Protrusive Dental Podcast

🦷 Plaque Friday™ is here!

Get 20% off Protrusive Guidance Ultimate for as long as you stay, plus 7 days free to try it. That’s every masterclass, AskJaz, verifiable CPD on hundreds of podcast episodes, and our new live series Caries, Cracks and Contact Points with Dr Ronit Patel. Use code PF26 at checkout. Ends Monday 30 November, 11:59pm UK.
👉 https://protrusive.co.uk/plaquefriday

Are you struggling to get your resin work looking flawless?
Wondering how to polish your composites so they shine like a pro?
Curious about practical tips you can implement immediately to level up your smile makeovers?
In this episode, Dr. Charles Brandon shares three game-changing secrets for mastering composite resin. From practical techniques you can apply right away to a conceptual tip that will completely transform the way you polish, Charles leaves no stone unturned.
Get ready for an episode packed with actionable advice, insider knowledge, and inspiration from a dentist whose resin work is truly next-level. Whether you’re refining your layering skills or aiming for that perfect finish, this episode is a must-listen.
 https://youtu.be/dBlN_rbHnTI 
Watch PDP259 on YouTube
Protrusive Dental Pearl: Level up your resin veneers with the Perio Bur (code and more info here)— a long diamond bur for the slow-speed 1:1 handpiece that gives unmatched control, crisp shaping, and beautiful texture. If you use only one bur for finishing composite, make it this one.
Check out this video of Perio bur in Action on a Real Resin Veneer Case → protrusive.co.uk/periobur
Key Takeaways
  • The significance of patient communication and understanding their needs is highlighted.
  • Mistakes are seen as learning opportunities that contribute to growth in practice.
  • The role of mentorship in navigating challenges in aesthetic dentistry is discussed.
  • Aesthetic communication is crucial for patient satisfaction.
  • Patients are visually aided, not verbally aided.
  • Effective layering techniques can enhance composite work.
  • Practice on typodont models to build skills.
  • The polish is secondary to proper placement and finishing.
  • Understanding composite materials is key to success.
  • Start with two shades for layering to minimize complexity.
  • Courses should cover the entire process, not just techniques.
  • Self-teaching is a valuable way to improve skills.
  • Investing in oneself is essential for growth in dentistry.
YouTube Highlights:
  • 00:00 Teaser
  • 01:10 Introduction
  • 02:05 Protrusive Dental Pearl – Using a Perio Bur
  • 05:56 Dr. Charles Brandon’s Journey in Dentistry
  • 11:42 Challenges and Reflections in Aesthetic Dentistry
  • 19:08 Perfect Smile Secret #1: Build from the Bottom Up
  • 26:08 Managing Temporaries During a Trial Smile
  • 26:48 Midroll
  • 30:09 Managing Temporaries During a Trial Smile
  • 35:17 Freehand vs. Stent-Based Systems
  • 39:19 Perfect Smile Secret #2: More Than Polish
  • 44:23 Perfect Smile Secret #3: It’s Not the Composite
  • 48:19 Practice and Continuous Learning
  • 53:20 Course Offerings and Final Thoughts
  • 56:00 Outro
Level Up Your Skills
Practice at home with a simple AliExpress setup (~$200) including a 1:5 & 1:1 handpiece plus micromotor.
Take it further with Dr. Charles Brandon’s composite veneer Masterclass and master the full process from design to finish.
If you enjoyed this episode, check out Minimal Preparation Veneers – PDP219.
#PDPMainEpisodes #AdhesiveDentistry #CareerDevelopment
This episode is eligible for 0.75 CE credit via the quiz on Protrusive Guidance. 
This episode meets GDC Outcomes  C.
AGD Subject Code: 780 ESTHETICS/COSMETIC DENTISTRY
Aim: To equip dentists with practical techniques, workflows, and mindset strategies for delivering high-quality aesthetic dentistry using composite veneers, from patient communication and trial smiles to layering, polishing, and continuous skill development.
Dentists will be able to –
  1. Explain the importance of patient communication, trial smiles, and expectation management in aesthetic dentistry.
  2. Demonstrate a stepwise workflow for additive composite veneers, including mock-ups, trial duration, and handling of temporaries.
  3. Apply layering, finishing, and polishing techniques effectively using minimal composite shades to achieve predictable aesthetic outcomes.
Cost:
Access to this CE activity is included with an active Protrusive Guidance membership. Current membership pricing is available at www.protrusive.app.
Cancellation & Refund Policy:
Memberships may be cancelled at any time. Access to CE activities remains active until the end of the current billing cycle. Subscription charges are non-refundable once processed. Full details are available at www.protrusive.app.

What is Protrusive Dental Podcast?

The Forward Thinking Dental Podcast

SEO METADATA

SEO TITLE:
3 Secrets of Stunning Resin Veneers Revealed, with Dr Charles Brandon | PDP259

META DESCRIPTION:
Dr Charles Brandon shares three secrets for stunning composite veneers: a 3-day trial smile, why placement beats polish, and why it's not the composite.

URL SLUG:
3-secrets-of-stunning-resin-veneers

PRIMARY TOPIC:
How to achieve excellent composite resin veneers

SECONDARY SEARCH TOPICS:
- Trial smile mock-ups for composite veneers
- Red flags in cosmetic dentistry patients
- Composite layering for beginners with two shades
- How to finish and polish composite veneers
- Curing composite properly before polishing
- Best composite for resin veneers
- Practising composite on typodonts
- The perio bur for composite finishing

3 SECRETS OF STUNNING RESIN VENEERS REVEALED
THE PROTRUSIVE DENTAL PODCAST, EPISODE PDP259
HOST: DR JAZ GULATI
GUEST: DR CHARLES BRANDON

EPISODE SUMMARY

On this episode of the Protrusive Dental Podcast, Dr Jaz Gulati talks to Dr Charles Brandon, a practice owner known for his composite veneer work, about how he went from wanting to specialise in endodontics to travelling the world to master resin artistry. Charles shares his approach to imposter syndrome, controlled mistakes and obsessive self-reflection, and why "the master has failed more times than the apprentice has tried".

He then reveals three secrets. First, design from the bottom up: understand the patient's goals, watch for red flags, and send them home in a three-day additive trial smile. Second, it's not the polish but everything before it: careful placement, thorough curing and finishing. Third, it's not the composite but how you handle it, so master one system and practise on typodonts. Jaz's Protrusive Dental Pearl is the perio bur for finishing composite.

IN SHORT

Dr Charles Brandon's three secrets for stunning resin veneers are: design from the bottom up and let patients live with a trial smile first; focus on placement, curing and finishing rather than the polish; and master the composite you already have rather than chasing a new one. He encourages dentists to start layering with just two shades and to practise on typodonts.

KEY TAKEAWAYS

- Jaz's pearl: the perio bur is his single favourite bur for finishing composite.
- Charles believes a patient who can't say what they dislike about their smile is a red flag.
- He sends patients home in an additive trial smile for about three days before layering.
- He never touches enamel for a try-in; reductive cases need consent and a reductive wax-up first.
- When starting out with layering, he recommends using just two shades: an enamel and a dentine.
- Secret two: the polish depends on careful placement, thorough curing and finishing first.
- Secret three: master the composite you already have, rather than switching products.
- Practise new techniques on typodonts before doing them in a patient's mouth.

