Protrusive Dental Podcast

🦷 Plaque Friday™ is here!

Get 20% off Protrusive Guidance Ultimate for as long as you stay, plus 7 days free to try it. That’s every masterclass, AskJaz, verifiable CPD on hundreds of podcast episodes, and our new live series Caries, Cracks and Contact Points with Dr Ronit Patel. Use code PF26 at checkout. Ends Monday 30 November, 11:59pm UK.
👉 https://protrusive.co.uk/plaquefriday

Are posterior tooth contacts really harmless?
Could group function and non-working side interferences be driving muscular TMD, headaches, and facial pain?
And can digital occlusal data change how we approach bite adjustment?
Dr. Jeremy Bliss joins the podcast to tackle one of the most controversial topics in dentistry: Selective Grinding/Equilibration for TMD but specifically Disclusion Time Reduction (DTR). With a strong focus on restorative technology, lasers, and T-Scan analysis, Jeremy brings a practical and experience-driven perspective to occlusion and bite therapy.
This episode breaks DTR down from the very beginning—what it is, how it differs from traditional equilibration, and why reducing posterior tooth contact during excursive movements may help certain susceptible patients. The conversation also explores canine guidance vs group function, macro vs micro occlusion, and where DTR fits within evidence-based dentistry when conservative care has failed.
 https://youtu.be/TMa11nh7VIU 
Watch PDP255 on YouTube
Protrusive Dental Pearl: Don’t buy advanced occlusal or motion-tracking tech unless your type of dentistry, training, lab support, and local backup can fully use the data—otherwise it’s just a Ferrari stuck in traffic.
Key Takeaways: Disclusion Time Reduction (DTR) & T-Scan
  • T-Scan: Provides objective data on tooth contact timing and force—impossible to see with the eye or articulating paper.
  • EMG: Tracks temporalis and masseter activity to show how muscles respond to occlusion.
  • Goal of DTR: Reduce posterior tooth contact during excursions, shifting contact to canines to relax muscles.
  • Patient Selection: Best for symptomatic muscular TMD; requires sufficient canine/incisal overlap.
  • Clinical Benefits: Reduces headaches, migraines, muscle tension, parafunctional damage, and progressive tooth wear.
  • Procedure: Conservative enamel adjustments (0.5–0.75 mm), guided by T-Scan; posterior teeth should disclude in <0.5 sec.
  • Implant Care: Prevent early loading to protect bone and restorations.
  • Evidence: Supported by systematic review and clinical cases; improves outcomes over traditional occlusal adjustments.
Highlights:
  • 00:00 Teaser
  • 00:53 Introduction
  • 09:51 Pearl: Buying Advanced Technologies
  • 11:53 Interview with Dr. Jeremy Bliss
  • 18:08 Introduction to Digital Occlusal Analysis
  • 22:46 Challenges and Controversies in TMD Treatment
  • 26:09 Explaining T-Scan and Its Benefits
  • 32:42 Understanding the Anatomy and Physiology of DTR
  • 36:25 Techniques and Tools for DTR
  • 38:14 Midroll
  • 41:35 Techniques and Tools for DTR
  • 44:19 The Impact of DTR on Muscle Tension and Pain
  • 48:43 Bruxism Cessation After DTR
  • 49:50 Importance of EMG in DTR
  • 52:05 Case Study: A Life-Changing DTR Treatment
  • 56:59 Conclusion and Future Directions
  • 01:00:46 Outro
Systematic Review
Effectiveness of T-scan Technology in Identifying Occlusal Interferences and its Role in the Management of Temporomandibular Disorders: A Systematic Review 
Individual Practice Contact: blissdental.co.uk – contact directly via the website form for information about DTR or patient referrals.
DTR Treatment for TMD with Dr Jaz Gulati in Richmond, London
#PDPMainEpisodes #OcclusionTMDandSplints #CareerDevelopment
To learn more about Disclusion Time Reduction, check out: Occlusograms are Lying To Us! Don’t Trust the ‘Heat Map’ – PDP247 
This episode is eligible for 1 CE credit via the quiz on Protrusive Guidance. 
This episode meets GDC Outcomes C
AGD Subject Code: 180 OCCLUSION
Aim: To understand the principles and clinical applications of digital occlusal analysis and Disclusion Time Reduction (DTR) for managing occlusion-related muscular pain, TMD, and improving restorative dentistry outcomes.
Dentists will be able to:
  1. Explain the concept of disclusion time and its impact on masticatory muscles.
  2. Describe how T-Scan and EMG are used to assess occlusal force, timing, and muscle activity.
  3. Identify appropriate patients for DTR and apply objective data to guide safe occlusal adjustments.
Cost:
Access to this CE activity is included with an active Protrusive Guidance membership. Current membership pricing is available at www.protrusive.app.
Cancellation & Refund Policy:
Memberships may be cancelled at any time. Access to CE activities remains active until the end of the current billing cycle. Subscription charges are non-refundable once processed. Full details are available at www.protrusive.app.

What is Protrusive Dental Podcast?

The Forward Thinking Dental Podcast

SEO METADATA

SEO TITLE:
Can Occlusal Adjustment Cure TMD? DTR and T-Scan Experience, with Dr Jeremy Bliss | PDP255

META DESCRIPTION:
Dr Jeremy Bliss on T-Scan, Disclusion Time Reduction and EMG: bite timing, who DTR may suit, how it's done, and the occlusion and TMD debate.

URL SLUG:
can-occlusal-adjustment-cure-tmd-dtr-t-scan

PRIMARY TOPIC:
Disclusion Time Reduction and T-Scan for muscular TMD

SECONDARY SEARCH TOPICS:
- What is Disclusion Time Reduction (DTR)?
- What is a T-Scan and how does it work?
- T-Scan vs articulating paper
- Occlusion and TMD: the evidence debate
- Canine guidance vs group function
- Using T-Scan for implant force management
- EMG in occlusal adjustment
- Choosing occlusion technology like Modjaw and Zebris

CAN OCCLUSAL ADJUSTMENT CURE TMD? DTR AND T-SCAN EXPERIENCE
THE PROTRUSIVE DENTAL PODCAST, EPISODE PDP255
HOST: DR JAZ GULATI
GUEST: DR JEREMY BLISS

EPISODE SUMMARY

On this episode of the Protrusive Dental Podcast, Dr Jaz Gulati talks to Dr Jeremy Bliss, a north-west London practice owner and certified DTR provider, about Disclusion Time Reduction: a T-Scan-guided way of adjusting the bite so the back teeth separate quickly in sideways movements, aimed at helping patients with muscular TMD. Jaz opens by sharing his own journey from sceptic to trained user, and acknowledges the polarised evidence on whether occlusal adjustment helps TMD.

Jeremy explains why articulating paper marks can mislead, how the T-Scan measures force and timing, its value for implants and recording adjustments, and why DTR needs EMG. He describes who DTR may suit, the need for canine or incisal overlap, how the adjustments are carried out over several visits, and a case treated at the Las Vegas summit. Jaz's Protrusive Dental Pearl is to check your dentistry, lab and support before investing in occlusion technology.

IN SHORT

Disclusion Time Reduction uses T-Scan timing data and EMG to adjust the back teeth so they separate quickly in sideways movements, which Dr Jeremy Bliss believes reduces muscle activity and can help patients with muscular TMD and headaches. The evidence remains debated, so Jaz advises conservative care first, careful patient selection and proper training.

KEY TAKEAWAYS

- Jaz's pearl: before buying occlusion technology, check it suits your dentistry, your lab and the support available.
- The T-Scan measures both force and timing, which articulating paper can't show.
- Jeremy says most dentists misjudge which articulating paper mark is heaviest.
- The T-Scan can alert you when an implant is loading too early.
- DTR aims to get the back teeth to separate within about half a second in lateral movements.
- Patients need canine or incisal overlap; without it, orthodontics may be needed first.
- Jeremy says DTR usually needs four to six appointments and must be guided by EMG.
- The evidence on occlusion and TMD is polarised, so Jaz recommends conservative care first.

