken.

It's insane.

You got to do all this crazy stuff.

But with North Beam, you

do it right in the platform.

It builds tests using your own MTA data,

launches them directly in the ad platform

and automatically monitors them

throughout the test.

And if something threatens validity,

you're alerted to it within North Beam.

Before it ruins the results.

The really nice thing is it solves all

these problems you hear about

incrementality testing all the time, like

labor, spreadsheets,

statistical reference.

Designing tests is

normally so slow, right?

And error prone.

So with North Beam Incrementality, it's

automated and accurate and your team is

able to spend with confidence.

Give it a shot with

North Beam Incrementality.

Really, the future of incrementality is

here and North Beam has

figured out a way to make it easy.

OK.

Well, what we don't like to do is turn

off a ton of ads very frequently, right?

Just because an ad is spending today

doesn't mean you need to kill it today.

And just because it doesn't spend it for

the next three days or the next seven

days doesn't mean you need to kill it

over the course of that time.

Now, is there a time where it's worth

going through and cleaning up ads that

are getting no spend?

Sure.

Sure.

I think that that's a fair, fair thing to

say, especially if you're running on, you

know, running up on page limits or

something like that.

If an ad has been live for two to three

weeks, it's spending a

dollar or less than sure.

You know, you can probably feel mostly

confident in turning that off.

But there's just

because it's not spending.

There's not a lot of

downside in leaving it on either.

I think a lot of people get worried that

they have too many active ads and that

meta can't distinguish between them.

And I would just say that we've not ever

really seen that to be the issue.

There are some caveats to this, right?

I've got some concerns of

like when we turn off ads.

If you've got an ad that all of a sudden

it's super clickbaity and your

click-through rate is three times the

average of your ad account,

meta is going to overspend on it because

it has built up an understanding of your

historical action rates,

which is basically if you have a 1%

click-through rate consistently and your

conversion rate is 3%,

all of a sudden you have a 3%

click-through rate, meta still thinks

your conversion rate is going to be 3%,

at least in the short term on that ad.

It's using historicals to kind of make a

bet a little bit about what

will happen in the future.

So over the course of two to three days,

your spammy ad is going to rip on

delivery because meta

still hasn't caught up.

They will catch up.

But if you watch that ad and you

understand that it's very clickbaity,

then totally fine to go

ahead and turn that off.

Okay.

So let's keep going.

So the real system, creative cohorts, and

this is where you can actually find some

rhythm and some cadence to it.

And so we've kind of gone through, okay,

what does the actual ad

account structure look like?

It's single campaign ad sets.

When you max the ad sets out, you add in

more ads and you just keep stacking ad

sets until you find your winners, right?

But it's important to

still look at your batches.

So you can launch them on a weekly basis.

You can launch them

more frequently than that.

I would just make it a goal to launch

something every single week.

And if all you can do for

now is two ads a week, fine.

Just do two ads a week.

But it's important to figure out the

system to get scale in the first place.

And then you can refine

and get better over time.

But creative strategy can really, it

thrives when it has more to work off of.

So if you've got a bunch of cohorts of

weekly launches, right, like you can see

on the screenshot, and this is another,

this is the new creative report, I

believe, from Motion.

It's fantastic.

You can see how much creative was

launched over the course of a week.

You can click the little dropdown.

And you can actually start to see how

much did this batch of

creative get in overtime.

And what you'll see most times is that

new batches aren't

getting a ton of spend.

Every once in a while,

you're going to hit a banger.

And like that is just, that is the nature

of outlier ads is they're outliers.

And it takes a lot to get those.

But you can still stack up

small wins on a weekly basis.

I've seen ad accounts that they have ads

that make up 90% of their spend.

And I've seen ad accounts where they have

ads that make up 10% of their spend.

And nothing is actually over that.

But what you're doing is you

are stacking up the baseline.

If you can just squeeze out $100 a day

per spend across a couple of new ads and

a couple of new ads, you just

continue to stack the volume.

And that's the goal.

Like I said, the goal is accumulation

over time and not fixating on just one

week of performance.

Because sometimes it just takes time for

things to actually pop off and spend.

And you just want to consistently build a

portfolio of winners,

which is what you can see here.

I'm recording this just a couple weeks

after I took this screenshot now.

I was recording this a bit after.

But what you can see is we had a lot of

winners over this creative cohort.

This is ad set number four, like the

screenshot you were seeing earlier.

We have a ton of winners in this ad set.

But you're not always going to hit a

bunch of winners like this.