QUESTIONS ANSWERED IN THIS EPISODE

1. What are the red flags in cosmetic smile patients?
2. How does a three-day trial smile work?
3. What if a trial smile tooth comes loose?
4. Why don't single-tooth shade trials work?
5. How many composite shades should a beginner use?
6. Why won't my composite polish properly?
7. Which composite is best for resin veneers?
8. How can I practise composite layering safely?

IN THIS EPISODE

1. Introduction: three secrets of stunning resin veneers
2. Protrusive Dental Pearl: the perio bur
3. Meet Dr Charles Brandon
4. From endo ambitions to resin artistry
5. Taking massive action, and overcoming imposter syndrome
6. Looking the patient in the eye, and why the money will come
7. Secret one: design from the bottom up, and spotting red flags
8. The three-day trial smile
9. Grind hard, and why single-tooth shade trials don't work
10. Replicating the try-in, and starting with just two shades
11. Secret two: it's not the polish, it's everything before it
12. Secret three: it's not the composite
13. Practise on typodonts, not your patients
14. Charles's courses, and outro

CHAPTER 1: INTRODUCTION: THREE SECRETS OF STUNNING RESIN VENEERS

JAZ:
In this episode, Protruserati, you're going to learn three brilliant tips. The first and third are very practical: things you can do right away to level up your resin game and improve the impact you're able to have on your patients' smiles. The second tip is a conceptual one, and knowing and understanding it is going to completely change the way you place your composites, or more specifically, how you polish them.

Hello, Protruserati. I'm Jaz Gulati, and welcome back to your favourite dental podcast. We're in for an absolute treat. We have Dr Charles Brandon today. This kid is a superstar. His resin work is phenomenal, and I'm so proud to see his progress over the years. What he shares on social media is just stunning.

And I tell you what, he doesn't hold anything back. He gives all his secrets away. While there are a million tips he could share, he gives away these three secrets, which are just brilliant.

CHAPTER 2: PROTRUSIVE DENTAL PEARL: THE PERIO BUR

JAZ:
Every PDP episode, we give you a Protrusive Dental Pearl. I'm pretty sure I've given you this pearl before over the years, but it's so damn good, especially if you're doing resin veneers. The tip is a bur, and it's just so good.

I'm pretty sure it was the Style Italiano guys who found how good it can be in resin cases. It's called the perio bur. It's a long diamond bur that fits in the slow handpiece, the 1:1 contra-angle, and that gives you so much control. It's brilliant for shaping and brilliant for adding texture.

It's one of the burs we love to show on our course, Unchippable. Honestly, wherever you are in the world, you can get hold of this bur, and it's going to dramatically lift your resin game. In this episode, Charlie talks about all the different burs he uses, and he probably uses the perio bur as well.

But if there was just one bur I could have for finishing my composite, this one would be it. In the UK, I get mine from Crown Dental Burs, but you can get it from wherever. I'll put the code of the bur in the show notes, and you can contact your local supplier to get it. If you want to see a video of this bur in action on a real resin veneer case,

head over to protrusive.co.uk/periobur, all one word. That's P-E-R-I-O-B-U-R, so /periobur. If you type in your email address, we'll email you the link to the video. In it, Dr Mahmoud Ibrahim shows you exactly how to use it, and you'll see and appreciate the difference it can make. It can really lift an average composite to a phenomenal composite.

So it's kind of showing off the bur, but it's also a tutorial on how to get the best out of the perio bur. Once again, that's protrusive.co.uk/periobur. And for those on Protrusive Guidance, we'll post it in the feed for you to see as well. Let's now join the main interview. You're going to love it so much. I'll catch you in the outro.

CHAPTER 3: MEET DR CHARLES BRANDON

JAZ:
Dr Charles Brandon, welcome to the Protrusive Dental Podcast. It's so nice to have you. I've been watching your wonderful work, your growth and your journey from afar. It's so great to have someone of your calibre, and also someone whose audio-visual setup is actually better than mine. You told me you're a gamer, and boy, do you look ready to beat me. I don't know what the kids are playing nowadays, man.

DR CHARLES BRANDON:
You'd be disappointed if you heard what I was playing, but I'm very, very glad to be here, Jaz. I've known about what you do for a long time. I've always admired your love of education in dentistry, and you're someone I learned from earlier in my career, when I was first getting started with splints and occlusion.

I've always valued the way you break down complicated topics into such understandable things. Even four or five years ago, when I was much more junior than I am now, I was approaching you to go on those courses. So it's lovely to be here.

JAZ:
I always love interviewing members of the community, the Protruserati. And guys, if you haven't seen Charlie's work, it's the pinnacle of excellence, the micro-detail stuff.

I know you recently got a scope as well, so now I see you on social media on the scope, magnifying 20 times the tip you're going to put into that little crevice in the corner of an incisor.

DR CHARLES BRANDON:
It's a bit of a monster. One of the things I've always looked at in dentistry is: what's my bottleneck? What's actually stopping me from getting better? I reached a point where 10 times just wasn't enough for me. The scope actually goes up to 45 times, which is wild. You can't even see the corner of an incisor at that point, and my hands are nowhere near steady enough to work at 45 times magnification yet. But now I can see. So hopefully in future it'll get even better.

CHAPTER 4: FROM ENDO AMBITIONS TO RESIN ARTISTRY

JAZ:
Amazing. Tell us about your journey. We always love to learn about someone's journey and how they niched in. My perception, Charles, is that you've niched into aesthetic dentistry, and your passion lies with resin artistry.

But I don't know. I assume you're a practice owner, and I know you're a family man. Just give us a flavour of you, mate, and your journey to where you are.

DR CHARLES BRANDON:
I'm a simple man. I decided I wanted to do dentistry, and whatever I do, I want to be the best at it. That's always been my goal. I'm very driven, and very much of the mentality that if I'm going to do something, I want to give it 100%, 110%, the whole way through.

I started as just a normal graduate dentist. In fact, believe it or not, I originally wanted to specialise in endodontics.

JAZ:
You still ended up getting the scope, I guess.

DR CHARLES BRANDON:
Yeah, I still got the scope, so Zeiss were happy with me. I went to the Eastman and met Gulabivala, who was the director of the endo programme when I graduated in 2016. He basically said, "What are you doing here? You've not done any dentistry. You have no idea that you want to do endodontics.

"You just think you want to do endodontics. Go away and do two years of practice, and if you can still say you want to do endo, I'll give you a place on this course." And of course-

JAZ:
You have to respect that advice so much, don't you? Massive kudos to Mr Gulabivala for saying that, because as an institution, they're getting money from you. They could have just thought, "Okay, we've ticked off another delegate." I love that advice.

DR CHARLES BRANDON:
Yeah, it was a milestone in my career. Funnily enough, at the time I was thinking, "Who does this guy think he is? I know I want to do root canals. What's he talking about?" And years later, I thought, he had me right from the get-go. He knew what I was about. So I went into dentistry, and the first great love I had was bonding. And not composite bonding, just bonding. I enjoyed adhesive dentistry.

I actually started with basic composites in the back of the mouth. Whenever I mentor people, I always say, "Look, learn resin in the back, then bring it to the front where it matters, and your errors won't be a problem." If you can get the fundamentals of handling resin down before you do it in the aesthetic zone, you'll be under a lot less stress.