QUESTIONS ANSWERED IN THIS EPISODE

1. What is Disclusion Time Reduction (DTR)?
2. What is a T-Scan and how does it work?
3. Why isn't articulating paper enough?
4. How does the T-Scan help with implants?
5. Who is suitable for DTR?
6. How are DTR adjustments carried out?
7. Why does DTR need EMG?
8. What should I consider before buying occlusion technology?

IN THIS EPISODE

1. Introduction: what is Disclusion Time Reduction?
2. From sceptic to believer: is it worth the investment?
3. Protrusive Dental Pearl: before you buy occlusion technology
4. Meet Dr Jeremy Bliss
5. Why articulating paper isn't enough
6. Learning DTR, and why headaches worsen with age
7. A polarised debate: occlusion and TMD
8. What is a T-Scan? Measuring force and timing
9. Adjusting in the mouth, with data to back it up
10. The aims of DTR, and who it suits
11. How DTR adjustments are carried out
12. Parafunction, muscle tension and bruxism
13. Why DTR needs EMG, and calibrating the sensor
14. A case from Las Vegas
15. Finding a DTR provider, why every dentist should analyse occlusion, and outro

CHAPTER 1: INTRODUCTION: WHAT IS DISCLUSION TIME REDUCTION?

JAZ:
Protruserati, what a blessing it is to have your attention for this introduction. I actually recorded the intro to this episode ages ago, many, many months ago, and the video file was corrupted. I'm so glad that happened, because since then I've been trained in, and now have experience of, the exact topic we're talking about today: Disclusion Time Reduction. Don't worry, don't panic.

I'll explain what that means very shortly. But essentially, I'm now coming from a completely different, much better place to have this conversation with you and guide you through what we'll be talking about today.

Our guest today is very experienced. His name is Dr Jeremy Bliss, and he's totally into technology in restorative dentistry. He likes lasers, and also the T-Scan. The T-Scan is something I bought a few years ago now. We've done episodes before with Dr Robert Kerstein, and recently with Dr Nick Yiannios, so you've heard about the T-Scan before. But don't worry if you're not up to speed; we'll assume you know nothing and start from the beginning. So let's do the usual basics first.

Hello, Protruserati. I'm Jaz Gulati, and welcome back to your favourite dental podcast. Today, with Dr Jeremy Bliss, we're taking a deep dive into Disclusion Time Reduction, aka DTR. It's very controversial, like many of the episodes we record here.

There are some controversial themes. Essentially, while this treatment modality can be additive, and we often add composite to the canines, a lot of it is reductive. That is, you take a bur to the tooth structure of the back teeth. It's a way of doing an equilibration, but not the typical equilibration you may have heard of, where you try to make MIP equal centric relation, with the condyles seated, and you have to deprogram the patient first.

It's nothing like that. This is a totally different type of bite adjustment, and the rationale behind DTR is to help patients with muscular TMD. There's also a secondary benefit, according to one of our mutual mentors, Dr Robert Kerstein, who's been on the show a few times now.

That second benefit is that, through doing DTR, he believes you get a more ideal occlusion, and that teeth and restorations will last longer after a DTR equilibration.

So what's this all about? Do you remember, some episodes ago, Dr Nick Yiannios described the back teeth as speed bumps? Imagine you're biting together in your maximum intercuspal position, your MIP, your normal bite: tap, tap, tap. Now, holding your teeth together, grind to the right. Some of you will be in canine guidance.

Some of you will be in group function. Now, very often on our live courses, I get people to do this, and I want you to do the same. You've probably done it before if you've heard me before. This time, press your teeth together, and press firmly.

What changed? Everything changed. The majority of you who were in canine guidance are no longer in canine guidance. You felt the back teeth rubbing. In the philosophy of Disclusion Time Reduction, we don't want back teeth rubbing. We want everything on the canines and forward, and there's a neurological reason for that, which we'll discuss in the episode.

So this camp believes that group function and non-working side interferences are bad. Whereas what I teach on our Bulletproof course, for example, is to look at the patient and ask whether their occlusion is working for them or not. If they're a low occlusal risk patient, so what if they've got group function?

Is it nice and smooth? Yes. Is it functional for them? Yes. Are there patients out there with anterior open bites living a great life? Yes. Are those back teeth potentially at increased risk in someone with an anterior open bite? Yes, I think we can all agree on that. But that in itself isn't a reason to intervene.

So what we teach on our Bulletproof course is that if the patient's occlusion is physiological and working for them, we can conform. So why did I buy the T-Scan, and why have I invested a lot of money over the years into learning DTR? Because for some susceptible patients, the presence of group function and these non-working side guidances, or interferences, whatever you want to call them, contributes to their muscular TMD: muscle spasms, muscle fatigue, facial pain, even brain fog, according to Dr Robert Kerstein.

CHAPTER 2: FROM SCEPTIC TO BELIEVER: IS IT WORTH THE INVESTMENT?

JAZ:
And let me tell you, guys, at first I was the biggest sceptic in the world. The first time I saw Dr Robert Kerstein lecture, it was a group of six of us, and we heckled him so much. I've thought long and hard about what to say in this introduction, because I don't want to be one of those people who buys something really expensive, like a really expensive car, and says, "Yeah, it's a great car,"

maybe because they're kind of pot-committed. Like when you go on a very expensive holiday and come back saying, "Yeah, it was amazing," but maybe it wasn't. Maybe you just feel you have to say that to justify the price.

So I want to say this: I've done lots of expensive CE in the past. I did an orthodontic diploma, as one of the first cohorts, and that was 20,000 pounds down the toilet. I'm just being very real and honest with you. It wasn't a complete waste. I probably got about 20% value, so let's say 5,000 pounds' worth of value from my 20,000-pound investment in that diploma.

So I'm happy to say, "You know what? It wasn't the best thing for me," and that's on me. That's my fault. So now that I've invested so much time and money in learning DTR, am I saying I believe in it because I've invested in it, or do I genuinely believe in it? From my experience so far, of doing DTR on four patients and using the T-Scan for some years now, I believe. I believe in using the T-Scan to get digital occlusion data, like timing, which really improves your precision.

And when it comes to whether adjusting teeth and the bite can help patients in pain: well, there's lots of evidence suggesting that no, we shouldn't do selective grinding or adjustments, a lot of it from the Manfredini group. And there's also an evidence base in favour of adjustments, including T-Scan-guided Disclusion Time Reduction.

So in a world with evidence for and evidence against, what do you do? Well, let me tell you what I do. I follow the guidelines, and I do conservative care first. But if that fails, what do you do? If you can help your patient with this bite therapy, what a great thing to be able to offer. So sometimes you have to look at the evidence base and ask why, in all those studies of selective grinding and bite adjustment, it didn't help patients.

The more you delve into it, you find that they were relying on carbon paper, on articulating paper. They weren't using sophisticated technology. Could that have something to do with it? Maybe. And one thing I'm seeing time and time again from peers and colleagues doing Disclusion Time Reduction therapy...

Again, we'll go super deep into this in a moment. I'm seeing some great video testimonials from patients about how much lighter their bite feels and how their headaches are gone, and that's really inspiring. For those of you who can hear this, this jingling is a thank-you card from one of my chronic pain patients.

I've been seeing her for about four years, and she was one of my exam DTR patients. Dr Robert Kerstein was there, guiding me throughout the entire DTR. We had the muscle leads on her and the T-Scan on, and Dr Kerstein guided me adjustment by adjustment through how to do a DTR.

I just loved getting this thank-you card from her, telling me she's never felt better. I'd tried everything with her. You name it, I did it. She'd had an MRI, seen a physio, had dry needling, this appliance, that appliance. We did everything appropriate in conservative care, but only once I carried out this treatment did it make a difference.

