Confessions of a Shop Owner is hosted by Mike Allen, a third-generation shop owner, perpetual pot-stirrer, and brutally honest opinion sharer. In this weekly podcast, Mike shares his missteps so you don’t have to repeat them. Along the way, he chats with other industry personalities who’ve messed up, too, pulling back the curtain on the realities of running an independent auto repair shop.
But this podcast isn’t just about Mike’s journey. It’s about confronting the divisive and questionable tactics many shop owners and managers use. Mike is here to stir the pot and address the painful truths while offering a way forward. Together, we’ll tackle the frustrations, shake things up, and help create a better future for the auto repair industry.
[Chris Enright] (0:00 - 0:03)
What percentage of technicians do you think are good technicians?
[Bryan Pollock] (0:04 - 0:05)
Five percent, but there's a tech on every corner.
[Chris Enright] (0:05 - 0:28)
Ten percent. Like, are we talking, like, unicorns? There's enough good techs to fill the good shops.
Yeah, like, but are we talking, like, good techs as in, like, what defines a good tech would be my question. Ethical and able to produce one-to-one with an acceptable level of comebacks. I can put...
Okay, I would put that higher than ten percent.
[Bryan Pollock] (0:28 - 0:52)
I would say that's higher than ten percent. I can put, not me, I can put within 30 minutes of my Sanborn shop, I can call five shop owners and put five of those guys to work this instant. But everybody will tell me there's nowhere to go.
Oh, if you're a good tech, there's no good shops. I can put in five other shops. I can put five guys to work at other shops.
There's five good shops that would hire a good tech right now.
[Intro] (0:54 - 1:25)
The following program features a bunch of doofuses talking about the automotive aftermarket. The stuff we or our guests might say do not necessarily reflect the beliefs of our peers, our sponsors, or any other associations we may have. There may be some spicy language in this show, so if you get your feelings hurt easily, you should probably just move along.
So without further ado, here's your host, Mike Allen with Confessions of a Shop Owner, presented by Techmetric. Simply the best software ever made.
[Chris Enright] (1:26 - 1:33)
My house is here. It's like right down the street in the field over here, and then they're checking another field to see if there's enough water. Everybody wants the data centers.
[Bryan Pollock] (1:34 - 1:39)
Nobody, nobody ever drilled and checked for water when they planted 600 acres of corn, but they got to do it when they...
[Chris Enright] (1:39 - 2:06)
Yeah. Oh, that's ridiculous. Are we recording?
Oh, perfect. It would appear that we're recording. Right on.
Is the audio good? Is everybody... This is episode one.
Mike, check two on two. Are you fucking with me right now? Yes.
We're in episode two. Oh my gosh. You motherfucker.
You just lost an entire episode. Hey, it was a warm-up.
[Bryan Pollock] (2:07 - 2:08)
You said... It would not be our 12th.
[Chris Enright] (2:10 - 2:15)
Yeah, anytime we come to an event like this, we fuck up at least one episode.
[Mike Allen] (2:16 - 2:18)
Please, God, let it not be this one.
[Chris Enright] (2:19 - 2:40)
Yeah. Don't mess it up. I've been looking forward to this one.
I'm ready. I'm excited. So, how's things?
Good. Busy. What you been up to?
Anything cool? Yeah, RC cars. I do love your channel, by the way.
It's so much fun. It's one of the few things that I stop and actually watch. It's a blast.
[Bryan Pollock] (2:40 - 2:41)
The little rock crawlers.
[Chris Enright] (2:41 - 3:10)
It's addicting. Yes. So addicting.
And everything is like a real car. So I'm upgrading. I'm doing overdrive and underdrive and the differentials.
I'm upgrading drive shafts and links and everything. So it's a blast. It's so much fun.
My son loves it. He legit drives those every day. Even when I'm not home, he comes home.
I bought him an eight-wheeler. So it's eight by eight. Four-wheel steering or eight-wheel steering.
So front and rear steer. It's got a working winch. It's a blast.
[Bryan Pollock] (3:10 - 3:11)
It's like a model of the Oshkosh.
[Chris Enright] (3:11 - 3:13)
Yeah, the Terranaut. Yeah. Okay, yeah.
[Bryan Pollock] (3:13 - 3:14)
Yeah, it's so much fun.
[Chris Enright] (3:14 - 4:22)
That's cool. Yeah, so he loves that. So he drives that every day.
So what gear are you using to make that content? Because it feels like it's not handheld. Yeah, so some of it is my phone.
And then the other bit is my Metaglasses. So it just depends on what I'm doing as far as if I need to follow. But the one where I'm going up the spiral staircase, that was my phone.
And I'm driving one-handed and using my phone with the other hand. Which was very hard to do for sure. So yeah, that was fun.
Oh man, it's a blast. Now, the new Metaglasses, is it a longer video length now? Because they changed that even for the older ones.
But it's still only three minutes. Yeah. The version 2, I don't know what all they updated on Gen 2.
I still have Gen 1s, but they've been fine for me. So I know I've tried to do some videos with it inside the helmet on track days, racing my daughter just so that we can break down her line choice and that kind of stuff. I can't get a full 10-minute session on it.
And that's kind of frustrating. It's only three. Because they're storing everything, I'm assuming, in the earpieces or whatever.
It's just not enough space.
[Bryan Pollock] (4:22 - 4:31)
They probably don't have a lot of requests for over three. Because it's probably all people doing short-form content, for the most part, are using them, right? It's probably part of it.
[Chris Enright] (4:31 - 4:31)
Yeah, I don't know.
[Bryan Pollock] (4:31 - 4:34)
Probably the primary use is people doing short-form content.
[Chris Enright] (4:35 - 6:20)
Yeah, I mean, that's the bad thing is to keep recording. You have to keep reaching up. And if they're inside your helmet, it's probably hard to even get to.
Because that's normally what I do. Once it ends, I just hit it again. And then I'll film some more.
But sometimes I'm so lazy. I'll just post the first. And I'm like, here's part one.
Instead of just stitching it to one long video, I'm like, here's part one. And then I'm like, here's part two. And then sometimes I never get to actually posting part two or part three.
I just post part one. And then people are like, where's part two? So yeah, I'm not always the best with everything.
Trying to keep track of all of that plus everything else. Now, is that on a specific name channel? Or is it just your personal page?
That one. So the reason it posts on my personal page is because I made a new Instagram. And it automatically links to my personal page.
So I was like, yeah, sure, why not? And so it's called RealRCAdventures, but spelled R-E-E-L, like Instagram Reels. And so it's RealRCAdventures underscore in between each one.
So yeah, that's fun. And how long have you been doing it? A month, maybe.
And what do you get, like 300,000 followers already? No, no, no. I think I'm at like 500.
I think I'm at 500 now. So it was like... 300,000 followers.
I legit told my son, I'm like, all right, we're going to start this page, see if we can grow it and see if we can start getting some free RC cars. I'm like, why not? Like get some free RC stuff, make some videos about it.
And then I was like, and I want to just see if I can build something else again. It's the first time with Luke. Can I do it again?
Or do I actually know what the heck I'm doing? Can I build a second page? So, yeah.
What do you think is the secret sauce for a content creator to actually hit the right tone?
[Bryan Pollock] (6:21 - 6:23)
Please say RageBait. Please say RageBait.
[Chris Enright] (6:24 - 6:30)
Other than, I mean, obviously RageBait can work. Absolutely RageBait can work. So we all talked about this.
[Mike Allen] (6:30 - 6:31)
That's the secret to Lucas and David's success.
[Chris Enright] (6:31 - 8:28)
That's right. Constant RageBait. That's right.
So I don't want to say there is a secret to it. It's like podcasts, right? Like most people that start podcasts, I think they don't even make it to 10 episodes.
It's like six or seven episodes and they're done. Consistency is what you'll hear people say all the time. Then you have all these people who go on and be like, oh, you post it this time.
Post it that time. Use this hashtag. None of that crap matters.
That's a, it's all a load of crap. Viewer duration matters. How long did they watch the video?
Engagement. Did they watch it and engage with it? So did they watch a video and then like it and maybe send it to somebody?
Did they repost it? Did they comment something? So they take all of those metrics.
Actually, I'm following this guy who's like one of the higher up people at Metta for Instagram. And he's like doing a series talking about engagement, like what their rankings are. But it's a lot about the person too.
Like the branding of the person. Like what type of content do they make? You know, because you will see like outliers.
There's always outliers where it's like one random person all of a sudden just starts making content out of nowhere. And next thing you know, it's like 500,000 followers. Overnight, it seems like it's a couple weeks.
It'll just, I don't know, something happens where a couple of their videos hit. And then all of a sudden, people just start getting pushed a lot. Yeah.
And it becomes viral. And, but that's not, that's the outliers. The average person, I mean, they're, I mean, it's been almost four years for me.
It's been a lot of grinding. So, I mean, daily, daily video. Yeah.
Right. Yeah. Sometimes multiple, like two videos a day.
Sometimes I'll do three reels a day. So on my main page, of course, not the RC page. I'm lacking content right now.
I need to go out and do it more. But we got like my kids go to co-op and. Did you bring some with you here?
I mean, we can go. No, Brian actually asked me, but I flew. This is the first year I flew to ASTA.
And I was like, oh man, like I don't have any room to bring them.
[Bryan Pollock] (8:28 - 8:31)
You could have seen if you could go up the down escalator.
[Chris Enright] (8:33 - 8:38)
Yeah. So I didn't bring any, but I would have loved to. I was like, I'm going to see if there's an RC shop around here.
[Mike Allen] (8:38 - 8:40)
There are. We were talking about that yesterday. Yeah.
[Chris Enright] (8:41 - 8:52)
There's one not far from my kid's school. They've got planes out on the. Oh boy.