Funnily enough, I do a bit of everything. I do implantology. I place full arches. I do my perio plastics. I do ceramic veneers. I do a lot of ortho. I really like dentistry. The biggest challenge I've had in recent years is narrowing down my practice, because I've got to a point where I'm now known for one thing and I'm having to start saying no to people, which I don't like.

As young dentists, we all go through a period of, "Oh God, I just want to get treatment in so that I can be doing it." I'm now in a different part of my career, where I'm finding that if I say yes to everyone, I don't have enough time to do things well, and with the amount of time and energy I dedicate to each case, it's becoming counterproductive to having a family.

I bought two surgeries in a partnership in 2020. The reason I went solo is that, although I really enjoyed my associate role, I wanted to buy stuff. I wanted to branch out, and I wanted to really funnel the right kind of patients into my chair. I realised that as an associate, although I felt very privileged at the practice I worked at, it was never going to be me getting the best patients.

It was never going to be me getting the best equipment when I wanted it. I'd have to justify a purchase. So it got to a point where I thought, as good as this is, I want to be a diva, and I'm proud of it. So I bought my own surgery. I fell in love with composite bonding in about 2020, and that's when my obsessive determination to be the best at it started. My journey to learn composite has taken me all around the world.

I found the education in the United Kingdom was very good for intermediate-level composite veneers, but the true masters I found were Russian, Brazilian and Spanish. So I travelled to Brazil to learn under a great guy called Júlio Rodrigues in Belo Horizonte for a week or two, about a year and a half ago.

I didn't really care where I had to go. I just wanted whatever was the best. Ever since then, I've become known for my composite and ceramic veneers, but more the composite side. The reason I've fallen in love with composite so much is that I'm a bit of a control freak, and every single stage has to be perfect.

If I'm working with a ceramist... my ceramist is great. I work one-to-one with her, and I think she's amazing. But there's room for error. When you're the one who understands the patient, who's met them and knows what they're like and what they want, the amount of time it takes to truly communicate that to someone else is ridiculous.

It takes far longer than people think. The dream is eventually to have a surgery with an in-house ceramist, so they follow the patient along the same journey, and I don't have to communicate all that to them, because they've been part of the journey the whole time. That's the goal.

But at the moment, I'm just a nerdy guy who really likes dentistry. I love teeth, I love what I do, and I think we're very lucky to be in the profession we're in.

CHAPTER 5: TAKING MASSIVE ACTION, AND OVERCOMING IMPOSTER SYNDROME

JAZ:
I echo everything there. I just want to bottle you up and spray you over the community, because when we started Protrusive Guidance, our tagline was "the nicest and geekiest community of dentists in the world".

And the first thing you see when you open the app is "Fall in love with dentistry again". So many colleagues are disillusioned. They're not in the right environment and feel they're not able to enjoy their work, which is a massive shame. I've decided the impact I want to have on the world is to create more Charleses, right?

More guys like you, who go to work absolutely giddy and made up, because you get to do the dentistry you want to do. But here's the thing: very few people are willing to do what you did there. It's very difficult for them to take that massive action. I've said so many times on the podcast that you have to take massive action.

Look, people get a nosebleed at the thought of travelling to London for a two-day course, right? And you went and got on a flight to Brazil, with time away from family, for weeks, to really do it. That kind of mentality is only found in a select few people. If more people believed in themselves, invested in themselves and actually immersed themselves... that's why you're able to enjoy what you do.

You've given it everything. Whereas a lot of people play small. What do you think about that?

DR CHARLES BRANDON:
When you're starting out, especially, let's take the cosmetic field for example, it's very easy to feel it's an anxiety-inducing field of dentistry to work in, because there are so many different things that can go wrong.

There are so many different problems that can occur, and so many areas where people feel they don't know enough or haven't learned enough. And there's a really weird thing I've found in recent years: cosmetic dentistry doesn't stress me out anymore. When my patients say, "How do I know this is going to be right?

"Are you sure you'll get this right first time?" I can confidently say yes. I know I'm good, because I've done the hard work. But for several years I had to battle against a sort of imposter syndrome: "Wow, should I really be doing this? Am I actually good enough? This is a 24-unit veneer case.

"Who am I to do this?" I remember my first 24-unit veneer case. I'll never forget the patient. She was amazing. One of my best cases to date on my Instagram is the one with the gold foil on the lips. The amount of sleep I lost over that case, and the amount of stress I went through doing it, was astronomical.

And I didn't make that much money from it. But as I did more cases, every time it got a little easier. And the important thing was that I didn't just do the case. I'm an obsessive self-reflector. With my composites, I take a photo of every single stage of what I do. When I get the finished product, I go back and have the end result on one screen, and on the other screen I flick through every single stage of layering to see where I could improve next time:

what worked well and what worked badly. I do the same for my ceramics and my preps. As you start doing more high-end dentistry, it can be challenging and taxing, both emotionally and in terms of time. A lot of people get to that point and go, "Oh God, I'm not really sure I like this.

"I'm not sure I'm cut out for this." It's like running a marathon. The hardest parts don't come towards the end; they come earlier in your career. If you can push through them, and you don't just go through the motions but really give yourself to what you're doing,

if you take every case as a learning experience and do everything to the best of your ability, I feel you start to really progress, not just in clinical skill but as an individual. That imposter syndrome starts to die away. There comes a point when you've done a hundred composite veneer cases and you think, "Well, what's another composite veneer case?"

Now, for every case I do, the first thing I think is, "Right, how can I do that better next time? What wasn't good about it?" The piece of advice I'd probably give younger dentists, and it's one I give all my associates, especially on days when they're not feeling great and they get things wrong, is: the master has failed more times than the apprentice has tried.

I've got it wrong more times than you've even done it. It's only because I've taken those mistakes as opportunities for reflection, learning and growth that I'm where I am now. But you have to be willing to go through that stage and make controlled mistakes with a mentor. Not mistakes like,

"I didn't plan this case, and now my patient has these issues," but mistakes like, "I did my best at every single stage, and there was an unfortunate complication I'd warned my patient about. How can I prevent it next time?" For me, that's probably the most powerful thing that can help people on that journey, and it's certainly what helped bring me to where I am.

CHAPTER 6: LOOKING THE PATIENT IN THE EYE, AND WHY THE MONEY WILL COME

JAZ:
With mistakes in the aesthetic zone, I've made some, and with enough experience, you make some. I think it's about having the resolve and the clarity in what you're trying to do to look the patient in the eye and say, "You know what? We can do this better." The big issue for the dentist at that point is that they're now losing money on the case.

It's taking a lot of time and energy: the energy, time and money it'll take to fix it. It can be fixed, okay? And you get there eventually. If you stop there, then that's it. You've lost, right?

DR CHARLES BRANDON:
But the money will come.

JAZ:
Yes.

DR CHARLES BRANDON:
It might not come on that case. It might not come five cases down the line. But once you've got through that initial stage... and I love what you said about having the balls to look a patient in the eye and say, "I'm not happy." We always think, "Is my patient happy enough? Are they happy enough that they won't say anything and they'll get out the door?"

I remember thinking that with some of my first cases. Now my patient will say, "I'm happy, I love them," and I'll say, "No, there are all these problems I've still got to fix," and they'll say, "I didn't even see those problems." I don't care. It's got my mark on it, so it's got to be right. That will come in time. We pay money to go to university to learn a skill.