The cool thing is that the patient has all these muscle leads on, on the temporalis and the masseter, so you make an adjustment and see its impact on the physiology. For example, when you grind your teeth to the right, which muscles should be firing? Let me give you one example.

When you go to the right, the right temporalis should be firing, but the left one shouldn't. That one should be off, not contracting. But in a lot of patients with dysfunction in their bite, with what we call interferences, when you put them on the EMG, you see that all these muscles that should be relaxing are going off the chart.

Only once you make some adjustments and add a canine riser, for example, does that muscle finally go quiet, with no more spasms. When I say temporalis, I mean the anterior temporalis, because that's where we put the leads. So imagine the patient has muscle leads on their anterior temporalis and masseters.

So when I say temporalis, I mean anterior temporalis, not posterior temporalis. But it's a good way to explain what the data can show you, and this objective data is brilliant. What was really validating for me when I was learning DTR recently was that Professor Riaz Yar, someone in the UK whom I admire so much,

a mentor and a friend, was learning DTR at the same time as me, and we got DTR certified together. Because sometimes in dentistry you think, "Hmm, am I doing the right thing? Am I going about it the right way?" There are so many different ways to do any technique.

So we look for validation. We look around at which peers are doing what. When I saw that Professor Riaz Yar was also learning DTR with me, that was so validating. Now, I've gone down a bit of a rabbit hole, I appreciate that, and I apologise for rambling. I just got very excited.

CHAPTER 3: PROTRUSIVE DENTAL PEARL: BEFORE YOU BUY OCCLUSION TECHNOLOGY

JAZ:
I'm going to give you a Protrusive Dental Pearl, and then let's join the main interview. The pearl is inspired by a community member, Dr Ania Lidawska, based in Warsaw, Poland. She posted something great on our community chat about Zebris vs Modjaw.

Then we started talking about the T-Scan, and with all these technologies, I don't want anyone to make an investment that ends up gathering dust or becoming a coat hanger. With motion-tracking technologies like Zebris or Modjaw, or something as sophisticated as the T-Scan, you have to be sure you're in the right environment to use that tool and get the most out of it.

For example, if you're doing single-tooth dentistry, why do you need any of these tools? You don't. But if you're a prosthodontist doing full-mouth rehabs regularly, I'm thinking, how do you practise without them? The flip side is having a Ferrari but only ever driving it at 20 miles an hour.

So it has to be appropriate for you. For anyone who does implants, I think the T-Scan really shines, because it helps with force management around implants. It has a special implant indicator to make sure your implants don't get overloaded. And Modjaw and Zebris are amazing: you can look at the envelopes and the condylar guidance. Really great stuff.

But the big question is: can your lab actually use the data? If not, are you willing and able to change labs? If you get a Modjaw, you may have to send the data to a completely different lab that actually knows what to do with it. You also have to check what support you'll get in your country.

So these are all questions to ask yourself before making a significant investment. Will it work with your type of dentistry? Will it facilitate it? Will you have the right level of training and support? And do you have the right lab support to use the data you'll be providing?

Just think about that, because I don't want people getting really excited and buying things left, right and centre without doing their due diligence and their own research. Thank you, Ania, for inspiring that. Now let's join Dr Jeremy Bliss, and I'll catch you in the outro.

CHAPTER 4: MEET DR JEREMY BLISS

JAZ:
Dr Jeremy Bliss, it's so nice to have you on. I appreciate you rescheduling so my son and I could go to Legoland today. I just want everyone to know the backstory, so thank you very much. Jeremy, tell us about yourself and where in the world you are, and then we'll dive into your journey.

DR JEREMY BLISS:
Thank you, Jaz. It was a pleasure to let you spend some time with your son, and here we are. I practise in north-west London, in a little area called Temple Fortune. I qualified way back in 1985 from UCL, the dental school sadly now defunct. I spent 10 years as an associate, and then had a strange situation: I was talking to the principal about partnership, and all of a sudden he was throwing everybody out on three months' notice, so I had to set up on my own.

My wife found some premises not too far away, and we set up in the space of three months and two weeks. We sent out a bunch of letters, started off with three days of bookings, and it's carried on from there. I've been a practice owner now for 29 years.

JAZ:
It's interesting: you've been running a single-surgery practice, which has its advantages, but also disadvantages in terms of lack of leverage and so on. But 29 years in one place, set up the way you did it... what a wonderful way to serve your community and grow with your patients.

DR JEREMY BLISS:
It is a wonderful way, but the buck stops here. I get to make all the decisions, but I also bear the weight of all of them: hiring staff, ordering and everything else.

It's quite a lot. But I've got great staff who support me really well, and they've been with me for years, which makes life a bit easier. And over those 29 years, I've embraced quite a lot of technology. It keeps me interested, and it keeps the patients interested. I've got a bit of a reputation for being techie.

I've had digital x-ray since 2005, so 20 years, which isn't bad. I trained to place implants in 2003, got a Biolase Waterlase laser in 2013, CEREC in 2016, and then the T-Scan in 2022, actually early 2023. All these things combine to let me provide a different service to my patients.

They know I can treat their perio with the laser, among a load of other things. I can make their crowns the same day, and now I can use the T-Scan, which is obviously the subject of our discussion, to fix a whole host of problems, including chronic headaches and migraines, and beyond that. We'll talk about that a bit later.

CHAPTER 5: WHY ARTICULATING PAPER ISN'T ENOUGH

JAZ:
Yes, that's the main focus of today. It's great that you've embraced technology as an early adopter, and these technologies are now very much mainstream. With the T-Scan, it's interesting, because we T-Scan owners are outnumbered. I was listening to the episode I did with Robert Kerstein in March 2022, and eight weeks later I got my T-Scan.

So I've had it for three years now, and most times I mention it, people say, "A what?" and I have to explain what it is. It's fascinating how the uptake of this equipment varies from country to country and region to region. It comes from the occlusion category of devices.

So before we go deeper, Jeremy: is occlusion something that interested you, that you'd done further learning in? Or did the technology appeal to you in other ways?

DR JEREMY BLISS:
No, occlusion is something I'd had an interest in. Not to an obsessive degree, shall we say, but I'd certainly been on several occlusion courses, and I was always a bit unsatisfied with the information I got.

It was all about manipulating the patient's mandible, which I found quite difficult, and I didn't really feel it was the right thing to do. There was always a feeling in the back of my mind: are we actually doing the right thing by forcing people into certain positions,

just because we're told to? The background to all this, and it often comes down to family, is that my wife suffers from chronic headaches and migraines and is a bruxist. She looks to me to solve her problems. We've been married for almost 33 years, and I've used every different kind of device

I could get my hands on or make to try to alleviate her symptoms. She said something very telling to me as I was making her the latest piece of plastic: "Is this the best that 21st-century dentistry can offer?" And I said, "Well, yeah, kind of." Then I went to a lecture at UCL with Robert Kerstein, about two and a half years ago, and it was like a light bulb had gone on in my head.

He presents it in a way where you're looking at articulating paper marks, making decisions and drawing conclusions from those ink marks, and they're wrong. We're guessing. It was the realisation that I'd spent 35 years guessing at articulating paper marks.

That made me feel a bit humble, because there was always a small cohort of patients I hadn't been able to help. I'd made them splints or whatever. Some could wear them, some couldn't. Occasionally you'd get a success, and a patient would say, "Look, I'm wearing your splint and I can't do without it." But the majority of the time, they were either suffering a great deal of occlusal wear or just couldn't get on with it, and I really didn't have much to offer them.

So listening to Robert... he runs a poll during his lecture. He puts up a slide of articulating paper marks, takes a show of hands and asks, "Right, who thinks this one's the heaviest? Who thinks this one's the lightest?"

Invariably, 12 to 14% get it right. That means 85-plus percent of dentists are getting it wrong, and we're making decisions on that basis. We see heavy ink marks and decide they're the heaviest, when it's almost the most indistinct mark, the lightest one, which you'd ignore. So we're doing occlusal adjustments, and patients come back saying it's no better.