That's what we were talking about. The planes, man. I haven't, I got to stay away from the planes for now.
It's a problem.
[Bryan Pollock] (8:53 - 8:53)
Yeah. It's addicting.
[Chris Enright] (8:54 - 8:55)
It is very addicting.
[Bryan Pollock] (8:55 - 9:12)
Especially once the kids start, once the kids start to like it. It's an easy excuse. They'd be like, oh, my son's into it.
So I'm going to ignore all my domestic responsibilities all summer. And we're going to go play with airplanes. Because it keeps you kids from watching the idiot box.
[Chris Enright] (9:14 - 9:33)
It's an excuse for a 40 plus year old man to play with toys. Yes, that's exactly right. That's why I go to the go-kart track constantly.
I say that it's because my daughter loves it. But no, it's because I want to be the weird 47 year old dude at the go-kart track full of young people. The tracks are awesome, though.
Those are fun.
[Mike Allen] (9:33 - 9:33)
Yeah.
[Chris Enright] (9:33 - 9:47)
I had such a blast there when we were going there. Whatever, a couple of years ago. So much fun.
Because I don't ever go like, those are the only times I ever go to. We have one, we had one a long time ago, and then it closed down. And then there was like this huge gap.
And then somebody did just make it.
[Bryan Pollock] (9:47 - 9:48)
Was it outdoor or indoor?
[Chris Enright] (9:48 - 9:49)
Indoor. It was indoor?
[Bryan Pollock] (9:49 - 9:49)
Yeah.
[Chris Enright] (9:50 - 10:04)
They weren't like the previous one before this one now. They weren't nearly as fast as the ones at that place that we went to. The new one is, I guess.
They're the faster ones. Yeah, you get the old school ones where they're slow. And it's just, it's terrible.
[Bryan Pollock] (10:04 - 10:05)
Yeah, it's not fun.
[Chris Enright] (10:05 - 10:06)
Unless they go fast.
[Bryan Pollock] (10:06 - 10:16)
We had one near us that was open for a couple years in the Galleria Mall. And it didn't make it. And they had the fast, the electric karts tend to be pretty fast.
[Chris Enright] (10:16 - 10:21)
Yeah, but they can remotely retard the throttle or reduce power, which is infuriating.
[Bryan Pollock] (10:21 - 10:31)
When we had, I don't know, probably like the last year, ASTA was at the Embassy Suites. That pre-party was at a go-kart track with the gas karts. And I was...
[Chris Enright] (10:31 - 10:33)
That was just me and Lucas. We went and did that.
[Bryan Pollock] (10:33 - 10:36)
I was giving them the reach around on the governor. I was reaching around the...
[Chris Enright] (10:37 - 10:42)
You know what you and Lucas did that night? We don't need to...
[Bryan Pollock] (10:42 - 10:53)
No, no, no. The go-kart. The go-kart.
Oh, the go-kart. Definitely the go-kart. Okay, just a little more specific.
Yeah, I was giving the go-kart. You've never reached around a go-kart to the governor? Like us?
[Chris Enright] (10:54 - 10:59)
Okay. I feel like those don't do well because they are expensive. It's not cheap to go to those places.
[Bryan Pollock] (11:01 - 11:07)
There's one... Yeah, you're right. It wasn't exactly a $20 race.
[Chris Enright] (11:08 - 11:14)
No, no. It's like 50-something bucks and I think you get three laps. So one race, three laps by me.
Wow.
[Mike Allen] (11:14 - 11:15)
Yeah, it's expensive.
[Chris Enright] (11:16 - 12:02)
So outside of Charlotte is NASCAR country, right? Oh, yeah. There's Trackhouse Motorsports has a...
It's like a world-class go-kart racing track. It's like a half mile road track. Oh, nice.
With elevation changes, like true braking zones. That's sweet. And they have a rental fleet there that do 50, 55 miles an hour.
But that's a lot of fun. So that's the next company outing I think is we'll go there. That'd be sweet.
So it's like fast enough that... I've been out there once. And come to a curve and my brakes go to the floor.
And it was fast enough to make you like pucker up. Even though you got run off in grass and you got a movable wall and everything else. But it's like, whoop, whoop, whoop, whoop, whoop, whoop, whoop.
[Bryan Pollock] (12:03 - 12:19)
That's sweet. So you suck the seat up into your crack a little bit. Oh, my gosh.
That's a Tommy Markham thing. Every time the Bills are playing, he hits the Buffalo group chat with, I bet you guys can't pick your couch out of your buttholes.
[Chris Enright] (12:19 - 12:23)
Oh, my gosh, Tommy. Have you been in the new stadium?
[Bryan Pollock] (12:24 - 12:29)
No, they've been doing tours. But I've been busy. I haven't been able to...
[Mike Allen] (12:29 - 12:31)
You've been busy flying RC planes, man. Yeah, yeah, yeah.
[Bryan Pollock] (12:31 - 12:47)
No, it's... Doing free diag and other things. I've been busy.
Since the kids went back to school, I've been busy. Lots of free diag. The amount of plane flying since the kids have gone back to school has gone way down.
There's a lot less free time all of a sudden.
[Chris Enright] (12:47 - 12:48)
Yeah, it's a lot of work.
[Bryan Pollock] (12:48 - 12:50)
There's this practice. This one's in this club.
[Chris Enright] (12:50 - 13:00)
I would tell you, Brian, that I believe you do as much shit as you talk about the free diag thing. You don't talk shit about it. You just make jokes about it.
I just make jokes.
[Bryan Pollock] (13:00 - 13:07)
I don't give a... I don't care what you do. Yeah, but you do a fair amount.
I don't care if you pay people to diagnose their vehicles. I don't care.
[Chris Enright] (13:07 - 13:15)
I was going to say, you do a fair amount of free diag yourself, don't you? Do I? I mean, because you're re-diagging all the stuff that your guys didn't do right the first time.
[Bryan Pollock] (13:19 - 13:27)
You gotta re-diag. Hey, this car's got this light on now. Did you try plugging this part back in?
Yeah, that happens.
[Chris Enright] (13:28 - 13:43)
That was always a body shop thing when I was at the dealership. They'd be like, oh, check until I won't unclear, you know, or the seat won't work. And I'm like, click.
Plug the thing in. Scoreboard. The window won't work.
Open the... Take off the door panel. Click.
Yeah.
[Bryan Pollock] (13:43 - 13:58)
Like, hey guys, just pull the door panel and just look, please. Sometimes I'll write it up funny. Like, if it comes from another shop and I have to write a report on it, I don't like making people feel stupid.
So I'll be like, excessive air gap found at connector C203. Excessive air gap.
[Mike Allen] (13:59 - 13:59)
Excessive air gap.
[Bryan Pollock] (14:00 - 14:00)
Oh my gosh.
[Mike Allen] (14:01 - 14:03)
It's a great way to say not plugged in.
[Bryan Pollock] (14:03 - 14:25)
I had won an Equinox one time. They had a body control module they wanted programmed. So I programmed it and both the high beams still didn't work.
And they go, okay, diag it. And I wrote it up. I found found open load at headlight connectors, which was two blown bulbs, right?
Found open load at headlight connectors.
[Mike Allen] (14:25 - 14:26)
Oh my gosh.
[Chris Enright] (14:30 - 15:50)
Speaking of RageBait. Speaking of RageBait. Listen, I'm going to say it right to this camera, Braxton.
Right to this camera. RageBait is good in a way, depending on how it's done, because it creates engagement for people that you want to see the video. We had this conversation.
Was it last night or yesterday or whatever? And a lot of people don't like RageBait and I get why. And I, I get like, if, especially if it's intentional, um, I'm going to wait until this beeping is done, especially if it's like done in a specific way.
It definitely can be bad. Like if it's toxic all the time and whatever else, but like I, we were talking about, I responded to somebody in one of the comments or one of the videos. And I was like, Hey, you should probably watch the whole episode.
And he was like, no, I really respect your content. My content. He was talking to me and he's like, but these guys, blah, blah, blah.
And I'm like, no, no, I know these guys. Like they're, I know what they're talking about. I know what they believe in, except for the free diag and, you know, but they have really good conversations.
I'm like, I really encourage you to listen to the podcast because there are some good information there, but there are some people that just will not, they'll only engage with the RageBait clips, but they'll never listen to a full episode.
[Bryan Pollock] (15:50 - 16:08)
There's a lot of people too, that give you the real, the real feel on what the average level of listening comprehension is out there also, because some people be like, that was out of context. I'm like, no, all the context was there to make the right decision. You just blew it.
You weren't paying attention.
[Chris Enright] (16:09 - 16:45)
Well, I mean, it's like, what were we talking about? I did, I've made content now for almost four years. I've made so many videos talking about owners and how they're not creating good work cultures.
They're not being good leaders. Technicians are underpaid in many situations, horrible working conditions, all this stuff. I've seen it all personally make video after video, holding shop owners to count on me.
You guys need to take the first step, blah, blah, blah. I make one video about technician's quality. And I mean, technicians, the mechanics raked me over the coals.
And I'm like, I have been sticking up for you guys and defending you for four years almost now.
[Bryan Pollock] (16:45 - 16:50)
I made one video saying, hey, you can- I've blindly defended technicians on social media for 10 years.
[Chris Enright] (16:51 - 17:23)
Oh, it's so frustrating. You want good pay. Okay.
You deserve good pay if you're good, but do good work. The amount of guys in the comments that justified poor quality work is insane to me. Insane.
Absolutely not. I don't care. First of all, you agreed to the pay.
That was your choice. You could say no and go somewhere else. Second of all, you cannot justify poor quality work just because you've been mistreated.
That's your decision to stay there. You're an adult. How is that the customer's problem?