We don't make any money during that time, but we don't think of it as a loss. So when we treat cases where we perhaps don't make money, or even pay to do them, as long as we get a really good end result, those cases are no less valuable than your experience at university, if not more valuable, because you've taught yourself.

JAZ:
And if you were going to do a master's programme, three years full-time, or a year full-time, you're not only paying the fees, you're also spending time away from clinic. Every case is a learning experience, and in aesthetic dentistry, especially when you're learning, you're more prone to making mistakes.

And like I said, patients will often be over the moon. But if you work at a level that's really aspirational, and you try to get the patient's permission and blessing, "Look, please let me enhance this and that," not only is the patient going to love you so much, but you learn so much about how little tweaks can become improvements.

The experience you get from that is immeasurable. And of course, you gain so much experience that with each case you keep getting better and better, until you get to a point where you've done so many cases that you thrive.

So with that, now that you've done so many cases... and guys, I'm telling you, if you haven't seen Charles's cases, they're some of the best stuff I've seen, right? This is at the level of Marshall Hanson, right? That's his name, in the States?

DR CHARLES BRANDON:
Marshall Hanson's one of the guys.

JAZ:
High level. We're talking Newton Fahl level. I'm saying this because I've seen the close-ups. You're making these composites look great at maximum zoom, so there's a lot we can learn from you. Today we're going to share three secrets to go from average to excellent in resin veneers.

I find with these episodes that it's impossible to cover everything, from photography to smile analysis to the communication behind it. Does the patient have some sort of body dysmorphia, and how do you weed that out? There's so much you can talk about.

I'm sure you teach all that, but how about we go a bit more technique-focused and talk about three little secrets? Charles, what's the first little secret?

CHAPTER 7: SECRET ONE: DESIGN FROM THE BOTTOM UP, AND SPOTTING RED FLAGS

DR CHARLES BRANDON:
The first secret I'd give to so many people looking to get into composites is that everything in a smile design case should be built from the bottom up. So many people see a case and go, "Right, we need to put some composite on that." The first thing I need to decide when seeing a case is what the patient actually wants. A lot of people come to see me, and as you've said, body image issues are genuinely something you have to factor in.

When a patient comes to you looking to improve their smile, the first thing I want to do is get to know them. Why are they here? What are their goals? Can they give me tangible goals? Because a lot of the time, if someone can't tell you what they don't like, they don't know what they don't like. So how can you improve on that? And I see so many-

JAZ:
So you mean, say they smile, and you ask them what they don't like about their smile, and they say, "I don't know. I'm just not happy. I don't know what I want." Is that a red flag?

DR CHARLES BRANDON:
"I'm unhappy with the way I look" is one of the biggest red flags. If a patient comes in and says, "My smile's too narrow," or "I don't like that my front teeth are much longer than the surrounding teeth," or "I want to improve the colour," any targeted feedback about their smile is a very good sign. Most of the patients I see nowadays are all red flags.

They'd be the worst cases, because they come in already looking great. A dentist messaged me recently and actually said, "You're so lucky to treat people whose teeth are in such good condition to start with." I said, "No, I'm not. It's awful, because their teeth are a nine out of 10.

"They're coming to see me to get to a 10 out of 10." There are diminishing returns on the cosmetic improvement of a smile. It isn't that large. If you go from a four out of 10 to a seven out of 10... I'm not saying it's easy, but if you've got brown, rotten, crooked teeth, there's a relatively straightforward series of things you need to do to make them better.

However, if a patient comes in and smiles at you, and you think they look great, they are... I mean, this patient is sad, and they're not making it up. They're unhappy about the way they look. I've then got to make them better and make that smile their ideal, and they don't even know what their ideal is.

I get patients to send me photo references, not sometimes, all the time. I get my patients to make a mood board. Sometimes patients send me completely unobtainable things. They'll have a narrow maxilla, and their ideal is Julia Roberts. You can't make those two things work. But the design is everything.

My workflow is this: I scan the patient in, I take a full set of photos, intraoral and extraoral, and obviously all the health records. Then in exocad, I design a version of their final teeth. I take a putty stent, and I use cold-cure acrylic to put the patient's new smile in. I actually send them home in it for two or three days and say, "Live with that."

CHAPTER 8: THE THREE-DAY TRIAL SMILE

JAZ:
That's an interesting one: cold-cure acrylic. Usually you hear about bis-acryl, or flowable, but cold-cure acrylic? Where did you learn that? That's a new one for me.

DR CHARLES BRANDON:
It's a technique I actually invented myself. I use Luxatemp, and when I design it in exocad, I make sure it's going to shrink-fit onto all the teeth. I allocate spacer-

JAZ:
That's bis-acryl, though, right? The bis-acryl stuff?

DR CHARLES BRANDON:
Yeah, but it's a cold cure. You just inject it and it sets.

JAZ:
Okay, got it. Understood.

DR CHARLES BRANDON:
Apologies if the naming wasn't right. I put it in the mouth and send them home for two or three days, and I'll only even consider doing the teeth if they come back feeling happy with it. Because it's not just about how they feel in the chair. A lot of people who aren't internally happy with their smile aren't just looking to feel better; they're looking for external validation.

"Do my parents like it? Does my boyfriend or girlfriend like it? Does my partner like it? I'm in a band. What's my fans' response? I'm a designer, I'm going to be on show. What do the people I work with think of this?" I see so many people go wrong because there's no communication:

"Okay, you want some composite? Great, we'll put some composite on your teeth." That's the process, and the patient only gets to see the final product once it's done.

So the design, that bottom-up approach, is fundamental, and never more so than in a layered case. I can't adjust a layered case. Once those layers are in, I maybe have 0.5 of a millimetre, and that's it. That's why I go to such great lengths, because then I know the patient has worn the smile for a few days and come back saying, "I love it."

They haven't got a lisp, the way they speak isn't affected, the way they function isn't affected, and they've taken selfies on their iPhone, not my camera, their phone, and they like the way those look. Because the patient's eyes aren't the only lens they're going to see themselves through.

They'll see themselves through their phone more than in a mirror most of the time. At that point, I'm happy to layer, because I know I'm going to deliver a smile they've already experienced. They also understand the thickness and the changes that are going to happen, and they like them.

JAZ:
One nuance to discuss for younger colleagues is that you can only do this for additive cases, right? Are you in agreement?

DR CHARLES BRANDON:
A hundred per cent.

JAZ:
The danger there, Charles, is that sometimes you might be tempted to think, "Ah, let me just shave this canine labially a bit to allow the mock-up to fit." But at that point, if they come back and don't like it, or they're a patient you don't want to marry, if you know what I mean, you've passed the point of no return.

DR CHARLES BRANDON:
It's incredibly important to say this: I would never touch the enamel for a try-in. And you're completely right. Some patients come in to have reductive dentistry done. Sometimes I do that in composite, sometimes in ceramic. Some patients come to me and say, "Can I have composite veneers done?"

I say, "Yes, but your teeth are too big. The only way I'll be able to do this for you is to make your teeth smaller. If I add any material to your teeth now, they'll look," and I hate to use the term, "slightly horsey. They'll look oversized. You'll feel too teethy." I often use the reference of Jim Carrey in The Mask.