We look at the ink marks and say, "Well, they're all even. I don't know what you're talking about." Some of those patients stay, and others get disgruntled and we lose them. Then came the realisation that this device, which has been studied and shown to be about 95% accurate,

tells us a whole host of information we can never, ever know by sight with articulating paper. The way the teeth come together is too fast for the eye to see. And I thought, "Well, I've got to have one of these." A bunch of us agreed at the time, put together a group buy, and I got mine delivered, I think, at the end of January 2023.

Then, of course, you have to learn how to use it, because possessing a T-Scan isn't the solution. As with all this technology, you have to be trained in how to use it and interpret the data. There's so much data to interpret, and you have to learn to record the scans properly, so you actually know what you're looking at.

CHAPTER 6: LEARNING DTR, AND WHY HEADACHES WORSEN WITH AGE

DR JEREMY BLISS:
It's intuitive, but you can get it very wrong if you're not using it correctly. Thankfully, Clark Dental set up a series of webinars with Robert Kerstein, and he gave us a huge amount of his time. They were supposed to last two hours, but they always went on beyond that.

I learned something new from him every single time he spoke, and gradually I learned how to use the T-Scan. I probably got a bit overexcited to begin with and thought I knew what I was doing. Then he started talking about DTR, Disclusion Time Reduction, and using electromyography: sensors placed on the temporalis and masseter muscles to record their electrical activity simultaneously with the T-Scan bite.

That lets you see what the muscles are doing, and there's a huge amount of additional information there. I thought, "This is something I want to do." Then Clark brought Robert Kerstein over, and he came to a number of our practices. We treated some patients, he showed us what to do, and he brought all the equipment with him. Gradually, we learned the nuances and intricacies of this kind of treatment.

I decided I was going to train in it, so I've spent the last couple of years training with Robert Kerstein, through webinars and in person. I also came back just last week from the summit in Las Vegas, where I completed my certification. So I've been trained, done an exam and attended the summit, and now I'm a certified DTR provider.

That means I can use the T-Scan with EMG to treat chronic headaches and migraines, and I'll explain that in a second. And it works. I know it works because I've treated my wife, my daughter and my dental nurse. I had some DTR treatment myself on Friday from one of the other providers, which was my second appointment.

So I've got complete faith in it, because I wouldn't put my own teeth through this if I didn't. But there are some things I didn't fully understand, even after 35 years of practice. Why is it that people get into their forties and fifties and all of a sudden the headaches and migraines become more intense?

The reason is that they've spent three, four or five decades, depending on their age, building up those muscles, as if they were going to the gym every day and making them stronger and stronger. Then they become so strong that they either outgrow their blood supply, so you get ischaemia and lactic acid build-up, or they start to distort things.

For example, the temporalis inserts at five places in the skull. When it becomes over-enlarged, it can distort the skull, and you can end up with chronic headaches and migraines, but also ear symptoms, like tinnitus and vertigo. So this is a very wide-reaching treatment for people who are really at the end of their tether.

The common journey for the patients I now see is this. They get very intense headaches and migraines. Who do they see? Their GP, who refers them to a neurologist, who does an MRI and says, "There's nothing wrong with your brain." So they go and visit all the alternative practitioners.

They'll see a physio, a chiropractor, an osteopath, an acupuncturist, anyone but the dentist. I'll talk about my experience in Vegas in a moment, because we treated a patient there. But some of these people are at the end of their tether. They're on quite intense, shall we say powerful, medication: opiates, antidepressants and so on. Some have had surgery. And they're not getting better. It's honestly mind-blowing that you can adjust their teeth and alleviate their symptoms. And the-

CHAPTER 7: A POLARISED DEBATE: OCCLUSION AND TMD

JAZ:
It's also very controversial, Jeremy, and we'll touch on that today. We live in a very polarised world, don't we? On one side, we have the Daniele Manfredini camp, which categorically states that occlusion has nothing to do with TMD, zero,

and that you definitely don't want to be doing adjustments. That's fascinating, and they'd claim there's no good data to support otherwise, whereas we have DTR and T-Scan data, which they don't want to look at, for whatever reason,

whether they feel it doesn't meet certain criteria. I don't know exactly what it is. Then we have so many occlusal camps that believe occlusion is so important. I'll share my views a bit later, but isn't the polarity in our field fascinating?

DR JEREMY BLISS:
There's a huge polarity, and I think it's slightly political in some ways. Some people are so ingrained in their way of doing things that they don't want to consider anything else, and I think that's a lack of openness to the idea that you might be wrong. I was certainly happy to say I was wrong. I didn't completely believe in that side of things,

the CR equals CO camp, but I didn't know anything else. Then I came across an alternative, and it made complete sense. There are, I don't know, hundreds of scientific papers on the T-Scan and DTR. There was a systematic review last year that concluded it is helpful. So as for saying teeth have nothing to do with TMD, I've seen the evidence that says that's not true.

JAZ:
This is what I wanted to get at, and your experiences are very valid here. I'm due to be DTR trained in September this year. But I'll be honest with you, Jeremy, I'm still somewhere in the middle. I do respect Manfredini's work and the publications that come out, and the biopsychosocial model, as part of which...

there are instances where I've taken a completely hands-off approach and the patient's TMD has improved amazingly through completely minimally invasive means, and other modalities, such as appliances, weird and wonderful ones, have meant a significant improvement in patients' symptoms. So I'm kind of picking and choosing the right patient.

DR JEREMY BLISS:
I think I have an answer for that, and it relates to the great deal of, shall we say, incorrect interpretation of paper marks, and people delivering crowns and bridges that might not actually be in the correct occlusion.

If you analyse it properly, we don't have all our patients coming back saying, "I'm in pain. I can't eat with this." And the reason we as dentists get away with it, and we are getting away with it, let me tell you, is that our patients are very adaptable and very forgiving.

It's the ones who aren't adaptable, or who were but aren't anymore, because something has pushed them over their threshold. I believe most people have a threshold of adaptability, which is sometimes exceeded because their stress level has gone up. Then you make them a splint and it gets better, they stop using the splint, and they're okay until they exceed that threshold again. That's just my personal belief, from my own experience. And I'm not saying-

JAZ:
That's very accepted. Adaptive capacity is a widely accepted concept, and I totally respect that.

CHAPTER 8: WHAT IS A T-SCAN? MEASURING FORCE AND TIMING

JAZ:
But before we go deep into DTR, Jeremy, I want our colleagues to understand what a T-Scan actually is. If I say, "Oh, I've just bought a T-Scan," explain the bare bones of it, before we develop into how its uses have evolved, up to DTR.

DR JEREMY BLISS:
A T-Scan is basically an electronic sensor that measures pressure when you bite on it. That's all it is: a pressure sensor. It consists of vertical lines on one side and horizontal lines on the other.

Where they intersect, approximately one square millimetre, you get a reading. It reads the pressure and displays it as a column, colouring the column according to the degree of pressure. But it also measures timing, and timing is something you can't measure by eye or with articulating paper.

Very often a patient will come in and say, "You know that filling you did for me? It hurts when I bite." You use your articulating paper and can't really see much. Then you put the T-Scan on, and you see it's the first tooth to hit. Because of that timing data, you can adjust it so it doesn't hit first, and most of the time when you do that, the patient says the pain's gone.

It's just because it's being loaded early. So-

JAZ:
The timing issue, Jeremy... you're an implant practitioner. Mind you, I don't place implants. I don't even restore them. But when colleagues ask me, "Hmm,

"is the T-Scan right for me?"... forgetting about DTR and the role dentists may wish to play in managing TMD patients, because many very clever dentists don't want any part of it, which I respect... to understand who it's useful for: yes, it's useful for all dentists, but the more implants you do, where timing and force management are so critical, and the larger the cases and the more units, the more useful it is.

Most recently, I did an additive equilibration, full-mouth composites. And you can confidently have data showing, "Okay, I had a timing issue, hitting more on the left than the right," and after about 15 minutes I had not just my articulating paper, the sound or my fingers, but actual data supporting me, which I love.