Oh, it drives me insane.
[Bryan Pollock] (17:23 - 17:33)
That's why I said, I'm like, at the end of the day, the customers who loses- Because you made a bad deal because you're too stupid to make a good deal. Come on. It's so frustrating.
[Chris Enright] (17:33 - 17:38)
That's garbage. So frustrating to me. And I want to be an advocate more for the candidates.
[Bryan Pollock] (17:40 - 18:06)
Okay. So you get to wear both hats. We get to do multiple things in the shop.
Is it, in most cases, I like to call it, do it nice. Is it that much harder to do it nice? No.
No. No, it's not. No.
It actually- Four minutes. Four minutes to go put that wire back in all the little things it was in. Put it back in the clips?
[Chris Enright] (18:06 - 18:07)
Yeah.
[Bryan Pollock] (18:07 - 18:08)
Put the wire back in the clips.
[Chris Enright] (18:08 - 18:10)
But what breeds that? That's the real question to me.
[Bryan Pollock] (18:10 - 18:19)
Is it just a- So I used to blame it on flat rate. And I can tell you this. I see it in hourly- That's what I was going to say.
[Chris Enright] (18:19 - 18:23)
I do too. I mean, I see it from independent hourly shops all the time as well.
[Bryan Pollock] (18:23 - 18:23)
All the time.
[Chris Enright] (18:24 - 18:26)
So, and that's what I use in all my videos as examples.
[Bryan Pollock] (18:26 - 18:29)
It's a lack of craftsmanship.
[Chris Enright] (18:29 - 19:09)
Yeah. Like a pride in your work. Yeah.
There's not like- Absolutely. That's the generation I came from. My dad, that's all he's about.
Do it right. He always cleaned his tools on the construction site. His truck was the cleanest.
All of his tools were the cleanest. He'd get mad at his guys when they'd take his tools and not put them back clean. And people wonder why my stuff looks so clean and organized.
My dad's been harping me about that my entire life. I'm almost 40. My, yeah.
I mean, legit. My dad was a construction worker his entire life since he was 16 or 18 or something like that. This is how every time his truck was clean all the time.
A construction truck clean, constant.
[Bryan Pollock] (19:09 - 19:29)
That's always my big beef. Whenever you post a picture of your knife, you've got a beautiful toolbox, all organized. I've got a pretty nice toolbox, all organized.
Like, oh, you know what they say about the guy- I know, John. Oh, the guy cares enough to keep his stuff that nice. He's probably doing an okay job.
Second, if he can afford it, he's probably okay at what he does.
[Chris Enright] (19:30 - 19:40)
That's why I have my good buddy at STS Auto Designs make me my magic wand. Because that was like the running joke for the longest time. Because people were like, oh, your tools are too clean.
You don't fix any cars. I'm like, you know what? You're right.
I have my magic wand.
[Bryan Pollock] (19:40 - 20:26)
I just wave it in the car space. I don't want to go inside somebody's car and grab a hold of a greasy power tool and mark their interior up. And then I'm over there with the freaking stuff.
They talk about, like, it takes way less time to get dirt off your tools than it does out of somebody's upholstery. Sometimes faster to clean your tool than it is to clean somebody's upholstery. Yeah.
Why are your tools all dirty? Yep. And like, don't get me wrong.
They're going to get, they're going to get, you know, you're not- Yeah, they get dirty. They're going to get older. Stuff's going to absorb in the plastic.
They're not always going to look great. Yeah. But dude, some of this stuff, I'm like- Oh, I've seen the picture.
You know, if you clean your stuff, like my- My big thing back in the day, before all the electric tools got popular, my airline, like, if somebody worked in my bay and left my airline on the ground, like, I'd start throwing stuff.
[Mike Allen] (20:26 - 20:26)
Oh, yeah.
[Bryan Pollock] (20:26 - 20:45)
Because the airline gets all dirty. And then, back then, you didn't have electric tools. Now you're in the dash, under the dash, you're dragging this thing through the driver's door to the passenger side.
And you're dragging this dirty air hose across the upholstery. I used to take a shop rag, spray brake clean all over it, wipe that sucker down every time. Wipe the air.
I do all sorts of weird stuff.
[Chris Enright] (20:45 - 20:52)
Same thing, like, if you drive it across the front of the car on the paint or whatever, and you see this big old line, you're like- And it'll scratch the clear coat.
[Bryan Pollock] (20:52 - 21:13)
Yeah. Yep. People don't.
There's no craftsmanship. Yeah. There's no craftsmanship.
Stupid things. It sounds dumb. Our shop in Sanborn has railroad tracks right next to it.
So even though our parking lot is, we have a nice concrete apron with blacktop parking lot, there's a lot of dust. If you have the doors open throughout the day, you get a lot of dust in. Twice a day, leaf blower to the bay.
[Chris Enright] (21:13 - 21:13)
That's what I do.
[Bryan Pollock] (21:14 - 21:15)
Probably more than twice.
[Chris Enright] (21:16 - 21:16)
I'm a little weird.
[Bryan Pollock] (21:16 - 21:18)
I don't want the freaking grit. I'm a soft man.
[Chris Enright] (21:19 - 21:29)
What I'm hearing you guys say, Brian Pollack and Chris Enright, is that technicians don't have any pride in their work. They don't care about quality.
[Mike Allen] (21:29 - 21:30)
Not all technicians.
[Chris Enright] (21:30 - 21:57)
Brian and Chris are saying- So here's what's interesting. So there was a guy, what was that video? I'm trying to think.
Somebody did a video talking about how much you- Oh, it was 3Ts doing a video. He's a mobile mechanic, and he was talking about how much he makes running his mobile business. And some guy was like, $3,000, he's like, that's what normal technicians make every week.
Why would I want to go start my own shop? And I'm like, dude, the average mechanic is not making $3,000 a week.
[Bryan Pollock] (21:57 - 22:00)
This is the whole 95-5 rule, right?
[Chris Enright] (22:00 - 22:01)
So that was the thing, and I was like, okay.
[Bryan Pollock] (22:01 - 22:24)
When people get emotional about what we say, I understand that they are, because they're in that top 5% that does care. I get it. I get it.
What you have to do, though, is expand your horizons and realize that you are not the majority, and for the most part, it's worse than we would like to admit out there. That was the thing I said.
[Chris Enright] (22:24 - 23:09)
I was like, well, okay. I'm going to make a video. Tell me how much in the comments you make.
The mass majority of the comments are dudes making $100,000, $150,000, several, and they're making $200,000 or more. And I'm like, okay, that's kind of what I figured what was going to happen, because nobody wants to go online and brag that they're getting paid $40,000 or whatever it is. Yeah, like they're not making hardly any money.
And I'm like, okay, so either everybody, all the mechanics are just lying and saying, yeah, we get screwed, but they're not actually getting screwed, or there's just a massive gap. And the one guy who made the initial comment about, well, why would I want to do that? I'm making $3,000 a week.
He made a good point. He's like, the really good technicians get paid really well, and then there's everybody else. And I was like, okay, I guess that makes sense.
[Bryan Pollock] (23:09 - 23:11)
I've been saying, how long have I been saying that?
[Chris Enright] (23:11 - 23:13)
For a while. It's possible.
[Bryan Pollock] (23:13 - 23:23)
I know some really smart people. I know some guys that are really smart that I would consider in the top 5% of this industry. None of them are complaining about their compensation.
[Chris Enright] (23:24 - 23:38)
Yeah, so I wonder, because I would say, I would defer to, I don't think every mechanic that's underpaid is not a good mechanic, because I talked to some of these. I talked to some real dumb people, and I talked to some really smart people.
[Bryan Pollock] (23:38 - 23:40)
Especially in dealerships, it'll happen.
[Chris Enright] (23:41 - 24:21)
So I think, Chris, what percentage of technicians would you say are really dumb? No, you're not roping me into that one. You're not roping me into that one.
Come on, say it. Ain't going to happen. I want to go fish on.
Yeah, stick that in your pipe and smoke it. Ain't happening. No, but there are some really dumb ones.
I talked to a lot of really smart ones, too. I don't know. Of course, we won't ever know, because we're not in the bay with them.
We don't have proof from their owner. They say they're getting screwed, but they're turning 25 hours a week. Okay, are you really getting screwed?
You're only turning 25 hours a week? You come in, you're mad every day. You hate your job.
[Bryan Pollock] (24:21 - 24:26)
You hate life. You're turning 25 hours a week and making 70 grand. Let's figure this out.
You're doing pretty good.
[Chris Enright] (24:26 - 24:29)
So for me, my thing is...
[Bryan Pollock] (24:29 - 24:30)
That's a real world situation. It is.
[Chris Enright] (24:30 - 25:52)
If you show up, you have a good attitude. You're at least close to 100% efficient. I would say you're worth probably 75 grand in today's market.
Like, you do a good job. You don't have a lot of comebacks. You should probably get paid at least that.
Yeah, change parts, for sure. But you're making the company money more than what it's costing them, for sure. Quite a bit more.
Not everybody's going to go in and turn... I always use my example, because that's the only one I have. I averaged 80 hours.
76 hours at my first dealership and 80 hours a week at my second dealership. So whatever that equates to... And my second dealership, I left, I was making 100 grand.
So 99. I averaged 80. I got paid 25, 15 hours.
I think my W2 showed like 99,900 something, whatever. Had to be annoying. Yeah.
Oh, yeah. I wanted to hit the 100 grand number. I wanted to see that.
But then I quit, of course. But I worked at two different dealerships for like seven plus years. So it took me a long time.
But just like Jeff and I were talking about today, even at that, there's always the argument on flat rate of like, oh, well, if you can't make money on flat rate, then it's your fault. And I'm like, is it really, though? Because when I was doing DIAG at the dealership, it had a purge valve code.