"That's what your teeth will look like." In those cases, before we've even considered starting the process, I get consent for the necessary tooth reduction. What I do in those cases is a targeted reductive wax-up. I make a model in exocad. I don't reduce their teeth in exocad.

I put my design in the ideal place, and you can see all the bits of their teeth protruding through the design. I take a video of this, send it to them and say, "For me to get the results you want, even just for a try-in, these are the reductions I have to do. If you're not willing to consent to that, I can't help you any further."

JAZ:
I love that consent is a key theme there, and how clear your communication is in showing them that. That's fantastic. Any tips? Because dentists will be thinking, "I don't even trust a temporary crown to last a couple of days, and now you're sending them home with a whole smile."

There must be concerns. You must sometimes get patients saying, "Oh, my central has come away." If you've lengthened the tooth and they're trialling the smile, even for just a few days, and it comes away in public, are they instructed to rip the whole thing out at home? How does that work?

DR CHARLES BRANDON:
It's a very valid concern. I have had breakages, but I've never had a breakage within three days. I splint everything together, so you've got additional strength. And these aren't haphazardly designed temporaries. I actually put the models on an articulator in exocad and run all the excursive and protrusive movements.

So they're fully articulated to the occlusion. I then further adjust them in the mouth, and I say to my patients, "If anything comes loose, message me straight away and I'll tell you what to do." I've done probably 50 of these cases, and I've had two teeth break. In both instances, the patient had to cancel appointments or push things back, which I strongly advise against, and I explain that as part of the process. You can't do that.

When I put the designs in the mouth, I specifically create some space palatally to allow a bit of wraparound, so we get as much lock-in of the material as possible. The only two cases I've ever had break were in bruxists, whom I'd warned, and they were premolar teeth, where a tooth had come away.

As I've said, if a single tooth comes loose, take it out. If anything more than that comes loose, let me know and I'll bring you in. But most of the time, I'm fighting to get these temporaries off the teeth before we actually run the smile. The three days is important, though. With anything less,

you're not giving the patient enough time to experience it, and anything longer runs the risk of things coming loose. I've never had a case, not even once, where the whole thing came loose. But you're right, consent is very important. I explain to the patient the nature of what I'm doing, and that it's not glued in. And obviously, if they have any concerns, they have to come back in. It's not optional.

JAZ:
And do you instruct them to be a bit more judicious in what they eat? Don't bite into a baguette, that kind of stuff?

DR CHARLES BRANDON:
Exactly. Nothing harder than cashew nuts. That's the upper limit of crunchiness, and I find that's quite a nice scale for patients to use. I basically say to them, "These teeth are not there for function. They're there for appearance. So please keep to a softer diet, and please don't have any turmeric or cumin."

God, please don't have any turmeric or cumin, because your smile will turn orange. Red wine and coffee I don't tend to find too much of an issue. When they're in the chair, I get them to make excursive and protrusive movements, and I say, "Grind your teeth for me." We check all of this before I let them go, and I make sure everything is where it needs to be before we move them on to the definitives.

CHAPTER 9: GRIND HARD, AND WHY SINGLE-TOOTH SHADE TRIALS DON'T WORK

JAZ:
Amazing. Charles, you probably already do this, because you've done some of my courses, but guys listening: whenever you get someone to grind, make sure they do it hard, okay? There's no point letting them do it softly. You want to see them at their worst.

There's a funny interaction between Peter Dawson and one of my mentors, Michael Melkers. Pete Dawson said to Michael, "Hey, when you do this, make sure they do it hard, because you want to see them at their worst." And Mike said, "You know what, I've never done that."

Pete was a very lovely man, but it was probably the cruellest he's ever been to Mike. He said, "That's because you're a coward. You have to be brave and do it, because if they're going to break something, rather than do it in the chair-"

DR CHARLES BRANDON:
And you need to see it.

JAZ:
...you shallow the angle, or do whatever you need to do in your force management protocol-

DR CHARLES BRANDON:
Yes.

JAZ:
...to make it happen. I really enjoy that one. It's a great trial therapy. And what I also love about this, Charles, is that you haven't even layered yet. So if they're happy with the shape and how it looks now, and the colour... Exactly. When you actually do the layering to their taste, which is the conversation you have with them, it's only going to be better.

That's what I like about it: what they're seeing is probably the worst version, and you're still going to do better than what they've had.

DR CHARLES BRANDON:
An important thing to mention: I've seen a lot of dentists try one colour on this tooth, another colour on that tooth, and another on a third, and say, "Which is your favourite?"

Well, they can't know. That's just one tooth. They can't mentally apply it to their entire mouth. What I do is a 10-tooth additive temporary set of teeth. The reason my case satisfaction is so high, and the reason I never really have patients coming back saying they're unhappy, is that they wear it home.

They experience it. If they come back with any concerns, I say, "Great, we'll do another try-in." When we've got that right, we move to the next stage. It's a level of aesthetic communication that words can't convey, and that's the key thing. Most patients, when it comes to cosmetics, are visually aided, not verbally aided.

So we really need to show them. I used to put a colour on one tooth and a colour on another and say, "Which do you prefer?" They'd pick one, and then they'd say, "Oh, it's a bit too light," or "It's a bit too dark." I'd say, "Well, you chose," and they'd say, "I know, but I couldn't really see it."

Initially I was a bit frustrated, thinking, "What are they talking about? I gave them the chance to choose." But then I realised my process wasn't good enough. If patients come back and still have questions, I've failed to communicate effectively with them.

JAZ:
Massive respect there. The other question I have about this step: one of the concerns in dentistry is when we do something freehand. I'm not saying you necessarily work freehand; you're obviously guided in some way by the try-in. But say you do a try-in and then deliver the case freehand, and the patient says, "Well, I signed up for this, and you gave me this."

That's why a lot of these stent-based systems came about, like injection moulding with stents: to make the process predictable, so the result matches the try-in and is only better. The way you do it, all the design is in exocad, the function is baked in, and I presume you take a putty of it, so the patient knows what they're getting. It'll work within their functional envelope and envelope of parafunction, but it's also something you can enhance. Did I get that right?

CHAPTER 10: REPLICATING THE TRY-IN, AND STARTING WITH JUST TWO SHADES

DR CHARLES BRANDON:
You did. And the truth is, and I'll be honest because I've been through this issue myself, it's a skill issue. If you can't replicate what you've created in CAD and given them as a try-in, your composite needs work, and there's no shame in that. I have multiple associates at my two practices whom I've mentored into composite veneers, and I often say, "Start stented."

"Let's do the design together. You're not at a point in your career where you'll be able to replicate these things, so practise them on typodonts, out of the mouth, when you're not actually working in a patient's mouth. Practise replicating them. When you've had the opportunity to do them and can confidently say, 'I can now replicate that,' then you can bring it in."

With my try-ins... a lot of dentists will look at a half-millimetre gingival zenith discrepancy like it's the end of the world and run. That's my Tuesday. So when I'm delivering these try-ins, I have to know I can do either as well or better. And with the amount of texture and detail I put into my composites, I don't think I could physically represent that in CAD.

That's something I can only generate freehand. So when my patients finish their cases, they always say, "This is even better than I expected," because what they have in mind is the try-in. And I know that if they love the try-in, I've won, because I can then deliver even more than that.