DR JEREMY BLISS:
From the point of view of implants, consider that a tooth compresses about 38 microns and an implant about five. The last thing you want is the implant being the first contact. So really you want, I suppose, about 33 microns of tooth compression before you reach your implant.

Basically, all you want is to make sure your implant doesn't load early. When you load the information into the T-Scan and tell it a tooth is an implant, it will alert you if that implant is loading early, so you can make adjustments until the alert disappears. That's very helpful, because if you look at implants that load early, they get bone loss.

JAZ:
To add to that, Jeremy, the beautiful thing is being able to mark it as an implant and then make the correct adjustment. To help colleagues visualise what the T-Scan does in practice: we still use articulating paper. Say you see three red dots on that implant crown, and you know the implant crown is proud, or the timing is too early.

If the alert's gone off, isn't it wonderful that, out of those three dots, the software tells you which one you need to touch and which ones you don't?

DR JEREMY BLISS:
Exactly, because it shows you exactly where they are on the tooth. You can look at it and say, "Right, it's mesiopalatal, and that's the one I'm going to adjust, because it's showing the largest column."

So it's very informative in that way. And on the timing issue, it's recording every three thousandths of a second. The eye manages about 24 frames per second, if that. I mean, what's the cinema frame rate?

JAZ:
So even the OccluSense, by Bausch, I think it's called, which is like a-

DR JEREMY BLISS:
Yes, it's a similar thing, but it's got no data to back it up.

JAZ:
But timing is also the main component missing. The depth of timing data you get from the T-Scan is nowhere near matched. Whilst it might tell you about the force, it's the precision of the timing that's missing, which Paul Mandon-Gassman explained to me.

DR JEREMY BLISS:
It's fascinating to watch, because you can literally scroll through frame by frame and see how the teeth are hitting. It might be your upper right six on one side, then all of a sudden your upper left seven on the other, then the six comes in, then a few more. So you can actually see what's going on.

CHAPTER 9: ADJUSTING IN THE MOUTH, WITH DATA TO BACK IT UP

JAZ:
I was always worried about equilibration. It felt like a dark art: could I get into trouble medico-legally? The classic way of doing it is to rehearse everything on the models, write it down, then go to the mouth, as if every single step will go to plan in a squishy system.

DR JEREMY BLISS:
Yes. The biggest problem with that is that the TMJ isn't a milled brass joint. This often happens: you've made a large bridge, and you've had the lab put it in canine guidance.

The patient bites down on it, and they're in group function. Now, group function is something I was told was a positive thing. It's horrendous. Anyway, the reason it happens is that the TMJ is compressible and the masseter is pulling it up, so you can't extrapolate information from an articulator to the mouth. The best articulator is the TMJ.

JAZ:
I'm totally a believer in that. The best articulator is your patient, their TMJ, so intraoral adjustments. But, back to my point, I was always worried about doing adjustments because of the medico-legal scene. Now that I have objective data... if I scan someone after aligners or a big restorative case I've done, and they had 80% of their occlusion on one side and 20% on the other, and I knew exactly which two teeth it was hitting on one side, and then, as you go down to scan number seven, I've got them to, say, 52:48, then that's data.

That's my record that I took someone with an inferior occlusion and improved it, which justifies what are actually much smaller, more precise adjustments than we would have thought.

DR JEREMY BLISS:
That's the beauty of it. You can follow it through, go back, look at what you've done, see the result and review it. And yes, you've got the data to show if there's any kind of comeback.

JAZ:
I've also used it to balance not only the force but also the timing on minor orthotics, splints and complete dentures. So for restorative dentists, especially those with a bit more experience doing more units, or definitely implants, I think it's a big plus.

Not everyone may wish to use it for Disclusion Time Reduction, which we'll go into next, because it's dealing with patients in pain and needs additional training, which you've now had. So, having done the due diligence and the training, can you describe the objective of Disclusion Time Reduction, and how it differs from immediate anterior canine guidance?

CHAPTER 10: THE AIMS OF DTR, AND WHO IT SUITS

DR JEREMY BLISS:
Well, it doesn't differ. In fact, the way of achieving DTR is by achieving ICAGD.

JAZ:
Okay, so talk us through the aims of DTR.

DR JEREMY BLISS:
You have to go back to the anatomy, physiology and neurophysiology, and this was new information for me, though it might not be for everybody. The neurology of the pulp and the periodontal ligament is directly linked, through the reticular formation, to the nerve supply of the muscles of mastication.

So as soon as the teeth brush against each other, you get muscle activation. The other thing I didn't fully understand is that bruxing and muscle activation don't just happen at night. They happen throughout the day. Every time we swallow, we put our posterior teeth together, so we're getting muscle activation all the time.

And if the contacts between the teeth are, shall we say, never-ending, so the posterior teeth stay in contact whether you're moving into lateral excursion or protrusion, you'll get muscle activation all the time. Ideally, when you move laterally to the right, the left temporalis and masseter should switch off.

But if your teeth stay in contact, they don't. So the muscles never relax. They're always active, and just like going to the gym, over time you strengthen and build those muscles. So if you accept, and I do, though not everybody will, and we'll see what debate there is on this,

that allowing the teeth to disclude, the opposite of occlude, switches the muscles off, then what you're trying to do is reduce the time it takes for those teeth to disclude. Hence, Disclusion Time Reduction.

JAZ:
So, in layman's terms, for a student: once you go from MIP, the tap-tap bite, as soon as the mandible moves left or right, how quickly can you disclude the back teeth and get onto the canines?

DR JEREMY BLISS:
Yes. First of all, it's not for everybody. If the patient hasn't got canine overlap, or at least decent incisal overlap, you can't treat them. Sometimes, when they've ground down their canines, which is usually the case, you can rebuild some of that lift on the canines. But if they don't have overlap, you've got to create it.

So they'd need ortho to create a positive overbite, and then you could consider treating them. It's not for everybody, and I need to put that disclaimer in first: if there's no canine overlap, you shouldn't be treating these patients. You should be sending them to the orthodontist and saying, "Give me incisal or canine guidance."

JAZ:
The classic scenario, Jeremy, is a severe Class II division 1 with a large overjet, where the mandible is too far back or the maxilla too far forward, usually the mandible too far back. They're miles away from canine guidance and forever stuck in group function, so you know you won't achieve it.

DR JEREMY BLISS:
No, although sometimes you see them with the canines in contact, in which case you can. There's someone I know very well whom I wanted to treat, but she hasn't got canine guidance and she suffers terribly, and I'm trying to persuade her to get ortho so I can fix it for her. But assuming we've got a patient with sufficient overlap who's in group function, sometimes it's just because of the way the posterior teeth are orientated. If they're at that sort of angle, you'll get more-

JAZ:
Can you describe that for our audio listeners, Jeremy? It's good you're showing it visually, but yeah.

DR JEREMY BLISS:
If the teeth are leaning in towards the lingual side, you end up with a great deal of friction between the buccal cusps of the upper and lower teeth, and those are often some of the harder ones to treat.

CHAPTER 11: HOW DTR ADJUSTMENTS ARE CARRIED OUT

DR JEREMY BLISS:
But essentially, these aren't radical adjustments, okay? Patients wouldn't be able to function if they needed radical adjustments. They're functioning, but the teeth aren't letting go. The aim is sort of the opposite of what we were taught with dentures.

Instead of BULL, buccal upper, lingual lower, we're trying to get holding contacts on the palatal cusps of the uppers and the buccal cusps of the lowers. And we want the buccal cusps of the uppers and the lingual cusps of the lowers to completely miss the opposing teeth when we slide into lateral excursion. That's done using the T-Scan, and also articulating paper, because we want to mark up those contacts.

Essentially, we're carving good contacts out of bad. We want to reduce any lateral friction on the teeth. We keep our holding contacts, the cusp tips, central fossae and marginal ridges, and remove everything else so the teeth disclude.