I'm like, purge valve. 80% of the time, you're going to be right. You deal with the 20% later.
[Bryan Pollock] (25:53 - 25:54)
Or more. Or more, honestly.
[Chris Enright] (25:54 - 26:52)
And especially at a dealership level, like if you've got a pattern failure. So you just, it's easy. But in the real world where you actually have to diagnose, it's not the same.
And that's the people never see other people's experience and perspective. It's only theirs. They only can filter it through their own perspective of this is the dealership I work at.
So this is how it worked for me. I know guys who work at Honda dealerships that can't turn hours. And it's not them.
The dealership has a lot of efficiency issues, parts issues, front of house issues, service. Like we had service advisors that couldn't sell worth a crap at all. The one dude was so good at getting stuff covered under warranty.
Nobody ever wanted to do work for him. He would get stuff goodwilled all the time. All the time.
I did a heater core on a 08. Well, this is years ago. So at that time, it was older and it was way out of warranty.
08 Honda Accord with 125,000 miles and they goodwilled it. Goodwilled a heater core. So it went from eight and a half hours, like four hours.
[Bryan Pollock] (26:53 - 26:55)
A heater core should have been like a 336 component, right?
[Chris Enright] (26:56 - 27:27)
He got a goodwill at 125,000 miles. That's how good this guy was at getting stuff goodwill. So yeah, nobody would have been hated.
Oh, nobody liked it. No, he was a great, nice guy. Terrible because he was terrified to actually present stuff and deal with the hard conversations.
But that's like people don't understand because if you have a front service drive of four or five of those guys, everybody in the dealership is getting screwed. Or if you're on teams and your service advisor sucks.
[Bryan Pollock] (27:28 - 27:41)
I never understood. I had somebody try to hire me for something one time and he presented team hours to me, like that was going to be some sort of benefit for me. No.
I said, oh, that's all I needed to know. Don't ever call me again.
[Chris Enright] (27:41 - 27:50)
Yeah, because that's what they tried to do that a couple of times. So if you have a bad week, I don't want to be on team hours. For the slow guy or the bad advisor.
[Bryan Pollock] (27:51 - 28:16)
Like it's great. So let's mental through it as somebody who's a service manager at a shop. What service manager, maybe this will rage bait a dealership service manager that does this.
This is great. What service manager in their right mind thinks they're going to call a top performer and sell them on team hours? Every week, they're going to be in the top end and they're going to get paid less every week.
That was always a thing.
[Chris Enright] (28:16 - 28:20)
They're going to be dragging everyone along with. They're going to be right. Other people are getting paid off.
[Bryan Pollock] (28:20 - 28:30)
I think that's the idea. Like, they think that they're going to sell the team hours to the people who can't turn the hours. You can't sell it to somebody who can do the job.
Like, what are you talking about?
[Chris Enright] (28:30 - 28:42)
Yeah. But I mean, there's places that do that. And there's the teams that they tried to do to us was like, oh, you have to work with this advisor.
Like, it wasn't all team hours, but you would do only this.
[Bryan Pollock] (28:42 - 28:49)
Your team worked this shift with this advisor. These were the technicians. This was the foreman on your team.
[Chris Enright] (28:49 - 29:21)
This is who you work with. And this is everybody. You all collectively will work together.
So you're only doing tickets for him. And I'm like, who's going to work for that one advisor? Like, I'm like, nobody's going to want to be on his team.
Like, that'll never work. You could put me with the hungry guy. That's, you know.
Well, we like in my company, we do team advisor compensation. Every advisor is paid on the entire shop's production, not on individual advisor production. Because I don't want advisors fighting over good customers and dodging bad customers and stealing tickets from each other and that kind of shit.
[Bryan Pollock] (29:22 - 29:24)
You don't want flat rate things happening with your advisors, Mike.
[Chris Enright] (29:25 - 29:35)
So what's the equivalent of stealing tickets from each other in the flat rate world? Is there stealing tickets from technicians in the flat rate world?
[Mike Allen] (29:35 - 29:36)
The second deal.
[Chris Enright] (29:36 - 30:18)
So the first dealership, you got tickets directly from the advisor that I worked at. So the advisor would come back. Who's the advisor going to go to?
Me, the guy that does a timing belt in an hour. Or the guy that does a timing belt in five hours. He's going to come to me every time.
Well, then what would happen is, is the service manager was soft. And so he would bring them all to me. And then you had this guy over here who sat on his phone all day and cried.
And so he would go to the service advisor. And then the service advisor, or I mean, service manager. And the manager would be like, oh, well, here, let's give the squeaky wheel some grease.
And he would cry and things would go back to like what we call normal. Like, this is what the dealership wanted. And I'm like, if you want the timing belts, how about you get them done faster than five hours for one time in your life?
[Bryan Pollock] (30:18 - 30:39)
This is what's stealing the good, the equivalent for the technicians. Okay. You got to paint the picture.
You're working at a big, big dealership. 25 bays, huge new car and used car business. One guy makes sure he's the first person through the door, walks up to the used car desk and takes six tickets before anybody else gets there.
Every single day.
[Chris Enright] (30:39 - 30:51)
That's what I was going to say. The second dealership I worked at, there was a wall and there was a dispatcher. So before the dispatcher would even come in for his schedule, there was a few techs who would work before.
And so you would go up and get all the good stuff.
[Bryan Pollock] (30:51 - 30:58)
Yeah. The 30s, 60s, 90s. Yep.
Oh, yeah. Yep. You get all the good stuff.
Used cars, print money.
[Chris Enright] (31:00 - 31:41)
Is that the compensation plan or is that the business? Because I think flat rate works great if everything else in the business is great. So here's always my pushback about flat rate.
Yes, it can work great and I think it can run well. The thing people never consider is what it does to the tech mentally. People can argue with me this all day long, but I have the experience.
You're always thinking about beating flat rate time. You may think you're doing everything legit and everything right. But when that time comes and it's, oh, I need to put this back correctly and you're struggling for hours or something.
If you need the money, you're not going to do it.
[Bryan Pollock] (31:41 - 31:42)
And then you can't break the mentality.
[Chris Enright] (31:42 - 32:37)
There's a big gravy boat ticket that's the next one in the dispatch line that you've seen. And you've got to get this job done if you're going to get to that. There's always some sort of something.
I'm not saying, I'm not far from perfect for sure, but I was still, my moral compass is pretty strong. So I wasn't doing like shady stuff. But yeah, like if I could shortcut something and yeah, if I had to bend this line out of the way to get something to come out right.
Instead of removing it properly. Bend it back, instead of taking it all the way. 100%, you're bending the line every time to get something out.
I mean, we were doing that with the power steering hose recalls. It was paid us, I forget how much. I was doing them in like 15 minutes or something like that.
And they paid us like 2.8 hours or something. It was crazy. But they wanted you to drop the entire subframe to get the steering rack out.
We figured out a way that you could bend the line, sneak it through and then bend it back when it got in there. And that's how you got it done. And we were stacking them on top of each other and doing them that fast.
[Bryan Pollock] (32:37 - 32:37)
Yeah.
[Chris Enright] (32:38 - 32:40)
That's what it breeds. It breeds that every single time.
[Bryan Pollock] (32:40 - 33:24)
And then once they spend so long doing that, like the two largest quality issues, the two... And it's not huge. It's not like a huge volume of quality issues.
But I'm not kidding you. The two largest... The most time I spend on quality control in my shop is two guys.
Both of those guys, flat rate at their last job. So you don't have anyone in your business that is flat rate. But you feel like some of your quality control concerns that you have in your business are still the byproduct of flat rate.
I got one guy who still thinks he's working flat rate because he worked it so long. It was hard for me to break when I started my shop.
[Chris Enright] (33:25 - 33:27)
It was really hard. Even now I still think efficiency...
[Bryan Pollock] (33:27 - 33:37)
We have on like a whiteboard... We have like do it nice written on a board to remind people like, hey man, we're not going to hound you for hours. Do it nice.
[Chris Enright] (33:37 - 35:17)
We have friends that we all know that have shops that don't have any flat rate. And they have shop full of dudes who are doing 20 to 30 hours a week. So that's the other end of the spectrum.
You have to manage effort or ethics. One or the other, right? Oh, that's why I'm a huge fan.
I think there should be some sort of performance-based bonus somehow. You should be able to work harder and make more money or be better. The really good guys shouldn't be penalized.
And that's always my argument about the guys who say, well, if I got paid salary or something I would never make. I'm like, true, but that's because no one's ever offered you what you make on flat rate in a salary or hourly position. They always offer less.
Every time an owner comes in and is like, oh, well, I offered my guys salary and they wanted to stay flat rate. I'm like, how much did you offer them? You didn't offer them the $150,000 they're making.
You offered them $75,000 salary. So don't tell me they wouldn't take if you offered them. That's the problem.
So one of the things that I say when I'm interviewing technicians is like, I pay technicians how they want to be paid. So if they say they want flat rate, great. If they want hourly, great.
If they want salary, great. If they want a hybrid, that's great. In my company right now, almost everybody's in a hybrid of some sort.
But the more risk that is transferred from me to you, the lower the threshold of minimum performance. If you want $150,000 a year salary, and I believe that you're capable and worth that to make the numbers work, great. But there's going to be a signed document about minimum level of acceptable performance.
[Mike Allen] (35:17 - 35:17)
Absolutely.
[Chris Enright] (35:17 - 36:38)
I promise to give you this many cars per day. And I need you to develop this many billable hours per day. And if you fall short of that, it's going to be a very short leash because your cost is so high.
I mean, clear expectations, right? Like they have to have it. You can't just pay somebody $150,000 and they're giving you 60% efficiency.