But layering is such a tricky thing to get into. For any young listeners out there: start with two colours, an enamel and a dentine. A lot of the masters of layering use five, six or seven different shades, and it's just not practical. It is when you've been doing it for 10 years, but if you're in your early stages, use an enamel shade and a dentine shade.

Make sure your enamel isn't even that translucent, because then if you mess up your mamelons, it's not the end of the world. A lot of people get drawn into the trap of seeing these layering works and thinking, "I have to replicate exactly that." It's impossible to start with.

Unless you're some kind of superhuman, and I'm sure there are dentists like that out there. But it took me years to get it right. When I started layering, I did a very basic palatal shell of enamel, a body of dentine, and then not even individual mamelons, just three humps on the central incisors,

and then enamel over the surface. It meant there was so little that could go wrong. It was such an easy case to start with, and even if it did go wrong, it wasn't that complicated to fix. And as you begin with two shades, you start to grasp the concept of thickness.

When you lay a mono-shade, thickness doesn't matter; you'll just cut it back. When you start laying multi-shade, you think, "Hang on a second, I haven't left enough room for my enamel." As you get better at two shades, you can start delivering a third, then add a fourth. But don't go from one to five or six.

Don't pressure yourself unnecessarily like that. The design is so important, because if you're going to create something, you need to be able to visualise it. I first sketch it on an iPad and send it to the patient. Do they like it? If they do, great, I'll design it in exocad and send that to the patient.

Do they like it? Great. By the time I'm delivering it in the mouth, I've visualised it in multiple ways on multiple occasions. At that point, it's freehand dentistry in the sense that I'm building it up freehand, but it isn't freehand in the sense that I know exactly what I'm doing at every single position.

You already know how long the tooth is going to be and how thick your incisal edge is going to be. You have the critical data that forms the architecture for your layering. I've eliminated every possible point where I'd need to make a decision as I'm layering.

So when it actually comes to the layering, there's no question; I know what I'm doing. That's why I say start with two shades. Eliminate 90% of the complexity. Just start with composite and enamel, understand it more, and build on that knowledge.

JAZ:
Was that one of the secrets, or are we ready for the second?

DR CHARLES BRANDON:
No, it wasn't, but I am-

JAZ:
We're packing in value, man. Let's go.

CHAPTER 11: SECRET TWO: IT'S NOT THE POLISH, IT'S EVERYTHING BEFORE IT

DR CHARLES BRANDON:
I'm ready to give more secrets. Secret number two: it's not about the polish. It's about everything that comes before the polish. So many dentists message me and say, "How do you get that kind of polish?

"What polishing burs are you using? What polishing paste?" None of that matters if everything before it didn't fall into the correct order. If your layering and composite placement were haphazard and you've left air bubbles in, you're going to ruin your final finish.

How long did you cure your composite for? There's no point polishing wet composite. Did you oxygen-inhibit your final curing layer? And then you start finishing the teeth. My polishing takes about four to six hours to finish a case, and that's after I've placed it.

I'll tell you my polishing process. I start by going over with a red-grit flame bur to make sure I've refined all my contours. I then go in interproximally with some very narrow, ultra-fine IPR strips, normally yellow, to make sure I've got no ledges underneath. I use a very fine flat plastic to actually peel the gum away from the tooth, and then finish the gingival margin one bit at a time.

Then I finish palatally. Then I do the rough shaping facially, all with the same red-grit bur. Once I've got my teeth into the right position, I go in proximally with Sof-Lex discs to finish those areas. Then I start to actually polish the composite, and at that stage, by the way, I use spiral polishers.

There are many great ones. When I say I use X or Y, I've used many, and I'm very careful never to say there's a best product for anything, because to me it's whatever works best in your hands. I see masters out there using entirely different kit to me. There's no bad kit in dentistry nowadays.

Some people like a Porsche, some like a Mercedes, some like a BMW. They're all great cars, but they feel different to different people. The polishing kit I mainly use is by Jota. I use their medium and fine finishing wheels. I start with a medium wheel across everything.

Then they have some green composite finishing points and cones, and I roughly go over the surface with those. Then I go back in and carve in the texture with my red fine flame bur. I refine that with my polishing cones, go over it with the points, and work up to the extra-fine polishing wheel. Every time I'm using silicones, I use water spray where I can to keep the composite cool.

I normally finish with a Lucida felt star and GC DiaPolisher paste, but specifically the lab tub, not the injectable syringe. I don't know why, but I get better performance from the tub.

JAZ:
Wow.

DR CHARLES BRANDON:
None of that would mean anything if I hadn't properly placed and cured my composites. I've had a couple of dentists come to me and say, "I've polished and polished, and it won't go shiny."

I really cure my composites. Don't get me wrong, I place in layers, so I mean an aggregate total. For the final cure on all my composites, I use the Bluephase by Ivoclar on turbo mode, which is five seconds of very strong light, and I do 40 seconds on every tooth, with two lights curing simultaneously.

So I'm taking no risks. In aggregate, I probably cure each tooth for at least three or four minutes, because you've got multiple layers of curing throughout. If your material isn't set, you can't polish it. I see some dentists put a clear stent on, place the composite, set it through the stent, take the stent off and start polishing.

That composite is nowhere near set. The effect of the light on the tooth is directly proportional to the distance of the light from the tooth. The further away you get, the less it's doing. They say, "Well, I still cured for 40 seconds." Yes, but through a centimetre of EXACLEAR, which will also have diffused the light. Those aren't properly cured.

Go back, re-cure them, and then polish. Uncured monomer is the enemy. Funnily enough, when I re-polish cases I placed two or three years ago, the gloss I can get on them is ridiculous. It's better than any case I polish on the day, because when I polish a case two or three years down the line, there isn't a single free resin tag. Any uncured monomer has gone from the composite.

But we can minimise that by curing properly, by oxygen blocking and by placing correctly. So that's my tip number two: it's not the polish, it's the placement. You still need the polish, but without the placement, the polish is irrelevant.

JAZ:
I was once given some good advice, and I forget the exact percentage, that we should spend maybe 30 to 40% of the time actually placing the composite, then a huge majority of the time on finishing: shaping, line angles, that kind of stuff.

Then a tiny bit of polishing at the end, because finishing and polishing are two different things. So what you're saying is that you really labour over the finish, and the polish comes from things like the Jota wheel you use and the paste, plus adding the micro-anatomy. But it's the actual finish, getting that homogeneous, well-cured surface.

DR CHARLES BRANDON:
And none of that anatomy would be there if I weren't putting it into the tooth with burs as well. Just polishing with a spiral wheel gives a flat surface, which is nice and glossy, but it doesn't have life. And again, that's finishing, not polishing.

CHAPTER 12: SECRET THREE: IT'S NOT THE COMPOSITE

JAZ:
Excellent. I'm in total agreement. Now we're ready for secret number three for amazing resin veneers.

DR CHARLES BRANDON:
Secret number three: it's not the composite. So many dentists message me asking, "What composite are you using to get your teeth looking that good?" Seventy per cent of some of my cases are done in Venus Pearl.

People come to me and say, "Oh, it's because I'm not using Tokuyama Estelite." That's a phenomenal composite, but I'm not using the highest-end composite. It's not the composite. It's almost always to do with the way the composite is handled and manipulated by the dentist.