We're talking about probably half to three-quarters of a millimetre of enamel at most. People say, "Well, I don't want you removing my enamel." And I say, "Well, okay, but you're removing your own enamel, in an uncontrolled way. I'm going to do it in a controlled way, using the digital technology I have, so you don't keep removing it in an uncontrolled way."

That's basically what we do. Until you see it being done and learn how it's done, it's difficult to describe. But essentially, you want those cusps to miss each other, and you can measure that timing on the T-Scan. When you get them to move into lateral excursion, you can see which teeth remain in contact, because you divide the arch into the anterior teeth, the incisors and canines, and the posterior teeth.

The reason you do that is that the neurophysiology of the incisors and canines is completely different from that of the premolars and molars. You divide it into four quadrants, positioning your quadrant line just behind the most posterior contact on the canine on the side you're recording.

You look at the contact shown by the coloured lines representing the posterior quadrants. You want them to drop to zero as quickly as possible, and the T-Scan will show you the time it takes. The rule of thumb is that you're trying to get it below half a second.

Again, that's not something the eye can see. Generally, what I do, and this is how Robert teaches it, is carry out three sets of adjustments, polish the teeth, check visually that the teeth actually disclude, and then record it on the T-Scan and see whether I have more refinements to do.

What's fascinating is that these patients come in very tense, and I've done quite a few now. You make a set of adjustments, and they say something like, "Everything feels lighter," or "Everything feels calmer." You've got an immediate change within an hour-and-a-half appointment.

The first appointment is quite long, and they feel the difference. Now, if it didn't work, they wouldn't feel any difference. What happens is they go home and feel better for two or three days, and then the symptoms come back. The reason is that you've been compressing the molars and premolars in their sockets, so they rebound, and the muscles of mastication have been shortened and tense, so they lengthen, and the position of the mandible changes slightly.

So it's not a one-off treatment. It takes on average four to six appointments before they're fixed, but then it's pretty much permanent. When the systematic review came out last year, I happened to notice people congratulating Robert on it, although he had nothing to do with it. But it does vindicate his work. One of his patients-

JAZ:
I'll put that systematic review in the show notes, Jeremy, for everyone to download and digest, because I think it's important for everyone to do their due diligence.

DR JEREMY BLISS:
Absolutely. But one of his patients got in touch on Facebook and said, "You fixed me 45 years ago, and I haven't had a headache since." For me, that's very, very powerful.

CHAPTER 12: PARAFUNCTION, MUSCLE TENSION AND BRUXISM

JAZ:
Again, I love this from my restorative perspective, though I'm yet to embark on DTR. I have patients on appliances; some absolutely swear by them. And there are patients who I think would really benefit from DTR, because wearing an appliance long term isn't necessarily something they want.

I do think there are patients who fit this category, but I also think some may fall more into the psychosocial category than the bio. So I'll be assessing that. One thing I want to get my head around, not to challenge you: you've done a lot more DTR, with lateral excursions.

When we start in MIP and move left and right, that's a parafunctional movement. When we're functioning, we chew from the outside in. So how does that serve us during the daytime? The adjustments we're making are based on movements from MIP going left and right, but when we chew, we chew differently. How does that feed into what the T-Scan does?

DR JEREMY BLISS:
First of all, our teeth spend very little time together when we chew food. So you don't necessarily get the same kind of problem when eating, although you do get tired muscles. So parafunction leads to discomfort when eating, but it's not the eating that causes the problem; it's the parafunction.

I'm not 100% certain on this, but parafunctional movements can take various forms, and people make the strangest movements with their teeth at night. Often they'll move into some kind of protrusive and lateral excursion and then bite down hard, and I've seen the effect of that: chipped anterior teeth.

But essentially, if you make the teeth work correctly, it reduces muscle tension, and by reducing muscle tension, you reduce the forces on the teeth. So there are two aspects. First, you've got the chronic pain sufferer with headaches, migraines, and tension in the neck, shoulders and goodness knows where else, because it can translate down the entire body and affect posture.

But you've also got the habitual bruxist who's gradually wearing their teeth down or breaking them. Cracked lower sevens seem to be the most common, in my experience. If you can reduce the muscle tension, you can stop them doing that. I had a patient like this who was fracturing upper premolars, and she had a very intense pulpitis; I could barely touch the tooth.

I couldn't get it anaesthetised, and it took a few appointments before I could actually treat it, because it was cracked. So when she started developing symptoms on the other side, I said, "I think we should do DTR and take the tension out of the system,"

not because she was suffering unduly with headaches and tension, which she was, but living with it, but because she was going down the same road with the other premolar. So we did the DTR and took the tension out of the muscles. Interestingly, at the beginning the tooth was quite sensitive to adjust, but after two or three appointments, it didn't hurt at all, because we'd taken the load off it. And as a side effect, she started reporting that all the tension was going from her head and neck.

That was just an additional bonus; it wasn't our original reason for doing it. So there are all sorts of benefits in that respect. This is just the way Robert Kerstein developed DTR and ICAGD, and it takes the tension out of the musculature. If you take the tension out of the musculature, good things happen.

JAZ:
You mentioned earlier that how we use our teeth during the day is an issue. Are you suggesting patients brux during the day and get their teeth into contact?

DR JEREMY BLISS:
I think we do, and certainly we clench.

JAZ:
Yes, a hundred per cent.

DR JEREMY BLISS:
The difference between clenching and grinding, shall we say, is a fraction of a millimetre. Many of us sitting at a computer with a difficult problem to solve are probably clenching and bruxing slightly. It's when it becomes highly tense that it becomes a problem.

JAZ:
And that goes back to adaptability.

DR JEREMY BLISS:
Yeah.

JAZ:
In that patient as well, which is a very good point. The other thing is, I'm being very brave and disagreeing with Rob Kerstein, because he's visiting my practice to train me in DTR on 15th September. But hear me out, Jeremy. I'm being very open-minded. I'm happy to learn from the Manfredinis of the world and the Kersteins of the world, and I want to work this out over the next decades, safely, led by data and science. But one third of evidence-based dentistry is clinician experience, and we hope to develop that more and more.

Also by speaking to colleagues like you; there's so much we can learn from each other. But one thing Rob says is that after a patient has had DTR, they will, or may, I don't know which word you'd use, stop bruxing. I'd just like to see empirical evidence of that, whether from sleep data or something like a BruxChecker, because my experience with my patients, of getting them into as immediate canine guidance as possible, not yet verified by DTR, because I haven't been using it that way...

I will be. But I'd just like to see that, because I think bruxism is something centrally mediated. It will still happen, just in a more benign, beautiful way, on the canines rather than the back teeth. What have your experience and observations been?

DR JEREMY BLISS:
To be perfectly honest, I agree with you. I think it's centrally mediated. Clenching and grinding is something we do, but if we can make it non-destructive, both to the muscles themselves, by not soaking them in lactic acid, and to the enamel, by not grinding it down, then I'm prepared to accept that it becomes something that doesn't bother you anymore.

I think that's more the issue. I don't think people stop. I know from my own experience that patients I've treated say, "Well, I still grind my teeth, but it doesn't hurt."

CHAPTER 13: WHY DTR NEEDS EMG, AND CALIBRATING THE SENSOR

JAZ:
Okay, that's interesting. As I said, I'm willing to change my mind over the years as I collect more data. I'm on that journey, and it's one of the things I'm learning. And I'm a fan of the objective data you get from the T-Scan, and I'm looking forward to using it this way. One thing about DTR, and again I'm playing devil's advocate: with EMG, I get it. You can see what the muscles are doing at the same time as the movements.

I get it. But imagine I removed the EMG data, and your timing data still looked good and you liked it. Do muscles do surprising things? Is that why we need EMG to back it up? Or are the timings predictable enough that you don't need the EMG? Where are we at with that?