It'll never work. I had a dude that was $120,000 salary. And he was a foreman at the shop that he was at.
And he came in and he was tired of babysitting and just wanted to wrench. And for the first six months, he hit, I think, my standard was 45 hours a week of quality. And I never had a quality control issue with him.
He was always doing good quality work. And it was 45, 46, 48, 42, whatever. But his average was 45 or better.
And second six months, it was like 38. And next six months, it was like 32. And while that was happening, no one else in the company had their hours go down.
Everybody else was still plugging along at the same rate. Car count was the same. Service advisor performance was the same.
So it's not existing in a vacuum, right? If car count was down or the advisors were terrible.
[Bryan Pollock] (36:38 - 36:38)
Yeah.
[Chris Enright] (36:40 - 37:14)
So none of the other usual suspects for downturning in performance were there. Right. And I was like, dude, we had this conversation.
I cannot continue to pay you a salary. I'm going to switch you to flat rate with a guarantee. And if you produce 45 hours a week, you will still make the same money.
Yeah. And he quit within two months. And his attitude went to shit immediately, obviously, because anybody gets a pay cut.
Everybody assumes that a pay plan change is a pay cut.
[Mike Allen] (37:14 - 37:15)
Yeah.
[Chris Enright] (37:15 - 37:30)
Because why wouldn't it be? Because that's what the man does. Right.
And in his instance, it was a pay cut because he wasn't producing. Right. Well, and also probably in his defense, that's probably all he ever experienced.
Again, that's another conversation I had.
[Bryan Pollock] (37:30 - 37:52)
I can't. I can't wrap my head around guys that can't get hours turned in the south with a labor multiplier. I can't wrap my head around this.
Yeah, but how well? Are you telling me? Are you telling me you got a bunch of cars that need a bunch of parts put on, they got no rust on them, and you're going to take the book time and multiply it by 1.2 and they can't make 40 some hours?
Is that what you're telling me?
[Chris Enright] (37:53 - 37:55)
So here's my question for you in that situation.
[Bryan Pollock] (37:55 - 37:56)
Is that what you're telling me? How long?
[Chris Enright] (37:56 - 38:09)
Was it a full six months, like the second six months? Was it a full? The first six months were at or above the minimum.
The second six months were at or below. And then like three months after that, it was significantly below.
[Bryan Pollock] (38:09 - 38:09)
You're telling me.
[Chris Enright] (38:10 - 38:38)
And that's when you had the conversation? When the very first week that he didn't hit his time, did anybody say anything to him? No, we reviewed it once.
Okay. And then the second time, I was like, dude, it ain't working. Gotcha.
And he was immediately, like that evening, he was job hunting because everybody in the area, we know each other. Hey, man, you let this guy go? No.
But I'm sure he's looking. He's looking, he applied.
[Bryan Pollock] (38:39 - 38:41)
I have to get my calculator out. I'm that irritated.
[Chris Enright] (38:43 - 38:54)
How about people down south and out west? Every time somebody posts a video of like a hub falling out or something, I'm immediately angry. How easy they come out.
I saw a video the other day.
[Bryan Pollock] (38:54 - 39:03)
You only got to turn 34 hours a week as all data flies to freaking get 40 hours on a 1.2 multiplier. Yeah, but he needed 45.
[Chris Enright] (39:05 - 39:14)
But here's the thing. Most shops are not running multipliers either, sadly. Like I would say the majority of shops are not running multipliers.
[Bryan Pollock] (39:14 - 39:48)
You know what? And that's fine, but I still talk to a lot of people where it's the same story. Yeah, I know they got a 1.2 and then when the car gets over like six or seven years old, they got a 1.5 and the people still ain't turning the hours. Yeah, which is crazy. I'm not turning hours on. You can be a bunch of freaking seven year old cars with a 1.5 multiplier. I'm freaking be 90 hours a week. I'm freaking be counting the Yamahas on the back of my center console. I'd be freaking bitch about not be able to turn hours.
I mean, I even see they'll hang five of them Yamah dogs on the back of a big ass center console. But I didn't follow my 1.5 multiplier. Are you kidding me?
[Chris Enright] (39:48 - 39:56)
Even to this day, I still beat flat rate times, which I don't even like. I'm not like I'm not trying for speed. No, I'm not.
[Bryan Pollock] (39:56 - 39:56)
I don't time.
[Chris Enright] (39:56 - 39:58)
So I don't always had this thing.
[Bryan Pollock] (39:58 - 40:02)
Sometimes, you know, slow is smooth and smooth is fast. Yeah, yeah, for sure.
[Chris Enright] (40:02 - 40:12)
Right? Yeah. Like when I'm doing head gaskets, though, like on the one five, like even those like some people aren't like I'm like that is like one of the most gravy jobs on the planet.
[Bryan Pollock] (40:13 - 40:36)
On a one five, I put I put a timing chain on a one five. A couple of weeks ago, never done one before. Oh, my gosh.
Never done one before. And I was like, OK, and I like had five other things going on and I'm in 50 group chats and I have all these other guys to run. And it was like three and a half hours.
Yeah, and I'm like, and is it like is it like six ish something like that?
[Chris Enright] (40:36 - 40:36)
Yeah.
[Bryan Pollock] (40:36 - 40:46)
Six and a half, maybe in the book. Three and a half hours. Never done one before.
Distracted by multiple things. Yep. I'm like, why can't people not get their hours turned?
[Chris Enright] (40:47 - 40:52)
Now, I will say I am right. You're just Johnny Supertech.
[Bryan Pollock] (40:52 - 40:53)
No, I don't understand.
[Chris Enright] (40:54 - 41:39)
I'm also probably the worst person to to like say that, too, because I work on so many Hondas, too. So like Honda's are the easiest car to work on. There's no doubt in my mind.
They are the easiest. Now, again, as the rolling joke goes, I don't only work on Hondas, even though people say that all the time. Well, Chevy pickups are easy, too.
Yeah, but they make the money. Yeah, but like I stopped taking all Jeeps. I only had like three Jeeps as customers and I was like, I'm sorry, guys.
But Chrysler products break all the time. Well, yeah, it literally stands for just empty every pocket. Yeah, but when my parking lot's full of Hondas, Acuras, Toyotas, Lexus and a Chrysler pickup or something like that, and I have three Jeeps that I work on in my entire customer base, I'm just like, it just doesn't make sense.
[Bryan Pollock] (41:39 - 41:56)
I hate working on them anyway. So what's actually because there's no way there's no way people are going that slow. Something's got to be going on.
But I'm sure a lot of it is. They are going that slow. Somebody else decided what parts to order and then there's not enough parts.
And now the car is waiting. Now we got to push the car out.
[Chris Enright] (41:57 - 42:23)
I think people are just on their phones. Maybe the guy's slow. Maybe the service advisors are taking too long to turn estimates.
Maybe car count isn't good that day. There are multiple factors that play into downturns like that. But when the downturn lasts over months and no one else in the in the same shop is having an equivalent downturn.
Yeah. Then you got to look at the one factor that. Well, it's like anything.
Every situation is going to be.
[Bryan Pollock] (42:23 - 42:24)
How many Yamahas I can put on a Boston.
[Chris Enright] (42:24 - 42:34)
Everything is going to be a little bit different in every situation, of course. Like, yeah, there are some same like pattern failures that you're going to see. But every shop is going to be a little different.
[Bryan Pollock] (42:34 - 43:47)
Like that's like like so our our shops rate this instant is pretty much one tech per bay. Yeah. So like we're definitely not we're not really we've never really pushed the really track the hours.
We track the hours. We don't bust anybody's balls about the hours. Yeah.
We're working on rusty cars. It's one tech per bay. Stuff is going to happen.
That's going to be a hold up. That's either the car's got to go back together and go out. Stuff's going to happen.
Right. So like I can you know, we don't really it makes you want it like like in our shop. I would say that when it comes to people who don't produce a ton of hours.
I would say out of all them guys, any whenever I see low productivity, it's like we freaking screwed the pooch on the parts. Something unplanned happened. That's just not you know, you can always say, oh, well, person X should have known that was going to break.
That's not that's for people who don't deal with rust. Sometimes something looks good. Oh, yeah.
And you've been down that road. That subframe bolts meant you go to take it out and you're like, oh, that subframe bolts bro. Oh, I mean, that happens all the free.
I mean, I wouldn't say all the time, but it happens often. There's some things you can see. You're like, that's going to be a problem.
[Mike Allen] (43:48 - 43:48)
I need to do that.
[Bryan Pollock] (43:49 - 44:08)
Yes. Sometimes you get one that sneaks up on you. Right.
So absolutely. Like I would say that in most cases for us, the low production is probably something like that. It's not it's not straight up.
This guy sucks. Yeah. I mean, I can see it myself because I'm just I'm doing everything.
Do we have guys that just aren't fast?
[Chris Enright] (44:10 - 45:03)
Some people aren't just some people like what is the appropriate level of fast? If we if we take out compensation and we talk about just doing a quality job, is it reasonable to say that a technician should be able to meet book time? Book time is wrong on a regular basis.
But on the whole, the majority of the time, it's in the right realm. But I'm 150 percent efficient. Oh, I doubled that or whatever it might be.
But and then we have owners that are complaining about guys that are slow. Yeah. Right.
So what is a reasonable rate of production? I personally think 40 hours a week is doable. I think it's one to one number of hours in the building.
You should be able to have as long as front of house. Yeah, that's got to be a part of it.
[Bryan Pollock] (45:03 - 45:13)
They don't have their front of house together and their technicians are on four days and some days they leave early. I know people that have technicians that are working thirty five, thirty eight hours that are turning fifty five hours a week.
[Chris Enright] (45:13 - 45:18)
Yeah, I worked with a guy who worked with he retired from Honda. Like, but I would say that's an outlier.