The goal is across a bunch of weeks, you

are hitting winners

every once in a while.

That just adds some amount of volume and

scale to your ad account.

And if you keep making those bets,

eventually you will crack the one that

can spend 90% of the ad accounts.

You still have a bunch below.

Now, what I wanted to do was provide some

screenshots and some

context to different ad accounts.

So you can see this in real time.

And when we start to deviate from the

single campaign

structure, you can see why.

And I can provide some context as to why.

So in this case, pretty straightforward.

Single campaign spent

$300,000 over the course of 30 days.

Here's a different one.

What you'll notice is there's a couple of

differences in here.

The top campaign is just run on bid cap.

The one below that is a min ROAS bidding.

So the same content in both of those,

just bid cap versus min ROAS.

Then we've got a New Year's, which was a

promo specific campaign.

And then we've got an additional one

below that, which was

a different product.

So the bid cap on top and the bid cap on

bottom were just two different products.

Now, the sourcing, interestingly, is

actually combining the products.

And because they have, they're different

price points, but they operate on a

similar target ROAS,

we could combine those into one min ROAS

campaign and we feel

more confident about that.

But the top and the bottom campaign, two

different products, sourcing combined,

but is running on min ROAS.

We feel comfortable combining them.

And then the New Year's campaign, which

was a promo campaign,

which we also split out

as a separate campaign.

In this case, we've got

three different campaigns.

This is for three different products.

For this one, two different campaigns,

two different products.

This one, three different campaigns,

three different products.

Two campaigns, two

different products, right?

Pretty straightforward on

how it's actually set up.

Now, there are some tools that are

helpful in the process of doing this.

Here's kind of how we

think about creative.

This is just like some

nice stuff at the end.

Again, no proper

affiliation with any of these tools,

just things that we really like that help

with the creative testing stack.

Obviously, you've got Meta

Ads Manager, appreciate it for.

But then we use Ad Managed AI.

There's a ton of great ad

launching tools out there.

There's new ones launching every single

day that everybody's vibe coding.

But we use a tool like Ad Managed AI to

launch all of our ads

because we're constantly launching a ton.

We use Motion for performance review,

cohort tracking, like I showed you.

It's baked in.

And then they have AI tags, right?

So when I was showing the graph over time

of how things spend and trend over time,

that's baked into Motion.

And it's, again, one

of my favorite tools.

So you can see not only how individual

ads are trending over time,

but different types of messaging, right?

We had a client last year, I did a

six-month performance analysis,

halfway through the year.

And what we looked at was, how did

messaging trend by month?

And they sell a product

that can be used year-round,

and they have some

seasonality, but for the most part,

like they do really well year-round.

But every two months, the

top-performing messaging changed.

And so it's really important that we

looked at the AI tags that Motion has.

And you can see when you

talk about how this works for,

I'm going to have to

anonymize this a bit,

but when you talk about how it works for

winter versus how it works in spring

versus how it works in

summer versus how it works,

you know, the messaging

changed substantially.

Now, it was more specific than that,

but there was always a new theme of

something that worked

better every two months.

And if you don't track

that, you don't know that

because seasonality can impact messaging

very easily, as you can imagine.

And therefore, you might have winners

that look like losers all of a sudden

because you're forcing adspend into them,

but it just might not be

right for the time of year.

But wait two months and it could pop off.

So that's why I love

those cohort views for Motion.

Okay, I had a bunch of different

questions that came up as I posted on X

and some of the replies that we got

following the YouTube video

or the previous podcast

that we did with Phil.

And so I kind of chunked up the most

popular questions that I got

and just wanted to address

those here as quickly as I can.

So first was, how are you adjusting

budgets when you launch these?

Well, the good news is that the campaign

is set at what I'm willing

to spend on a daily basis.

And because we run cost controls, it's

usually inflated by 30 to 50%,

which means if we are hitting our budget,

it's because we're hitting our budget,

we're on target, which means

we should open up our budget.

The degree to which you open up your

budget is relative to

how efficient you are.

You know, if you're super efficient,

you're 2x your efficiency goal,

then you can be more aggressive with

100%, 200% increases.

If you're right on your target, then

maybe you want to be a

little bit more cautious

and keep it no more

than 50% of an increase.

And if you're not running on cost

controls, you know, how do

you think about scaling it?

I think you can feel, again, it depends

on the degree to which

you are above your targets.

But if you're above your

targets, 20 to 30% is safe.

But I think you can feel confident

increasing by 50 to 100%

if you are smashing and you're on target.