DR JEREMY BLISS:
You can't do DTR without EMG, because you might have achieved a disclusion time below 0.5 seconds, but if you don't know what the muscles are doing, it might not be enough.

JAZ:
I see.

DR JEREMY BLISS:
Some people might need 0.2.

JAZ:
Got it.

DR JEREMY BLISS:
Some might need 0.1. You see quite a lot of interesting data. When you hook someone up to the EMG, very often you'll see muscle hyperactivity just in the resting phase, so you know those muscles are in a bad state. Then you get them to clench, doing your multi-bite clench, which is basically clench, hold, relax; clench, hold, relax.

That's important for two reasons. First, it trains the patient to clench into the sensor. Second, it trains the sensor to the shape of the patient's arch, so you get the best possible data. Before that, you have to calibrate it so you don't get too many pink columns, pink being the most intense.

What's quite interesting about pinks, which I learned in Vegas, is that pink is the maximum saturation of the sensor, but it doesn't mean the column has only just reached that level. It could be way higher. It's just the maximum pressure it records, 255 out of 256 levels or however many, but the real force could be much higher.

It just doesn't record any higher, which is why it's so important to have three or fewer pinks. To explain to listeners: you get a variety of colours, with a colour scale at the bottom of the screen, so you don't have to guess. It shows the gradation from blue all the way up to pink, via green, yellow and red, to tell you the intensity of a particular contact.

When you calibrate the sensor, you're trying to make sure you don't get too many of those pinks, because essentially that's meaningless data. That's part and parcel of learning to use the T-Scan properly.

CHAPTER 14: A CASE FROM LAS VEGAS

JAZ:
Absolutely. My training from Rob Kerstein has been very helpful for learning those principles, and I look forward to learning DTR now. Shall we finish, Jeremy, with a case study or a story?

DR JEREMY BLISS:
Yes. I think the best story I can tell you is about the patient we treated in Vegas.

JAZ:
Oh yes, I'd love to hear that.

DR JEREMY BLISS:
The course in Vegas is run by Robert Kerstein and also Ben Sutter. Ben Sutter was trained by Robert, I think 15 or 20 years ago; I can't remember exactly. He never intended to start teaching, but he's produced, I think, 194 YouTube videos so far. If you want to learn about DTR and the T-Scan, Ben Sutter's YouTube videos are well worth a watch, and if you're an insomniac, you might get through all 194.

Anyway, this patient had contacted him, and she was pretty much at the end of her tether. She lived in Phoenix, Arizona, and Ben is in Oregon, so he offered for her to come to Vegas. She's 63 years old and has been suffering for 27 years.

She had been given a diagnosis of trigeminal neuralgia. It was idiopathic, because there wasn't any particular cause; her symptoms just fitted. So the neurologist said, "You've got trigeminal neuralgia. Get on with it." They put up the list of drugs she was on, including OxyContin, oxycodone, antidepressants and numerous other medications.

It literally filled three columns. If she was going out with her grown-up daughters and grandchildren, she'd have to get up two hours early just to get ready. She'd get 20 to 30 strikes of pain across her temple and forehead every day on the left-hand side, which is why it was called trigeminal neuralgia.

She couldn't bear her hair touching the left side of her face, and she couldn't sleep on her left side. It took her hours to get to sleep. She was trying not to take too high a dose of the oxycodone and OxyContin, but most days she'd take them in the morning and the afternoon. And she'd had two surgeries, because they decided an artery was pressing on the trigeminal nerve. So they'd done two surgeries-

JAZ:
Decompression surgery, isn't it?

DR JEREMY BLISS:
Decompression surgery. They did it twice. Why? Because the first one didn't work. And guess what happened with the second one? It didn't work either. I don't know if you know about those decompression surgeries, but if you nick the artery, you can't stop the bleeding.

About 2% of those surgeries are fatal. Luckily, she survived. She was very lucid and a very good speaker, describing her symptoms, and she also said she'd built up a stock of these drugs, so that if at some point she decided she couldn't carry on, she might take an overdose.

So it's pretty serious stuff. They put her on the T-Scan, and you could see what her muscles and teeth were doing. There was a very long, or non-existent, disclusion time, because the teeth remained in contact. Then, at the dental school in Las Vegas where we were, she went downstairs, and Ben Sutter put a camera on his head and started doing the DTR adjustments.

She came back the next morning and said, "I can stand my hair on the side of my face now without any problem. I slept really well, and I slept on my left side." That was just overnight. So she doesn't suffer from trigeminal neuralgia, and by adjusting her teeth, she felt way better. I'll have to check, but I may be able to share those videos.

It's remarkable. You're getting patients who are being labelled and put on really strong, addictive drugs, and it's their teeth. Now, not everybody with trigeminal neuralgia needs DTR. In fact, not every patient needs DTR. I tend to triage patients according to whether they're suffering, because if you're not suffering with any kind of headache or pain, I'm not going to try to sell you DTR. I don't try to sell DTR at all. I wait for the patient to ask for it. I might suggest it as a treatment, but I won't sell it.

JAZ:
Perfect. That's very compelling, and I look forward to my training here. I've been part of those webinars, and I've seen the YouTube content from Ben Sutter and Nick Yiannios, and another speaker who's presenting at AES in February 2026, so I'll be there to see him.

So there's lots of great stuff, and I can't wait to get stuck in, but in an initially conservative and judicious way, a bit like you said. You've got to pick your cases, and I love that you said "triage".

DR JEREMY BLISS:
Maybe a little scepticism.

JAZ:
What's that? Sorry.

DR JEREMY BLISS:
Maybe a little scepticism.

JAZ:
Yes. I think that's good to have when you're doing adjustments, in a world with such strongly polarised opinions. Taking cautious, well-controlled steps, led by science and data, which I like, and with the right level of training, which I'll have done by the end of this year and you've done already. So, to wrap up, first, thank you, Jeremy, for sharing that story and explaining what the T-Scan and DTR are.

CHAPTER 15: FINDING A DTR PROVIDER, WHY EVERY DENTIST SHOULD ANALYSE OCCLUSION, AND OUTRO

JAZ:
Tell us how people can reach out. If someone in your area wants to refer a patient they think might be suitable, what's the best way?

DR JEREMY BLISS:
Currently, six of us will have set up a website, by the time this comes out, where patients and dentists can contact us: dtrdentists.co.uk.

We're quite nicely spread out geographically, and we don't want to compete with each other; we just want to help people. For patients, it'll be an information resource. They'll be able to contact any of the six of us for more information, make an appointment, whatever they want to do.

For dentists, there'll be a resource where you can refer to us. We're also going to start teaching dentists about the T-Scan and DTR. And by the way, I have no affiliation with Tekscan or BioResearch, nor will I get any payment. Clark Dental are the distributors in this country, although they can't currently distribute the EMG.

You have to get that from America. But I don't get any payment or kickback. This is purely because I believe dentists in this country need it. They're buying scanners to take impressions digitally and record things accurately. They're using digital x-rays to reduce their patients' dose, and to manipulate and view radiographs in greater detail.

But they're still stuck in the dark ages, with articulating paper as their only way of determining the occlusion. Dentists need to know there's a device that will make their dentistry much better. It'll reduce the number of patients coming back complaining that something's uncomfortable, and it'll make you a better dentist, because you'll start designing your crowns in a way that doesn't create group function,

getting your patients into canine guidance. One thing I believe wholeheartedly is that orthodontists should have a T-Scan. How many of these patients have nicely aligned teeth, but an occlusion that's shot to hell? And they're suffering. They may not suffer initially, when they're young, but 20 or 30 years down the line these people are suffering, because their teeth aren't striking in the right way.

JAZ:
That's what Rob calls the difference between the macro-occlusion and the micro-occlusion.

DR JEREMY BLISS:
Micro-occlusion, indeed.

JAZ:
Brilliant. I'll put the link in the show notes, dtrdentists.co.uk, so people can reach out to you. Jeremy, thank you so much.