[Bryan Pollock] (45:20 - 45:28)
So what I'm trying what I'm trying to do is a shop that does not have a ton of employees so they can probably keep more control on.
[Chris Enright] (45:28 - 45:31)
And it makes like it also depends on what you're working on.
[Bryan Pollock] (45:31 - 45:33)
Yeah, they work on everything.
[Chris Enright] (45:33 - 45:39)
For me, it's easy because I work on a lot of the same stuff. I stock a lot of the parts. I don't have to be running around.
Specialization helps.
[Bryan Pollock] (45:40 - 45:43)
Specialization helps a ton with efficiency. For my hot move.
[Chris Enright] (45:43 - 45:43)
I like it.
[Bryan Pollock] (45:43 - 45:48)
It makes so they don't have to come back in like I have. I have all the. Right.
[Chris Enright] (45:48 - 45:59)
Like this stuff, you know, you have it there. You don't have to deal with the part like I just put it on the repair order. I order one, but it's already there.
So then it just refills the one that was already there.
[Bryan Pollock] (45:59 - 46:10)
I got a ton of you have multiples. A big blue cabinet full of electrical engine components that are hot movers. So I can just do it now.
Make sure it's fixed and it's done.
[Chris Enright] (46:11 - 46:13)
Yeah, like I stopped timing components for V6.
[Bryan Pollock] (46:13 - 46:14)
Yeah, I want you if you were.
[Chris Enright] (46:15 - 46:22)
It doesn't make sense for me not to. Yeah, but most shops are not going to stock on the timing belt because they're not doing them as often as I am.
[Bryan Pollock] (46:22 - 46:27)
Yeah, GM oil and tranny cooler lines. All the part numbers. We have them all like for all the trucks built in the last 10 years.
We got them all.
[Chris Enright] (46:28 - 47:10)
I would also say part of it. See, there's some things people don't think about, too, is like your parts supplier. What do they keep in stock?
What do they not keep in stock? Like what's local? What's not?
Because then you're adding a layer of like, oh, well, this part's not going to be here for whatever. So is that person going to leave it here? You know, are we going to push the car back out?
So that's the point of frustration for me is across my organization right now, most of my techs have access to two bays. The small store is like one and a half shared, right? But it's like pull a car in.
You diagnose it or complete your DVI or whatever it might be. If you don't have authorization.
[Bryan Pollock] (47:11 - 47:12)
Pull another one in.
[Chris Enright] (47:12 - 47:14)
Right fucking now. Back it out. Put it together.
[Bryan Pollock] (47:14 - 47:22)
Push it out. I mean, push party, man. We hit it on the last push party.
Yeah, I mean, not the dealership.
[Chris Enright] (47:22 - 47:22)
It was like that, too.
[Bryan Pollock] (47:22 - 47:41)
I mean, in the summer, a lot of my a lot of my no starts and no cranks in the summertime. I don't even I don't even push them in the shop just to save time. Yeah, I just grab a fistful of shit in the laptop.
So I have a wiring diagram and we just go do it in the parking lot. And the world is full of motherfuckers who will drag their feet. Yeah, very much so.
[Chris Enright] (47:42 - 48:04)
Don't want to put the wheels back on, push it out. But then there's the same dudes who are complaining at the end of the week. They ain't got no hours.
So that everybody that they work with has got more hours than they got because they're being fed. Bullshit, man. It's because you're fucking lazy.
Yeah, true. That's what my frustration is, too. Like the argument with technicians like, oh, we have to have 100.
It's always 100,000. That's the magic number I found.
[Bryan Pollock] (48:04 - 48:04)
That's arbitrary.
[Chris Enright] (48:04 - 48:23)
We have to have 100. I like now 100,000 is not a big deal anymore. 100,000 is the minimum that you should be making.
So like I take away all the free tools that I have and I buy a lot of tools. I still don't even have $100,000 in total. I mean, you guys are oblivious to real world numbers.
[Bryan Pollock] (48:24 - 48:48)
Like break it down and show me. I'm telling you. Do you know how many people?
Do you know how many people have shown me this? I got $90,000 or they they'll tell me they got four times as much tool cost as I have. Yeah.
And their box is half less than half the size. I'm like, bro, that's not. Unless you bought everything at list and you're counting all the interest you're paying.
Yeah, like that.
[Chris Enright] (48:48 - 48:56)
Sure, maybe. I don't know. But like that's how many people told me my toolbox is $50,000.
And I'm like, I didn't even pay half that. Didn't even pay half that.
[Bryan Pollock] (48:57 - 48:59)
Try like $16,000 if you get the right deal.
[Chris Enright] (48:59 - 49:01)
Yeah, like that's the thing though, too.
[Bryan Pollock] (49:01 - 49:13)
They don't get, they won't wait. They won't wait for the right deal. They want it now.
They special order. They pay sticker. Or, or you can be like, we'll be by a $55,000 box for $16,000.
[Chris Enright] (49:15 - 49:55)
Whatever you want to do. And that's why I have such a hard time with like, like not all, but some are like the same people that are not the sit there and piddle paddle around and whatever are the same guys complaining or, you know, in on Facebook trash talking a shop because they're marking up their parts and that's a rip off. And they're like, but then they're the same guy that complains that they don't get paid and I'm like, what?
That's because those are the ones that you won't put a percentage to that are idiots. Yeah, basically, basically it's, there's a lot of that that goes on, but also the same guys who complain like, oh, we got to have $100,000 of tools.
[Mike Allen] (49:55 - 49:56)
They don't.
[Chris Enright] (49:56 - 50:01)
I get paid $40,000 a year. And you know what? That constant fucking truth that I hear.
[Bryan Pollock] (50:01 - 50:05)
What other trade do you have to go spend $100,000 on your, you know what?
[Chris Enright] (50:05 - 50:15)
If you go to, they, if you offer them a job and say, Hey, I'm going to provide all your tools. I'm going to give you a box full of tools that are, they, I don't want your fucking tools. I want my tools.
[Bryan Pollock] (50:15 - 50:15)
Yeah.
[Chris Enright] (50:15 - 50:19)
We did that at the, uh, whatever that fueling in the connections a couple of years ago.
[Bryan Pollock] (50:19 - 51:13)
And plus who's telling them they got to have that. I went, Mike picked me up from the airport yesterday. I went to his shop.
There's a guy working out of a modestly size tool cart. I shouldn't say a larger cart. Yeah.
I wouldn't call it like a full box. It's a larger car. This guy's probably getting his job done.
He's probably getting his job done. He's probably turning 40 some hours a week or more and you're probably paying him pretty decent. Yeah.
And he's got, you know, I didn't look through the thing, but let's say he had a mixture of, of whatever you can get from a Harbor freight or not snap on whatever that is worth buying, not snap on. Cause you're not bringing all the time. He's got that.
Right. And he's got snap on tools combined in there. Oh, maybe he's got 10,000 bucks tied up.
On the operation at the most. Yeah. That's I'm making assumptions that he'd have maybe some high dollar snap on.
So I'm making assumptions. Maybe not.
[Chris Enright] (51:13 - 51:40)
Well, one of the best texts I've had in 20 plus years, he has just opened his own shop like a 45 minutes down the road from me. Super happy for him. And he he had an immense tool collection spread across three boxes.
They were all the equivalent of Facebook marketplace or Craigslist purchases. Yeah. They're all like fucking Sears toolboxes.
So I do not care about my tool storage. I care about what's in them.
[Bryan Pollock] (51:40 - 51:45)
And they were full of quality. And they have to. It's all that's right.
[Chris Enright] (51:45 - 51:51)
That's you don't have to have the fancy box. I love the fancy box, but I don't have nobody made you go get it.
[Bryan Pollock] (51:52 - 51:52)
Yeah.
[Chris Enright] (51:52 - 52:01)
Nobody, anybody ever make you go get it. But I'm in general generational debt. You didn't know that generational debt.
My kids are paying for my nobody ever made you go get it.
[Bryan Pollock] (52:01 - 52:18)
Right. No, I like to have a nice one because I like to walk in and I like to look at it. Tommy Markham likes to have the Hunter alignment machine because he likes to walk in the shop, turn the lights on and see his freaking American made welded together.
Hunter machine. Just like I like to see my American made snap on toolbox that was probably made by some lady named Elaine in Algona.
[Chris Enright] (52:19 - 52:21)
Do you think Tommy touches himself while looking at us under equipment?
[Bryan Pollock] (52:22 - 52:23)
100%.
[Chris Enright] (52:23 - 52:29)
Oh, my God. But he just kind of he just takes his shirt off. No, no, this is a serious conversation.
[Bryan Pollock] (52:29 - 52:49)
People inventing expectations that nobody ever had of them. Yeah, I do think that that's a part of it. Nobody told anybody that they had to go buy 100 grand worth of tools to come work.
Like that doesn't happen in a shop. I think a part of it is like culture where we've bred a culture.
[Chris Enright] (52:49 - 52:55)
They're trying to have the biggest box in the shop. But that is like a culture of complaining, culture of complaining.
[Bryan Pollock] (52:55 - 52:56)
They chose it, though.
[Chris Enright] (52:56 - 53:02)
They chose it. That's what I always say. I'm like, you're an adult.
That's why I say stay off the tool truck when you start off in your career.
[Bryan Pollock] (53:02 - 53:17)
I can't remember the last time we've had all these guys in and out of multiple shops over 16 years now. I can't remember the last time I walked up to one of them and said, hey, man, you're going to have to go buy this tool.
[Chris Enright] (53:19 - 53:30)
No, but there are shops that do that. I can tell you 100% fact. Yes, I can tell you that.
100% fact that that does happen. It's stupid and that's 100% wrong in the shop.