I actually didn't use Venus Pearl for a while, not because I thought it was a bad composite, but because it was quite opaque for me. Then they recently brought out their ART range, and I fell in love with their Bleach and B1 Venus Pearl ART shades.

JAZ:
Because I use Venus Pure, right? So is Venus Pure different from Venus ART?

DR CHARLES BRANDON:
For me, Venus ART is less opaque, the colour is less striking, and it can be blended more effectively with translucent enamel layers. Venus Pure and some of the other Venuses out there are very good, but they're a very solid colour.

I actually like my composite. I use it for my base layer in most cases. Most cases on my Instagram have a base or dentine layer of Venus Pearl ART Bleach, and probably one or two XBLs out there, although I shudder at the thought, but it still sometimes happens. And here's my composite recipe for an average case. By the way, don't try to replicate this until you've done some single- and two-shade composite cases.

I use GC's transparent enamel for the palatal shell: ultra-high transparency, nearly 80%, I'd say. That means you can tone it down as you move forward. If you start opaque, you can't tone up the transparency. I then use either Venus Pearl ART BL or Venus Pearl ART B1 for the body shade.

In most cases, my incisal halo is, funnily enough, the same shade I use for the body: Venus Pearl ART BL or B1. Then I come in with my mamelons, which are still Venus Pearl ART BL or B1. I've only used two composites up to this point.

If I can add length to the tooth, I won't add tints. But if I can't add length and I have to fake the translucency, I'll normally use either Inspiro's Azure shade, or Tokuyama, who actually do a blue and a lavender shade. If you mix those together at a 50:50 ratio, you get a really nice blue around your mamelons.

I then place GC's opalescent modifier into the space I've created between my incisal halo and the mamelons. That gives it a clear but slightly blue characteristic. Otherwise, you just end up with a clear characteristic, which doesn't look that great. I then finish with a little bit of Inspiro Ice, or again, Tokuyama do a white shade.

That's very good. You don't want it to be 100% white. If you haven't got access to those shades, and let's say you have Venus Pearl colour, just put a tiny bit of ochre in your white and mix it until it's 90% white. Then, for my final layer, I'll normally use Gradia's Clear Translucent or White Translucent,

if I want to lift the composites maybe a shade. And that's when I do my finishing and polishing. But the main thing for me is that I don't look at all those composites and think, "This is the best composite." They're just composites that work well in my hands.

I've tried other composites. I've tried most composites, and I never stopped using a composite because I thought, "Man, this stuff is no good." I just thought, "I find this one better." That's my decision process. A lot of dentists are very surprised to find I'm using Venus Pearl in a lot of my cases. They think, "How are you using Venus Pearl?

"Isn't that a basic composite?" Not at all. Kulzer makes a fantastic composite. It's incredibly resilient, and it polishes up beautifully. These are just composites I find work well for me. If your goal is to improve, the worst place to start is by changing your composite. Stick with the composite you're used to.

You understand it, you know how it works, you know its viscosity and its handling properties. Refine your skills with it before even considering another composite.

JAZ:
I think a good piece of advice, and I'd love your take on this, Charles, is this: whatever composite system you have at the moment, use it up before experimenting. Learn everything you can about that system and get good with it. Then, if there's still something left to be desired, buy the Venus ART or the Cosmedent or whatever you want, and learn that one system.

The more you get good at one system... eventually you kiss a lot of frogs before you find your Prince Charming, dabbling with lots of composites until you find the recipe that works in your hands. Don't just copy you, but really give it a good go with whichever system you're using.

CHAPTER 13: PRACTISE ON TYPODONTS, NOT YOUR PATIENTS

DR CHARLES BRANDON:
Go out and buy a typodont model. Stop doing things for the first time in the patient's mouth. I see so many dentists do this. They say, "Well, I tried this new composite on this patient and it went wrong." Why? A typodont isn't expensive. If this matters to you, go and practise.

The number of cases I've done for free on typodont models is astronomical. It's ridiculous. Get a typodont model and practise what you want to do. If you want to break into layering, practise it. That patient will never complain. You'll never have to give them a refund. They don't know the GDC's phone number.

You're always safe practising on a typodont. Start there and build your skills. And if you can't get a composite to polish, take it home, put it on the typodont, cure the hell out of it, and try polishing it. Does something change? Ninety per cent of the time it will. Then take the skills you've learned outside the mouth and transfer them into the mouth.

Another thing I'll live and die by is that the wrong place to learn, at least for your first few cases, is your patient's mouth. You should be learning on models, and you don't need to pay to go on a course to do it. You can just buy a model. I teach, so it's not in my best interest to say that, but I don't like the notion that you can only learn a new skill on a course.

No. Courses are amazing, and there are wonderful teachers out there, but you can teach yourself these things, and sometimes you just need to play with the material to get it right.

JAZ:
I totally agree. And if you do go on a course, the worst thing you can do is wait for that perfect patient to turn up. If you've been on, I don't know, a Bioclear course or a resin veneer course, practise that week, because otherwise you de-skill from everything you learned. Look, I'll show you something. For those listening: AliExpress, 200 bucks. I've got the 1:5 handpiece and the 1:1 handpiece, and you can get your typodont and go away and practise.

So there's no reason to say, "Ah, but if I want to practise, I've got to do it at the surgery, and the surgery isn't free when I want to practise." There's no reason you can't just plug in a micromotor in your garage or a spare room at home. I wouldn't advise using it on a patient,

but for your typodonts, you can totally use it, and it's the best course you could do. I'm happy to put the link to this one. Obviously, don't use it on a patient, but on a model, it's the best cheap way to practise.

DR CHARLES BRANDON:
Jaz Gulati, everybody: not sponsored by AliExpress, we promise. Just to build on that, here's one thing I think is so, so important. Think about it like this.

Take an athlete, or anyone high-performance. The first time they run a race at the Olympics, they'll have practised it an unimaginable number of times behind the scenes that no one knows about, and you only see the refined, finished product. You don't see all my failures.

You see the refined, finished product, but it came from an insurmountable amount of training and time, most of which I didn't get paid for. But think about it like this: if you're learning and not earning money, you're still saving by not going on a course yet. Then go on that course when you've practised loads and started to build up the skills.

You've done a few cases, you've made controlled mistakes, and you now have more patients lined up. Now you're ready to learn. That's the time to go and learn advanced dentistry, because that's when you'll be able to start implementing it in your practice immediately.

CHAPTER 14: CHARLES'S COURSES, AND OUTRO

JAZ:
And again, it helps you get those reps in. I love the three secrets you covered. The first is to do the trial and send them home, so they know what they're going to get and you can suss out the patient. The second is that the polish isn't about the polish; it's about the finishing beforehand. And the third is that it's not about the composite system; it's about you and how you handle it,

being good at one system and actually getting the practice in. This has been amazing, Charlie. I really enjoyed myself. We could chat for days and days. It's a shame we waited this long to have this chat. It's been absolutely brilliant.

Charles, I want you to talk about your courses and what you offer, because in a world where there are so many people we can learn from, there's definitely space for Charles, who's doing wonderful stuff. I'm just so proud of you, mate.