DR JEREMY BLISS:
I also have my own website, blissdental.co.uk, where anyone can reach me via the contact form. There's information on DTR on my website, and we just want to educate and bring this message. Having been enlightened ourselves, we feel dentists in this country aren't aware of this. Now, there is an investment.

It's not a cheap piece of equipment. It'll be difficult for some associates to persuade their principals to get one. Maybe the principal will get one but not want to buy one for the associate. But a second T-Scan handle isn't as expensive as the first, because with the first you're basically paying for the software.

You can network it within your practice and have more than one handle. Ben Sutter apparently has four or five T-Scan handles. So I think this is something 21st-century dentistry really needs to adopt. You don't necessarily need to be a DTR provider, but I think you need to be analysing your patients' occlusion and making sure you're not putting a problem in.

JAZ:
Well said.

DR JEREMY BLISS:
You're taking the problems out.

JAZ:
Amazing. Jeremy, thanks so much for your time. I'll put all those links in, and I look forward to networking and meeting in person. I'm sure our paths will cross a lot, especially now we're in the same T-Scan space.

DR JEREMY BLISS:
We'll definitely see each other in September, because most of us who've already qualified will probably be attending the summit in September, so our paths will definitely cross.

JAZ:
Perfect. See you then, Jeremy.

So there we have it, guys. You listened to that Jeremy Bliss episode all the way to the end, and you deserve a pat on the back. If you're on one of our paid plans, go on the app and answer the quiz. You may be in the kitchen right now, or you might have listened on Spotify or watched on YouTube, but if you're an app member, just spend two minutes answering the questions, get 80%, and Mari, your CE queen, will send you your certificate.

Before you know it, by the end of the year, you'll have racked up 50 to 100 easy hours of CE. We're a PACE-approved education provider now. Every past episode and all future episodes, including this one, are being fed into AskJaz, our Protrusive AI. Congratulations to everyone who got in before the January 11th deadline and had it included as part of your subscription.

That's amazing. And not only are we feeding in every episode, we're also feeding it excellent information in a copyright-respecting way, so that by June 2026 we want to get to a point where there's very little you could ask it that it can't answer. Because every day I get an email saying, "Hmm, AskJaz didn't have an answer to this."

It's something like, "What's the difference between Kalzinol and Cortisomol?" Because we've never discussed that on an episode, and I've never compared those two materials on a live course, it's not in there. But here's the thing: we'll keep feeding in my live courses and everything we do online.

Plus, we'll make sure that for anything you can think of, like which antibiotics can I give someone with renal impairment, or the differences between a couple of materials, even if we've never discussed it on a podcast, we'll find an ethical, good way to feed it in. As tempting as it is to insert an entire dental materials PDF, that would be a copyright breach.

So we're being very selective about which content we feed into AskJaz, which will let its clinical reasoning shine. And one more thing at the very end, guys: it's a very exciting time to be part of the Protrusive community.

We've got some wonderful things planned. Let me read out what we have planned for this year. Starting next week, we're kicking off monthly themes. For January, with the few weeks we have, the theme will be perspective and gratitude. Then I'll read out the themes for the rest of the year.

A lot of the posts on the community, and some of the podcast content, will be around perspective and gratitude. February is personal finances and career security. I look forward to sharing some of my personal financial philosophy with you, and referencing some of the great episodes we've done on that in the past.

March is AI and dentistry. It's the buzzword, but I want to make sure that those of you not using AI at all feel comfortable in this new world we've entered, and that those of you who are all into it are using it in the most optimal and ethical way possible.

April is stress, pressure and burnout. That goes without saying; we do it pretty much every April. May is clinical clarity and decision-making. Every week we'll post a new protocol and decision-making guide, from caries removal to cracks: things we see day in, day out. June is relationships that support your career.

Think about your relationship with your boss, your dental assistant, your mentors and the wider team. That's an interesting one. July is my favourite: learning from failure. Actually, it's my second favourite.

My favourite is still to come. August is record keeping and systems. We all fall to the level of our systems, right? That's super important. September is communication that protects you. So yes, we'll go into communication, but also how best to use communication skills to protect us and our careers. October, my favourite, is occlusion and force management.

November is personal development plans, getting you thinking about the year ahead, 2027. And December will be reflection, meaning and legacy. What a wonderful time to do that. We'll have weekly posts around each theme, a new monthly theme every month, and we'll continue this year on year.

So it's a very exciting time to be part of the community. If you're listening to this, it's free to join the community. It may not be in future, but right now, I'd get in there if you're not already. There's an Android app and an iOS app. Just go to www.protrusive.app and join the community.

If you're not a dentist, please don't bother; you won't be let in. Otherwise, I'll see you on there. Guys, thank you so much for listening all the way to the end. I'll catch you same time, same place next week. Bye for now.

FREQUENTLY ASKED QUESTIONS

QUESTION:
What is Disclusion Time Reduction (DTR)?
ANSWER:
As described by Dr Jaz Gulati and Dr Jeremy Bliss, DTR is a T-Scan-guided bite adjustment that aims to make the back teeth separate as quickly as possible when the jaw moves sideways, so the canines and front teeth take over. Its rationale is to reduce muscle activity in patients with muscular TMD. Jaz notes the evidence is debated.

QUESTION:
What is a T-Scan and how does it work?
ANSWER:
Dr Jeremy Bliss explains that a T-Scan is an electronic pressure sensor the patient bites on. It shows how much force each area receives, as coloured columns, and records the order and timing of tooth contacts every few thousandths of a second. This timing information can't be seen by eye or with articulating paper.

QUESTION:
Why isn't articulating paper enough?
ANSWER:
Jeremy says articulating paper shows where teeth touch, but not how hard or in what order. He describes Dr Robert Kerstein's lecture polls, where most dentists misjudged which marks were heaviest. Jaz adds that the T-Scan identifies which marks need adjusting, and gives you a record of the occlusion before and after adjustments.

QUESTION:
How does the T-Scan help with implants?
ANSWER:
Jeremy explains that natural teeth compress slightly in their sockets while implants barely move, so an implant crown shouldn't be the first contact. When you mark a tooth as an implant in the software, the T-Scan alerts you if it's loading early, and shows which contact to adjust. He believes implants that load early are at risk of bone loss.

QUESTION:
Who is suitable for DTR?
ANSWER:
Jeremy stresses that DTR isn't for everyone. Patients need canine or incisal overlap, which may first require orthodontics, so large Class II overjets are often unsuitable. He triages patients, only suggesting DTR to those who are suffering, and never selling it. Jaz advises following guidelines and offering conservative care first.

QUESTION:
How are DTR adjustments carried out?
ANSWER:
Jeremy describes keeping the holding contacts, such as cusp tips, central fossae and marginal ridges, while removing small amounts of enamel that cause posterior contact in sideways movements, guided by the T-Scan and articulating paper. He aims for posterior disclusion in under half a second, and says treatment usually takes four to six appointments.

QUESTION:
Why does DTR need EMG?
ANSWER:
Jeremy explains that EMG sensors on the temporalis and masseter muscles show what the muscles are doing during each movement. A disclusion time under half a second may not be enough for every patient; some need shorter times. Without EMG, he says, you can't tell whether the adjustments are actually calming the muscles.

QUESTION:
What should I consider before buying occlusion technology?
ANSWER:
Jaz suggests asking whether the technology suits the dentistry you do, as single-tooth dentists may not need it, while those doing implants or full-mouth rehabilitation may benefit most. He advises checking that your lab can use the data, that support is available in your country, and that you can get proper training.

ABOUT THE GUEST

Dr Jeremy Bliss qualified from UCL in 1985 and has owned a single-surgery practice in Temple Fortune, north-west London, for 29 years. He has a strong interest in dental technology, including lasers, CEREC and implants, has used the T-Scan since 2023, and is a certified DTR provider, trained by Dr Robert Kerstein.

- Bliss Dental: blissdental.co.uk
- DTR Dentists: dtrdentists.co.uk