[Bryan Pollock] (53:30 - 53:34)
I feel like there's a lot of people that put the pressure on themselves to have all this shit.
[Chris Enright] (53:34 - 53:47)
There are people that do that, but there are shops that do that. There are shops that tell their mechanics they have to go buy their own scan tools. We're not buying scans, which is just bullshit.
Even when I was at the dealership, we had two HDSs for like 15 techs.
[Bryan Pollock] (53:47 - 53:48)
That's bullshit.
[Chris Enright] (53:49 - 54:17)
Of course, I went out and bought my own laptop and I went and bought my own HDS because I I'm turning hours and I'm not waiting for the laptop. And then you have the guy in the corner who's on his cell phone all the time crying about hours that doesn't buy his own laptop. That doesn't buy his own.
He's got to wait. I think at that time, you know what he's doing on his phone. He's on a forum complaining about how he shouldn't have to buy $100,000 worth of tools.
So that's like I bought that stuff purposely. I bought a Maxi DOS when it came out and it did everything. The HDS 708.
Yep. Yeah, the DS 708.
[Bryan Pollock] (54:18 - 54:18)
DS 708.
[Chris Enright] (54:18 - 54:21)
I bought my own and then I bought a Maxi Sys Mini and I was buying all that stuff.
[Bryan Pollock] (54:21 - 54:42)
I was like, it makes me look at the number of my devices. That's just auto. That is 34, 34 scan tools.
We are across three shops. How hard is it to provide each technician with a bidirectional scan tool when the things are only 700 freaking dollars now?
[Chris Enright] (54:42 - 55:06)
But because a lot of these the bad shops, there are bad shop owners. We all know that. And they're...
Look, I've been a bad shop owner before, for sure. But here's my thing. I was arguing with somebody about this.
I'm like, okay, if you work for a bad shop, leave. And he's like, oh, it's not always that simple. And I'm like, I'm sorry.
[Intro] (55:06 - 55:07)
I'm like, it is.
[Chris Enright] (55:07 - 56:38)
I'm like, short-term pain for long-term gain. I'm like, when I left my first dealer or my first independent shop, I didn't have a job lined up. Had nothing.
I just, the dude screamed and yelled all the time. So I quit and put in my two weeks notice, had no job lined up. The day I left, my friend who I had been trying to get in a Honda for, just to tell you how much the industry has changed.
For two and a half years, I've been trying to work at this Honda dealership. The day that it was my last day of my two weeks, he called me and said, hey, a guy just put in his two weeks. And I went to Honda that day and got the job the day.
But I had no job for two weeks, no job lined up. When I left and went and worked for Honda and then left there and went and worked for my brother, I went from 70 K to 27 K. That was not an easy choice to go take a 50, almost $50,000 a year pay cut.
And then I went back to the dealership. That was not easy to quit working for my brothers for a year and a half. It was not easy when I left the dealership again and then went to an independent shop and worked there for three months.
And then I quit and then took like a five month break. Cause I told my wife, I'm like, I don't want to make that. Like the shop that I worked at for three months was horrible.
And I don't want to do that again. So I guess I'll make sure it's right this time. I interviewed at nine places.
All nine places gave me a job off. So I went from not being able to get into the dealership to nine places offered me a job. And I went back to Honda and then quit the same day when I quit there to start my shop.
I went in and I was like, today's my last day. He was like, what? I'm like, today's my last day.
[Bryan Pollock] (56:38 - 56:51)
I always hear that story out of people. It's not that easy. There's nowhere to go.
There's not good shops. And not every shop is a good shop. I don't know how many shops there are within an hour of my house.
There's a lot of them.
[Chris Enright] (56:52 - 57:37)
Can I pin that? I want you to come back to that thought. What percentage of independent aftermarket shops do you think are good shops?
Oh, maybe, maybe 5%, but there's a shop on every corner. I would say five to 10%. What percentage of technicians do you think are good technicians?
5%, but there's a tech on every corner. 10%. Are we talking like unicorns?
There's enough good techs to fill the good shops. Yeah, but are we talking like good techs as in what defines a good tech would be my question. Ethical and able to produce one-to-one with an acceptable level of comebacks.
I can put... Okay, I would put that higher than 10%.
[Bryan Pollock] (57:37 - 58:03)
I would say that's higher than 10%. I will guarantee you this right now. I can put, not me.
I can put within 30 minutes of my Sanborn shop, I can call five shop owners and put five of those guys to work this instant. But everybody will tell me there's nowhere to go. If you're a good tech, there's no good shops.
I can put in five other shops. I can put five guys to work at other shops.
[Chris Enright] (58:04 - 58:06)
There's five good shops that would hire a good tech right now.
[Bryan Pollock] (58:07 - 58:26)
Now, if I said, hey man, this guy can turn these hours. He doesn't have a lot of comebacks. He's got a good attitude and he's willing to learn.
I could put him in five shops. And I'm just thinking, I know for sure three of them would pay him while he's at training. While they're paying for the training.
[Chris Enright] (58:27 - 58:41)
So what you're saying is if you're a technician... That can do what you say you can do. That is not full of shit, but can honestly do what you say you can do.
And you're bitching about the environment that you're in right now. You know, I'm out in the boonies.
[Bryan Pollock] (58:41 - 58:43)
I'm out in the boonies.
[Chris Enright] (58:44 - 59:18)
What do you say? Grease the wheels? Grease, yeah.
If you can't find a good shop, let's say there's no good shops. And the one shop that you're at is the lesser of the evils, but it's still not a great shop. You're still underpaid.
This is not popular. Leave the industry. I know people hate me for saying that.
I don't care because I think the industry does need to be better. But also I'm not like me personally... Or move if you're willing to.
[Bryan Pollock] (59:18 - 59:53)
I know some people are not willing to move. The there's no good shops argument is people who are scared to leave. And that's not a dig.
Yeah, it's not a dig, man. If you got kids to support and stuff. It's very scary.
Very scary. I'm not digging on anybody. But instead of just being like, at least I know what this is.
So at least I know what this is going to be. And that's the unknown. Instead of saying that they just...
It is easier to sit on your couch and rage on the internet. Yes, I agree. It's easier to blame it on anybody else but yourself.
It is very, very scary. And I know that. I've done that.
Yeah. I know that.
[Chris Enright] (59:53 - 1:00:01)
It is. It's easier to do that as far as... What do they say?
It's better to the devil you know than the devil you don't or whatever.
[Bryan Pollock] (1:00:01 - 1:00:01)
Yeah, yeah, yeah.
[Chris Enright] (1:00:01 - 1:00:02)
That's the...
[Bryan Pollock] (1:00:02 - 1:00:04)
They know what they're dealing with. Yeah, so they know.
[Chris Enright] (1:00:05 - 1:00:09)
So they just... They're going to go somewhere else. They don't know what they're getting into.
Yeah, and they get comfortable.
[Bryan Pollock] (1:00:09 - 1:00:23)
But there's this thing where they're like, oh, there's no good shop to work at. I'm like, dude, I know people. I literally...
I can make phone calls. I can put people to work. Like, if you could...
Like, I don't do that because everybody's full of shit. And they can't actually do what they say they can do.
[Chris Enright] (1:00:23 - 1:00:41)
Well, and I would say too, there are some... Like anything, there are some outlier out in the country where you're far from... You're not close to a city, you know, whatever.
There probably are some very choice few. But the problem is, as soon as you say that, those people are like, oh yeah, that's me. That's me.
That's where I'm at.
[Bryan Pollock] (1:00:41 - 1:00:48)
Which statistically is just incorrect because 90% of the population lives... Blah, blah, blah, blah, blah, right? Statistically, it's incorrect.
[Chris Enright] (1:00:48 - 1:01:21)
I mean, I know a lot of shops in my area. I don't... I wouldn't say I don't know if they're good or not.
I know you can make a lot of money in them. Well, like for example, like Raleigh is a really good market for auto repair. There's a lot of good shops.
Yeah. There's a lot of decent dealerships in the area. And then there's a lot of crook dealerships and crook shops too, right?
But if you have a shop in one of the outlying suburbs, more than like within... Between 30 and 60 minutes from Raleigh proper, it's hard to get a good technician because they all drive to fucking Raleigh and get paid way more.
[Bryan Pollock] (1:01:21 - 1:01:43)
How many guys... How many guys with the... Now, you know more people than the average shop owner.
How many guys could you put to work in this area if they were that person? Not super crazy Mr. Johnny super tech, but could do what they say they can do. How many guys could you put?
Not you. How many phone calls could you make? Would you be like on the phone for the day?
[Chris Enright] (1:01:43 - 1:01:53)
Yeah, I mean... 100 guys? I would run out of capable technician applicants before I ran out of shops to place them in, I believe.
[Bryan Pollock] (1:01:54 - 1:02:06)
Do you think if you had 100 people that were proven good that you could find work for them and you didn't have to do your car fix thing and your job this week was to find work for them? Yeah. Easily find work for 100 guys this week.
[Chris Enright] (1:02:06 - 1:02:35)
Yeah, in this market, absolutely. But there's no good shops to go work at. I think a part of it is to like marketing.
Marketing your shop is a big part of it. Like I use this example all the time. Jamie Caldwell who has shops in Florida.
You see his content. You see his shops. They're nice.
They're clean. They're really well run. These guys are happy, whatever.
He made a post about looking for technicians online and he had more applicants than he knew what to do with. How many shops can say that?
[Mike Allen] (1:02:35 - 1:02:35)
Yeah.
[Chris Enright] (1:02:35 - 1:03:26)
Very few. There's a shop in this market right now who one of my former shop foreman that I lost when things went to shit last year. He's gone to that shop now and he's their lead guy and they've got a great online presence and it's built to market towards technicians and the shop's very clean and all of their online content is just the guys being goofy and having fun.