DR CHARLES BRANDON:
You humble me, Jaz, and I'm honestly honoured. I never really thought of myself as a great dentist. I just really enjoyed what I was doing, and over the last few years I started getting recognition for it. Hearing that from you means a lot, so thank you. I'm very, very proud to announce that I've nearly finished developing my course academy, Iridescent Dental, and I'll be announcing the release of my next cohort of Composite Veneer Masterclasses

towards the end of this year, hopefully looking to run the first round in April or May next year. Details will be all over my Instagram. The course is small: only 10 delegates per intake. I strongly believe in small course sizes when teaching layering, because it's such an intricate, one-to-one process.

I can't teach this to a large number of people simultaneously. I need to be able to give as much of me to you as I can. The goal of the course is to show you how I do a five-to-five layering case from start to finish. But here's the key thing: it isn't just focused on the layering.

It also focuses on everything we've spoken about today: the smile design, the photography, all the soft stuff that goes into making the case perfect before you've even touched a tooth. Of course, we'll do a very deep dive into exactly what I do in the hands-on component. But I find that a lot of courses cover really good bites of information, and they do it really well: here's how to crown lengthen. But why do we crown lengthen in a cosmetic case, and when do we apply it to certain types of people?

I really like the idea of releasing something that covers the whole process. I've been holding off on releasing the course because a lot of the material I'm going to teach with is recorded on live patients through my microscope, and I hadn't had that tool until recently. Now I've got it.

I should probably invest in M.2 hard drive stocks, because of the number of them filled with hours of footage. So I'm really excited to be training dentists in the near future. I'm also currently running my one-to-one VIP mentorship programme, where dentists can come down and shadow me through an entire case, as well as the smile design process,

with a follow-up where we can help you run one of your own cases. If anyone's interested, more information is available on my Instagram, and it'll be a pleasure to welcome you onto those courses.

JAZ:
Just remind us of your Instagram tag.

DR CHARLES BRANDON:
Charles M Brandon, all one word. In fact, here's a little-known fact. My logo is too well known now for me to go back and change it, but there's a golden molar in the middle of my logo, and it's meant to be an M. No one realises it's an M. My initials are Charles M Brandon, so Charles M Brandon is the tag on Instagram, but I might drop the M one day. I do always think maybe it's no coincidence that composite bonding and Charles Brandon start with the same letters. So who knows?

JAZ:
Lovely. Charles M Brandon. Remember the name, guys. A superstar in the making. Well, he already is, but you know what I mean. He's making waves. Thank you so much for sharing those gems so selflessly and empowering dentists to get started, even at home. It was great that you reminded me to mention the micromotor and how people can just get started at home.

But for those who want to learn more, I always advise investing in yourself. Remember the massive action Charlie took, which I've taken on several occasions too, with big leaps of faith where you trust your process and yourself and back yourself. In cricket we say "back yourself". You have to back yourself, and you certainly have. Charlie, thank you so much.

DR CHARLES BRANDON:
Jaz, it's been an absolute pleasure.

JAZ:
Well, there we have it, guys. Thank you so much for listening all the way to the end. Wasn't that absolutely spectacular? Don't you just love Charlie, his demeanour, his charisma and his honesty in talking about his past mistakes and how he's evolved?

He's the epitome of someone who takes massive action, like I said at the beginning of our interview. I want everything that's about him: his attitude and his growth mindset. This is the kind of positivity I want to help spread in the world of dentistry. If you enjoyed this episode, please send it to a colleague. Spreading the word really helps Protrusive to grow.

On the theme of growth, I want to thank Team Protrusive, working hard behind the scenes to make all this possible, and of course the Protrusive Guidance members who support us. Without you, none of this would be possible. Thank you so much.

I'll put the links to Charles's courses in the show notes as well, plus the perio bur code and where we can send you a video of how to use it. It's a game changer. And of course, you can gain CPD for this episode if you scroll down on Protrusive Guidance. If you're not on Protrusive Guidance,

make an account. What are you waiting for? You're literally leaving CPD on the table. Our members get so much CPD every year, and quality CPD, because if you've reached the end of this podcast, I'm pretty sure you enjoyed it, right? And if you enjoyed this, you'll love everything we have to offer. Oh, and I almost forgot the AliExpress micromotor.

I'll put a link to that as well. Thank you so much, guys. I'll catch you same time, same place next week. Bye for now.

FREQUENTLY ASKED QUESTIONS

QUESTION:
What are the red flags in cosmetic smile patients?
ANSWER:
Dr Charles Brandon says a patient who simply says they're unhappy with the way they look, but can't name what they dislike about their smile, is one of the biggest red flags. Targeted feedback, such as a smile being too narrow or teeth too long, is a good sign. He also asks patients for mood boards and photo references.

QUESTION:
How does a three-day trial smile work?
ANSWER:
Charles designs the final smile in exocad, then uses a putty stent and Luxatemp to place an additive, splinted trial smile that has been checked in excursions. Patients live with it for two or three days, taking selfies and getting feedback. He only goes ahead with layering once they come back happy with the shape, speech and function.

QUESTION:
What if a trial smile tooth comes loose?
ANSWER:
Charles tells patients to message him straight away. If a single tooth comes loose, they can take it out; if more comes loose, he brings them in. He reports two breakages in about 50 cases, both in bruxists. He advises nothing harder than cashew nuts, and avoiding turmeric and cumin, which can stain the temporaries.

QUESTION:
Why don't single-tooth shade trials work?
ANSWER:
Charles explains that patients can't mentally apply one shade on one tooth to their whole smile, so they often pick a shade and later say it's too light or too dark. A full 10-tooth trial smile lets them actually see and experience the result, because most patients are visually rather than verbally guided when it comes to cosmetics.

QUESTION:
How many composite shades should a beginner use?
ANSWER:
Charles recommends starting with just two shades: an enamel and a dentine. He suggests using an enamel that isn't too translucent, a simple palatal shell, a dentine body with three simple humps instead of detailed mamelons, then enamel over the top. Once you understand thickness with two shades, you can gradually add a third and a fourth.

QUESTION:
Why won't my composite polish properly?
ANSWER:
Charles says the polish depends on everything that comes before it. Air bubbles, haphazard placement, missing oxygen-inhibition control and under-curing will all spoil the finish. He warns that curing through a thick clear stent leaves composite under-cured, and advises re-curing before polishing, because uncured monomer is the enemy of a good gloss.

QUESTION:
Which composite is best for resin veneers?
ANSWER:
Charles says it's not the composite but how it's handled. Much of his work uses Venus Pearl, especially the ART shades, alongside GC, Inspiro and Tokuyama shades, but he stresses these simply work well in his hands. He advises mastering the composite you already know before considering another, rather than switching products to improve.

QUESTION:
How can I practise composite layering safely?
ANSWER:
Charles recommends buying typodont models and practising there before trying new techniques or materials on patients, so mistakes cost nothing. Jaz adds that an inexpensive micromotor with 1:1 and 1:5 handpieces can be used at home for typodont practice only, never on patients, and suggests practising soon after any course so you don't de-skill.

ABOUT THE GUEST

Dr Charles Brandon graduated in 2016 and owns two practices, which he bought in partnership in 2020. He is known for his composite and ceramic veneer work, has trained internationally, including in Brazil, and works under a microscope. He runs courses through his academy, Iridescent Dental, including small-group Composite Veneer Masterclasses and a one-to-one VIP mentorship programme.

- Instagram: @charlesmbrandon

RECOMMENDED NEXT

- Perio bur video tutorial with Dr Mahmoud Ibrahim: protrusive.co.uk/periobur