I personally don't love running lowest

cost or highest volume,

whatever they're calling it these days.

But that's how I would think about budget

adjustments in that case.

Are you running ads to your exclusions

list in a different campaign?

Yes.

So I said I wasn't going

to talk about this earlier,

but there was a question about it.

I got this a few times.

We run specific retention campaigns.

Simply, our retention campaign setup is

we target lifetime customers,

but we exclude people who

are kind of active, right?

Like they have a chance of coming back.

There's like 80% or less

chance that they do come back.

And so we're targeting

basically lapsed people,

people who without seeing an ad would be

unlikely to come back.

Now, if you have solid volume, you know,

if you have hundreds of thousands or

millions of customers,

you can run holdout

tests on that fairly easily

to see if meta is actually incremental

when you target those people.

We ran this recently and we found that

meta was incremental

when doing this for one of our clients

who's got hundreds of

thousands of customers.

They run at like a 5X in platform.

And it was, it came out to be like a 4X

in the meta conversion

of study that we ran.

So it was definitely incremental.

A lot of concerns that people have is

that new ads don't get spent.

So I have a little

bit of a side anecdote.

I actually saw a tweet from, I believe,

I might butcher his last name.

So apologies, Nick, if you hear this,

but Nick Therio, he's on Twitter.

I think he also makes

some great YouTube videos

and reminded me of an

experience that I had

with one of our clients

where we've had multiple clients

who are spending 10 to 20K a day

and they are spending time and attention

on making new creative assets.

And we're also helping them

with creative assets, right?

And we were having issues getting spend

into some new creative assets, right?

We would have winners and it was long.

It's allowed the account to scale,

but we were making so much new creative

and there's obviously tons of batches

that just aren't getting spent.

And so the hesitancy becomes,

well, we're spending all this money

and all this time on this creative.

Like we should try to

force some spend into it.

And so if the ad

didn't get spent in the CBO,

we would put it into an

ABO and force spend into it.

So it was a loser in the CBO

and we put it into the

ABO to give it a chance.

Every single one of them fail.

100% of them.

And this has happened

every time I've done this.

And I would love,

if anybody has had an

opposite experience,

I would love to see that, honestly,

because I think it'd be

very interesting to see.

But my experience has

been when we've met,

meta is right way more often

than I think people give them credit for

when for the people

that have the ABO opinion.

And again, there's plenty of people

who have scaled the ABO.

I'm not saying it doesn't work.

I'm just saying this is my preference

of what I've seen to work well.

A lot of people ask,

do you just keep adding creative

to the latest ad set until it's full?

Yes, very simply.

That answers that.

The one clarification that kept coming up

is your testing campaign

than your scaling campaign.

Yes, we do not split

testing versus scaling

just for quick context on that.

And then we have this,

I've had this thing

come up several times,

which is about having

your top spending ads,

having a lower ROAS and other ads.

And so what I wanted to do

was pull an example

from an account recently

and just kind of talk through this.

So these are on an ad set level,

but it still tells the same story.

And what you can see,

there's a couple of things going on here.

So I've got one campaign

and I've got two ad sets.

And if you look at the top campaign,

there's one thing that stands out.

It is spent, what is that,

like four times more budget

than the campaign below it.

And it has a ROAS of a whole point lower.

So top campaign, if you're listening,

spends $197,000.

Bottom campaign spends $55,000.

Top campaign performing at a 2.63.

Bottom campaign performing at a 3.4.

So oftentimes people see that

and they say,

Brad, what are you doing?

Like, why are you not scaling more

into that specific ad set?

Like you're leaving money on the table.

It's performing,

it's performing 50% more efficient

than the other one.

Oh, and my answer is,

well, Meta knows something that we don't

about why that can't spend more.

And what we've found

is that there are usually some signals

that give us context into what that is.

Now, we can't say for sure

because Meta is a

little bit of a black box,

but we can look at some other metrics

to tell us, well,

why is Meta making this decision

that they're making?

And so things that I

always like to look at,

you can find this in North Beam,

Triple Whale, Google Analytics.

Any tool will give you this insight.

Any one of those analytics tools

will give you this insight.

It's new visitors as a

percentage of traffic

from that campaign.

And so on the campaign number one,

which is the one that

has worse efficiency,

but way more spend,

it has a 61% new visitor percentage.

So out of the people that click the ads

over this time period,

61% of them have never

been to the website before.

40% of them have been

to the website before.