They've got a hot dog roller making glizzies in the shop. They've got a soft serve ice cream machine in the break room. Tell you because like simple stuff like that, no one's doing it.
It's like anything in marketing. It's smart, man. It's smart.
You market yourself like doing what nobody... They say do that for our customers all the time but technicians is the same exact way. Yeah, it's...
Do what nobody else is doing.
[Bryan Pollock] (1:03:28 - 1:03:54)
You look at certain shops and you're like, they probably, if somebody walks in there, they probably know what's up and it probably saves them, probably on the flip side, it probably saves them from interviewing the guy that doesn't know what he's doing because the guy might hold this idea on the exterior that I know every blah, blah, blah but he'll walk into a place that looks like that. He knows there's gonna be expectations. He's got up to depth.
He's in over his head.
[Chris Enright] (1:03:54 - 1:04:21)
Well, and how many... I mean, how little time are they dealing with interviewing anyways? How few of people...
Like what's their turnover rate? Probably not very often, I'm guessing. So, I don't know, it's probably 12, 18 months ago, you and Jim Kokonas wrote a technician quiz for me to give...
And you guys are not the right guys to write that quiz because your expectations are entirely too high and it was...
[Bryan Pollock] (1:04:21 - 1:04:22)
Yeah, I'm the problem.
[Chris Enright] (1:04:22 - 1:04:29)
It was like three sections carrying three different types of questions. Some of them were multiple choice and some of them were fill-in-the-blank.
[Bryan Pollock] (1:04:29 - 1:04:31)
I'm a little offended because I spent a lot of time trying to dumb that down.
[Chris Enright] (1:04:32 - 1:05:00)
And it was 30 minutes, get as far as you can and we'll look at it. And it was like three pages of questions or something. Yeah.
And I gave it to the first guy and he's like a L1 master tech, 25 years in the industry. He came in saying he was looking for like $55 an hour or something. And I was like, well, I mean, if he's worth it, he's worth it, right?
Yeah, sure. He made it through three questions when the 30 minutes was up.
[Bryan Pollock] (1:05:00 - 1:05:47)
He was still on the front of the first page. I don't think him and I spent that long writing that thing. And he was the only guy I ever gave that quiz to.
And he did find us on the internet and left some comments. You, I think, if I'm not mistaken, at that time you were in a position, you're like, dude, I'm looking for that guy. I'm looking for it.
You did say that in our defense, in Mining Ships defense. That's true. You said, I'm looking for that guy when I have the car that nobody can figure out and I'm in over my head and I'm losing my ass, I can give it to this guy and he will make my problem go away.
That's what you were looking for. And I was willing to, in the ad set, $150, yeah. Mike was ready to pay.
He was ready to go on a hundred and a half.
[Chris Enright] (1:05:47 - 1:05:48)
He was ready to go on.
[Bryan Pollock] (1:05:50 - 1:05:52)
Well, $150 doesn't pay a unicorn anymore.
[Chris Enright] (1:05:53 - 1:05:54)
No, not in this market.
[Bryan Pollock] (1:05:55 - 1:06:04)
Unicorns, $175 or $200 in this market. What are you laughing about, buddy? In this market, parts changers are making $125.
[Chris Enright] (1:06:05 - 1:06:20)
Depends on where they're at. I know lots of parts changers making $40,000. Yeah, I know.
And lots of parts changers making $70,000. Parts changers making $90,000. I mean, I know there are people who say that, but there's different markets.
Like that's maybe Sacramento.
[Bryan Pollock] (1:06:21 - 1:06:23)
This is a market that would probably pay more than ever.
[Chris Enright] (1:06:23 - 1:06:30)
This isn't Houston. This isn't DC, but it's not. I bet it's a top 30 market.
[Bryan Pollock] (1:06:30 - 1:06:33)
Sure, all day long. Yeah, this is a nice area.
[Chris Enright] (1:06:35 - 1:06:42)
But to me, that's not a parts changer. I don't think a parts changer. I mean, I guess unless they're like 200% efficient.
[Bryan Pollock] (1:06:44 - 1:07:58)
It all depends on how you're structured. It's the whole there's not one answer to everything. Well, sure.
If you got a guy that can... If Mike would have been able to find that guy that could do all the diag and get 15 diags railed out a day and feed it to two parts changers. I don't know.
If the combination of the three is doing $200,000 a month, guess what? Mike can pay a guy $100,500 and two parts changers $90,000 to make that happen. Absolutely, all day long.
All day long. So it's numbers, right? I understand what you're saying.
I do. I get it. Because I think people that will put in the work to develop the skills to actually solve the problems realize what work it takes.
And they're like, well, that's just lefty, loosey, righty, tighty. What's the deal here? Why are they making so much?
But the reality is on the business side of it, when you take the technical side out and you look at the business side, I've got a guy that can turn 50 hours a week. He can pay him $90,000, even if he can't Diag a light bulb. Because if you got a guy that can Diag a light bulb, you just go ahead and have this guy do the shit he's good at and collect the money.
Yeah. You know what I mean? I mean, I'm fine with that.
[Chris Enright] (1:07:58 - 1:08:00)
There's nothing wrong with that.
[Bryan Pollock] (1:08:00 - 1:08:02)
It's weird. It's weird. You're like, this is weird.
[Chris Enright] (1:08:02 - 1:08:04)
But there's a lot of people that can do both either.
[Mike Allen] (1:08:06 - 1:08:06)
100%.
[Chris Enright] (1:08:06 - 1:08:24)
I mean, I always say I'm not the greatest with Diag. I can figure it out intuitively a lot of times. Sure.
But when I'm looking at data and stuff the way you guys do, I can't just sit in the driver's seat and look at data and be like, yep, this is the problem. I can eventually figure it out by looking at the data and then putting everything together.
[Bryan Pollock] (1:08:24 - 1:08:39)
There's a lot of content made where you see that happening. First thing, A, that's usually not what actually happened in that piece of content. And B, even if it was, there's not the 300 videos of the guy getting his balls kicked in on other cars to be able to develop to understand what this all looks like.
[Chris Enright] (1:08:39 - 1:08:59)
I mean, the internet isn't real life a lot of times. Especially with that stuff. So there's a lot of that going on.
That's why I'm a big proponent of, if you're a business owner or mobile guy, whatever, get your house in order before you start making videos. Way too much of that going on. So what we have established.
Range speed is good. Techs are shitty. Yeah.
[Bryan Pollock] (1:08:59 - 1:09:02)
Techs are shit. Range speed is good.
[Chris Enright] (1:09:02 - 1:09:03)
The problem in the industry.
[Bryan Pollock] (1:09:03 - 1:09:04)
It's exactly what Chris said.
[Chris Enright] (1:09:04 - 1:09:13)
Chris said what he says. Owners are right. Techs are wrong.
No. If you disagree, hit him up in his DMs. Oh my god.
[Bryan Pollock] (1:09:13 - 1:09:22)
In his DMs. Oh jeez. Enright underscore automotive. I don't even know if that's correct.
Is that right? No, it's not.
[Chris Enright] (1:09:22 - 1:09:54)
I don't think it's correct. But at least you added the underscore. That helps me out a lot.
Actually, it doesn't matter if you type in Enright. It pops up automatically. When you're that big a deal, the algorithm just knows.
Did we touch on all the appropriate points? Any other conversational grenades you want to throw in there? Nothing I can think of.
We talked about everything. You heard it here first. Shop owners suck.
Techs deserve to be paid $200,000 a year. Even if they only turn 20 hours a week.
[Intro] (1:09:54 - 1:09:55)
Just for existing.
[Chris Enright] (1:09:55 - 1:10:06)
$200,000 a year before they go to training. And they have to spend at least $200,000 on tools. Minimum.
Minimum. The only industry that you have to spend $200,000 in.
[Bryan Pollock] (1:10:06 - 1:10:07)
Nobody else.
[Chris Enright] (1:10:08 - 1:10:15)
Nurses buy their own MRI machine. Somebody used that as an example. Do you know how much nurses spend on school?
[Bryan Pollock] (1:10:15 - 1:10:16)
Have you ever been to a hospital?
[Chris Enright] (1:10:16 - 1:10:39)
Do you know how much college costs? It's not an apples to apples thing. People just don't understand that.
My wife's been a dentist for 18 years. And we still have student loan debt. Yeah, that stuff's insane.
My wife was looking to go into school to be a teacher. And the school she was looking at was like $30,000 a year. She would have been $130,000 or $40,000 in debt to be a teacher.
To get a job making $40,000.
[Mike Allen] (1:10:39 - 1:10:40)
Yes.
[Chris Enright] (1:10:40 - 1:10:49)
Like that. And I'm like, okay. The only difference is it's easy to get those loans because they're government backed.
Versus, you know.
[Bryan Pollock] (1:10:49 - 1:10:56)
And a lot of the benefits now are they'll provide you student loan payoff assistance if you take a job in an underperforming district.
[Chris Enright] (1:10:56 - 1:11:40)
And people are horrible with their finances. Chris said technicians stuck. Thanks for listening to Confessions of a Shop Owner, where we lay it all out.
The good, the bad, and sometimes the super messed up. I'm your host, Mike Allen, here to remind you that even the pros screw it up sometimes. So why not laugh a little bit, learn a little bit, and maybe have another drink.
You got a confession of your own or a topic you'd like me to cover? Or do you just want to let me know what an idiot I am? Email mike at confessionsofashopowner.com or call and leave a message. The number is 704-CONFESS. That's 704-266-3377. If you enjoyed this episode, be sure to like, subscribe, or follow.
Join us on this crazy journey that is shop ownership. I'll see you on the next episode.