Now that campaign as a whole

is delivering a much

better new visitor percentage,

but this is just one example.

The ad set below that,

the one that is way more efficient

is sending half as many new people

to the website at only 33%.

So that's, you can tell,

kind of what I'm alluding to here

is the top campaign is fueling

the rest of the funnel.

And that starts to become evident

as you look at new visitor percentage.

If you don't have

access to one of those tools

or you're not

comfortable in Google Analytics

since they torched it,

you can look inside of Meta

and there are some signals

that can lead you down this direction.

And so the example that I'm showing

in this screenshot is,

again, top spending campaign

performing less or worse

on an efficiency level,

but the frequency is a 2.59,

whereas the lower spending one,

it has a higher,

even a higher frequency at a 3.64.

So it's a higher frequency

on substantially less spend.

And what you can see also next to that

is the cost per 1,000 accounts reach.

So that's not CPM,

that's reach,

it's CPMR,

which is what people refer to.

It's half.

It is half of what the top campaign is.

And so the top campaign

is just fueling the rest of the funnel.

And that's why we generally try to,

again,

it's one of the other reasons

why we try to not tell Meta

how much they should spend

into specific things across the board,

right?

Specific promo campaigns.

This happens on Black Friday every year.

You know,

people have this debate on,

are my Black Friday assets

going to spend more

than my Evergreen assets?

Well,

if you run them in campaigns

that are on cost controls,

you don't have to make that decision.

You just leave room for them

to spend into it

and Meta will make that allocation.

Now, again,

there are super talented media buyers

who maybe watch CPMR like a hawk.

Like a hawk,

they watch new visitor percentage

like a hawk.

They watch frequency by a hawk,

like a hawk rather.

And they can analyze these decisions.

I just personally think

it's not a great use of time

when Meta can do it very well.

So I think that helps

kind of answer some of that question.

So here's like a simple version recap

of everything.

So if you want to pause and watch this,

long story short,

one CBO campaign per product or offer.

Ad sets are functionally just folders.

Make new ones when you get the limit.

Build the system

for making consistent weekly content

and just focus on getting volume first

and then you can

optimize for quality later

because I think

quality is a bit subjective.

Let Meta allocate the spend.

Don't force it.

And then track your cohorts over time.

If you go weeks and weeks

without hitting any winners,

then it's time to think about quality

a little bit more.

Like what are you missing

in your creative strategy

that is leading you

to launching a bunch of losers?

And let spend dictate that.

But the good news is

as you review those losers,

you can feel a lot better

knowing you haven't just blown

thousands of dollars

in testing creative.

That wasn't going to work.

So if you have any questions

about any of this,

feel free to leave it in the comments.

You can hit me up on Twitter.

You can probably email Andrew.

His email will probably be

somewhere in the description.

Happy to help,

but wanted to show

some more tactical follow-ups

to how we actually do creative testing.

Thanks so much for tuning in this week

and we'll see you next time.

And yeah, sorry I missed beefs.

I don't have any beefs this week.

Just trying to make the world

a better place one CBO at a time.

This episode is brought to you

by Brad's company, Work Marketing.

If you need a D2C marketing agency,

let me tell you,

Homestead is great,

but Work Marketing is also fantastic.

And let me tell you,

you aren't going to find

friendlier people out there

in the e-commerce space.

So we decided to do these little ads

for each other's companies.

So hopefully you find it interesting.

But seriously, great

team at Work Marketing.

Very smart.

Brad and Jordan are incredibly dialed in.

I just gave them a lead.

Already made this brand.

I gave them like,

I don't even know,

double the revenue that they had

the previous month or something.

So, you know,

it's very exciting to

be connected with Brad.

And if you need a great agency,

there's really no one better.

Zach, anything to

comment on Work Marketing?

Yeah, I mean,

if you want an agency

that cares about your business

much more than they care

about their own website,

I just tried to load workmarketing.com

and it was broken.

So they're definitely going to give

more of a shit about your business

than their own.

So I highly recommend Brad

and the team over at work.

They've been incredible.

We've referred a lot of business

over to them as well.

Really, really good

as far as like cracking funnels

and figuring out like

rapid growth for brands.

So I highly recommend these guys.

Yeah, please go check us out on YouTube.

Rack up those views for us.

We'd love to see it.

And then subscribe.

Make sure to subscribe

on YouTube as well.

And I relentlessly refresh

the YouTube comments

because it dictates

my mental health for the day.

So please say something nice

about all of us.

Thank you, everyone.

Thanks for listening.

Honestly.